[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery

Search This thread

Klejdi90

Senior Member
Jul 7, 2013
221
36
UK
I don't see Albanian in the language files of MiniCM (Not in my original 2.1 language files either btw).


I'm sure its in the 2.1 as I used Albanian while I was on stock (2.1.1.A.0.6). I'm not too sure about MiniCM but the beginning of the keyboard file on MiniCM is below and the label must be as on here. Where are languages stored system/usr/zi? If so i didn't find Albanian there either, If i take the language file from the 2.1 stock can i just add it to that location? Or will that not be enough to make it appear in the phone:confused:


<?xml version="1.0" encoding="UTF-8"?>

<!-- ********************************************************************* * ____ _____ _ * * / ___| ___ _ __ _ _ | ____|_ __(_) ___ ___ ___ ___ _ __ * * \___ \ / _ \| '_ \| | | | | _| | '__| |/ __/ __/ __|/ _ \| '_ \ * * ___) | (_) | | | | |_| | | |___| | | | (__\__ \__ \ (_) | | | | * * |____/ \___/|_| |_|\__, | |_____|_| |_|\___|___/___/\___/|_| |_| * * |___/ * * * ********************************************************************* * Copyright 2010 Sony Ericsson Mobile Communications AB. * * All rights, including trade secret rights, reserved. * ********************************************************************* -->

<!-- Language name : Albanian code : sqi visual code : sqi script : latin -->
 
Last edited:

Klejdi90

Senior Member
Jul 7, 2013
221
36
UK
I don't see Albanian in the language files of MiniCM (Not in my original 2.1 language files either btw).

I went back to stock to take these screenshots, I'm really puzzled if the files aren't there how can the language be used:confused:
 

Attachments

  • 20131003201422.png
    20131003201422.png
    35.3 KB · Views: 129
  • 20131003201446.png
    20131003201446.png
    41.5 KB · Views: 133
  • 20131003201527.png
    20131003201527.png
    30.6 KB · Views: 127

SmG67

Senior Member
May 2, 2012
2,128
849
I went back to stock to take these screenshots, I'm really puzzled if the files aren't there how can the language be used:confused:

Have a look at the build-prop of 2.1 to see which language-code is set. Maybe you can use that code in the MiniCM7 build.prop to get Albanian language.
 

Klejdi90

Senior Member
Jul 7, 2013
221
36
UK
Have a look at the build-prop of 2.1 to see which language-code is set. Maybe you can use that code in the MiniCM7 build.prop to get Albanian language.

"ro.product.locale.language=en
ro.product.locale.region=GB" :eek: Very confusing. It doesn't make sense Its on the phone but the files show nothing.:crying:
 

andyblessing

Senior Member
Feb 17, 2013
212
12
Winneba
Just rename it into .ftf
Some sites name it as .zip and u should rename it to .ftf after download...

Sent from my E15i using xda app-developers app
 

mortadelax

Senior Member
Sep 17, 2011
205
30
La Plata
so there us no need to flash the original firmware again?
i mean i am on 4.1 rom. that means i have to flash this kernel, and then via recovery i will flash a gb rom. thats it??

That's right. I would recommend to put the gb rom and gapps on SD before flashing the kernel. I don't like the CWM SD mounting.
So... flash the kernel and then via CWM flash the rom and gaps.
 

SmG67

Senior Member
May 2, 2012
2,128
849
so there us no need to flash the original firmware again?
i mean i am on 4.1 rom. that means i have to flash this kernel, and then via recovery i will flash a gb rom. thats it??

That's right. I would recommend to put the gb rom and gapps on SD before flashing the kernel. I don't like the CWM SD mounting.
So... flash the kernel and then via CWM flash the rom and gaps.

Don't forget you need to format /system, /data and /usr partitions on nAa-14 to get them back to their original sizes. And it's best to do a factory wipe before you flash the nAa-14 kernel, it might not boot into CWM otherwise.
 

wolf6621

Member
May 12, 2010
13
2
blinking yellow light

greetings!

My x8 won't boot up. Even if i plug in the new charger. With the charger it can boot in recovery , but not more.

The only thing is the yellow light blinking when the phone is turned on while on charger.

Any idea?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 171
    Search no more. This is THE kernel for your gingerbread x10mini pro.


    Before unlocking your bootloader, read this thread
    If you brick your device, you are the sole responsible.



    Features:
    • Based on stock 2.6.29 SE sources
    • Upgraded to Linux kernel version: 2.6.29.6
    • Ported various components from 2.6.35 / 38
    • Significantly fast booting time (~25 secs from power button to lockscreen)
    • CWM recovery 5.0.2.7 in kernel
    • Netfilter support / AP support / Usb tethering
    • Swap support
    • Tun/Tap
    • Mddi fix
    • Ext3/4 support
    • Modules auto-copying at boot
    • Dual touch options:
      - Fake dual touch in kernel (thanks to andrej456) (default)
      - Modular fake dual touch in kernel (thanks to doixanh)
      - Modular no dual touch
    • Many CPU freq governors to chooce from: interactive, interactivex, minmax, smartass, smartass2, scary and savagedzen
    • Modular Undervolt
    • NOOP ioscheduler
    • TINY RCU
    • DM_CRYPT_GLOBAL_WORKQUEUES
    • Ramzswap for compcache
    • Offline charging embedded in the kernel
    • Stable and fast oveclocked frequencies (not enabled by default)
    • Frequency table: 19MHz - 864MHz
    • Default CPU governor: interactive
    • Two way call recording (might be against the law for some countries, you are responsible for using this feature)
    • Interface Stat support for ICS
    • Memory management and binder improvements from gb kernel
    • Many, many feature and stability patches from various kernel sources
    • ICS DRM support

    IMPORTANT:
    • For wifi to work, the ROM MUST have Wifi built from sources as in CM. If this is not the case, the Wifi WONT work, DON'T compain here about that.
    • For vibration, the ROMs need to use the gb implementation.

    FAQ:
    If you have any issues, please read the FAQ thread first: http://xdaforums.com/showthread.php?t=1266911

    Requirements:

    Install:

    Uninstall:
    • Flash back to stock using Flashtool or SEUS.

    Performance:
    attachment.php
    attachment.php
    attachment.php


    Sources:
    The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
    https://github.com/nobodyAtall/nAa-kernel

    Credits: the_laser, FreeXperia and the rest of XDA devs who helped bypassing the bootloader!
    DaRk_dOg for his awsome boot logo ;)

    Donate:
    If you are enjoying my work please consider donating: .
    Donations are voluntary but allow me to spend more time on this project.


    Disclaimer:
    I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
    49
    nAa-14
    • ICS DRM support
    nAa-13
    • CWM Recovery 5.0.2.8
    • Fixed boot into recovery issues
    • Latest gingerbread busybox and init
    • Panic timeout set to 1sec for shakira
    nAa-12
    • Fixed touchscreen multitouch modules to load
    • Kernel boot animation
    • Memory improvements from ICS
    nAa-11
    • Proximity and Lightsensors report events as they should now
    • Fix for robyn keypad
    • CWM support for formatting sd-ext
    • CWM for shakira is no longer ldpi
    nAa-10
    • msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
    • acpuclock: Improved overclocking from 2.6.35
    • shakira: keyboard reset with HOME + POWER
    • pmem: Porting pmem from 2.6.35
    • Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
    • Module for disabling dual touch altogether
    • Performance governor selected in recovery
    • NOOP ioscheduler (faster for android)
    • + 2MB More RAM (184MB in total)
    • Cypress touchscreen fixes for notification bar pull up
    nAa-09
    • Updated CWM recovey to the latest version (5.0.2.7)
    • Interactive governor selected in recovery
    • Minor smartassv2 fixes
    nAa-08
    • Significantly faster booting time (~25 secs from power button to lockscreen)
    • Less crasses regarding reboot
    • Jhash improvements
    • Two way call recording
    • Modular dual touch based on dx's DT (replaces existing DT if insmoded)
    nAa-07
    • Offline charging
    • Improved overclocking frequencies in kernel (no overclocking module needed for over 600MHz)
    • Interface Stat support for ICS
    • Sleep improvements for armv6
    • Implemented WLOD on kernel panic
    nAa-06
    • Ported latest akm8973 sources to work for the mini
    nAa-05b
    • Usb mounting via CWM
    • DDMS screen capture
    nAa-05
    • Updated USB drivers to semc GB sources
    • New gb vibrator implementation
    • Cpu frequency fixes
    • Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
    • CIFS and utf8 support
    • CWM 5.0.2.3
    nAa-04
    • Update to Linux kernel 2.6.29.6
    • NPARTS event support for disk devices
    • All around Improvements and bug fixes in:
      BFQ, mutex adaptive spins, mm, irq, mmc, cpufreq, hrtimer, mtd, memcpy/memmove, yaffs
    • Removed FPS uncap since it caused issues with scrolling and with some apps
    • Gingerbread init/init.rc
    • Boot logo
    • Fixed ddms screen capture
    nAa-03
    • BFQ ioscheduler
    • TINY RCU
    • DM_CRYPT_GLOBAL_WORKQUEUES
    • Removed FPS Cap
    • Display power-off optimizations
    • Droidwall support
    • Memory management and binder improvements from gb kernel
    • scary and savagedzen CPU governors
    • Export scaling_available_frequencies attr in /sys
    • Ramzswap support for compcache
    • Many bug fixes and optimizations from upstream regarding:
    • mm, cifs, sctp, timed_gpio, net sockets, tcp, fs: pipe.c, yaffs, ext4, dm-crypt, arm, sctp

    nAa-02
    • Ext3/4 support
    • Modules auto-copying at boot
    • Fake dual touch in kernel (doixahn's 007)
    • CPU freq governors: interactive, interactivex, minmax, smartass, smartass2

    nAa-01
    • Netfilter / AP support (WiFi tethering)
    • Swap support
    • Tun/Tap in kernel
    • Mddi fix in kernel
    • Modular Overclock / Undervolt
    • CWM recovery v4.0.1.5 in kernel
    34
    Hi folks!

    nAa-10 is ready for use. Changelog for this build:
    ### nAa-10:
    * msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
    * acpuclock: Improved overclocking from 2.6.35
    * shakira: keyboard reset with HOME + POWER
    * pmem: Porting pmem from 2.6.35
    * Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
    * Module for disabling dual touch altogether
    * Performance governor selected in recovery
    * NOOP ioscheduler (faster for android)
    * + 2MB More RAM (184MB in total)
    * Fixed touchscreen pull up notification bar (vertical and horizontal)

    NOTE: Kgsl 1.1 is compatible only with MiniCM7-2.1.8 for the time being.

    Enjoy!
    23
    Hi all,

    nAa-09 released!

    Changelog for this kernel:
    ### nAa-09:
    * Updated CWM recovey to the latest version (5.0.2.7)
    * Interactive governor selected in recovery
    * Minor smartassv2 fixes

    Have fun ;)
    22
    Hi folks!

    nAa-12 is released with small performance and awesomeness based tweaks:
    * Fixed touchscreen multitouch modules to load
    * Kernel boot animation
    * Memory improvements from ICS

    Enjoy!