Hi all,
I've recently replaced my N7105 screen assembly. I am able to turn the phone on, but the screen remains entirely blank. However, it responds to touch and appears to be working - only no image is displayed on the screen.
I suspect I've damaged a component on installation of the new screen, or have incorrectly connected it to the logic board. The replacement screen was from etradesupply and I imagine is almost definitely not an official Samsung component - is their any chance of driver incompatibility?
I've demonstrated the problem and displayed the connectors in this short video:
[Apparenlty I can't post links! Video is available by searching "N7105 Screen Problem" on YouTube]
If anyone has any suggestions, I'd be very grateful.
Best.
I've recently replaced my N7105 screen assembly. I am able to turn the phone on, but the screen remains entirely blank. However, it responds to touch and appears to be working - only no image is displayed on the screen.
I suspect I've damaged a component on installation of the new screen, or have incorrectly connected it to the logic board. The replacement screen was from etradesupply and I imagine is almost definitely not an official Samsung component - is their any chance of driver incompatibility?
I've demonstrated the problem and displayed the connectors in this short video:
[Apparenlty I can't post links! Video is available by searching "N7105 Screen Problem" on YouTube]
If anyone has any suggestions, I'd be very grateful.
Best.
