[ROM] JACxHEROSkiv2.2- JAC/CC (JAC-SKI HTC KERNEL BFS-240) Dream/Mytouch 9/30/09

Search This thread

jigdagod

Senior Member
Feb 8, 2009
196
1
FOR ALL YOU WITHOUT WIFI, just pull wlan.ko from /system/lib/modules/ in 2.4r2, worked great for me :)

not sure why, but the md5sum is diff, maybe it had to do with the https thing ? *shrugs* great work jac, this is one of the better ones!

unzip the jac2.4r2 update, look in system > lib > modules > wlan.ko

cp it to your desktop

ADB: (you don't have to even worry about rebooting, it works immediately after you push the file)

change to the directory you have put it, and type:
adb remount
adb push wlan.ko /system/lib/modules/wlan.ko
adb shell sync

FOR TERMINAL:
put the wlan.ko in the root of your sdcard
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/wlan.ko /system/lib/modules/wlan.ko


reboot your system (actually it worked instantaniously for me,
THANKS JAC AND DRIZZY AND EVERYONE, :) you all rock ;) i wouldn't know how to do this without all of you (lucid, haykuro, stericson, everyone)

worked instantly thanks for this tip.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    WWARNING:You must Have The Correct Radio and Latest SPL! You can find them here (RADIO MUST BE INSTALLED FIRST) You can find it here

    PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!


    First A big thanks to Haykuro for providing the system dump of the latest known Hero build. Great contributions from Haykuro always!!! Make sure to thank him!!!

    This ROM is based off the latest "HTC" ROM leak 2.83.x.x with tons of mods enjoy!!


    DO NOT RUN ANY OTHER APPS2SD APPLICATIONS ON THIS BUILD. YOU WILL BREAK YOUR SYSTEM. THEY ARE NOT NECESSARY BECAUSE THIS ROM WILL DO A2SD AUTOMATICALLY AND BETTER!

    NOTES:Swap is linux-swap by default. Edit the user.conf in /system/bin to change swappiness etc. Compcache modules built with the latest source are included if you want compcache or compcache with backing etc. Run sh /system/bin/swap -s to check swap status and other mod values.

    JacHEROSki-v2.2 - Experimental A & B
    A
    -2.6.29.6-jac-ski root@DesertLake-Labs
    -BFS 240
    -supports MyTouch out of the box!
    -MT
    -various ramconsole and usb patches
    -other things I can't think of

    B
    -same as A with the 10MB RAM hack (10 extra MB of RAM)
    -other things I can't think of


    KNOWN ISSUES
    -This ROM will auto-mount, so when flashing make sure it isn't plugged into your computer!
    -People search still force closes.

    JACxHEROSki-v2.1 - Experimental
    -2.6.29.6-jac-ski root@DesertLake-Labs
    -BFS-211 w/ updated dalvik etc
    -fixed reboots (none in 8 hours)
    -please note this is an experimental build FAST
    -compcache and compcache backing enabled by default

    DEFAULT VALUES
    memlimit: 32
    swappiness: 60

    RECOMMENDED VALUES
    linux-swap partition = 64MB


    JACxHEROSki-v2.0
    -New Kernel and Compcache Modules swap_free now working
    -removed app scripts as they conflict with BFS
    -MT now working!

    JACxHEROSki-v1.7r2
    -Remixed 1.5/1.6 with the latest 2.83.x.x HTC Hero Dump
    -Kept Old Mms.apk
    -Removed Plurk related .apk's (I dont like plurk :))
    -Updated Modules with backing swap bugs fixed
    -Updated libs from dump
    -Compcache with Backing Swap now on by default instead of Linux-Swap (Still need the 3rd partition for backing swap!)
    -added back the ophone dropdown
    - Everything else reads as 1.6r2a does :)


    JACxHEROSki-v1.5r2
    - Thanks to Haykruo for the 1.79.482.3 Hero Dump .img's
    * New 2.6.29 kernel by JAC-Ski w/perf patches
    * Enhanced ramdisk with auto EXT2/EXT3/EXT4 A2SD Support!!
    * Cyanogens Apps2SD with a2sd ran before user runtime starts
    * Includes E2FSProgs for checking and converting Ext filesystems (Thanks Cyanogen!)
    * Apps2SD is automatic. All you need is a second partition.
    * Supports ext2/ext3/ext4 for Apps2SD
    * Squashfs/Cramfs Support
    * Linux-Swap is automatic! All you need is a linux-swap partition (32MB~)
    * fsck at boot (should stop FS corruption)
    * Tweaked frequency scaling options to be more responsive (Thanks Cyanogen!)
    * Maximum CPU scaling frequency set to 528MHz
    * TCP buffer changes
    * PATH variable updates
    * Calls to /data/init.rc /system/init.rc
    -Latest BusyBox with working Modprobe
    -Module updates
    -Working Audio/Modified for better speaker/mic clarity
    -Shafty's LED fixes on boot (not perfect)
    -Auto backlight turned off by default in build.prop
    -rwsystem, rosystem for easy remount from terminal (Thanks Soulife!)
    -lucid already in /system/bin
    -DalvikVM optimized
    -Multi-Touch
    -Compcache 0.6+ modules included
    -Linux-swap support
    -swap is controlled via user.conf in /system/bin
    -Flash 9


    Added Items
    added ext2/ext3 tools to /system/bin
    added Lucid script to /system/bin
    added SDcard placeholder
    added Telnet Binary
    added BusyBox
    added Java.apk (thanks xDan)
    added Voice Search
    added Wifi tether
    added Superuser Binary
    added sysctl.conf
    added Haykuro's APN list
    added HCItool to /system/bin
    added Terminal
    added EN_US to Locales

    Removed Items
    removed Learnmore.apk from HTC
    removed HTC PCSync
    Everything else has a function for someone or another remove via terminal if you dont want Stock etc


    PLEASE SUBMIT BUGS HERE http://code.google.com/p/jacheroplus


    **********************************************************PLEASE READ BEFORE INSTALLING**********************************************************************

    Please use Cyanogen's recovery image it is awesome!

    First step for 2.63 is to setup our SDcard...back your stuff up and lets go!

    Formatting you SDcard

    You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2

    You need Recovery image 1.31 to do this folks!

    To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!

    You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted. DO NOT USE MORE THAN 32MB SWAP!!!

    Example for 8GB card (this example plays it safe and will leave a small amount leftover regardless of the 8GB card)

    Reboot and enter recovery
    Enter console
    #parted /dev/block/mmcblk0
    #print (to verfiy we know what size card we are dealing with, the details should be straight forward)
    rm 1
    rm 2
    mkpartfs primary fat32 0 7200
    mkpartfs primary ext2 7200 7700
    mkpartfs primary linux-swap 7700 7732

    #print (to verify we have the 3 partitions)

    Example for my 4GB card

    #parted /dev/block/mmcblk0
    #print (to verfiy we know what size card we are dealing with, the details should be straight forward)
    rm 1
    rm 2
    mkpartfs primary fat32 0 3420
    mkpartfs primary ext2 3420 3932
    mkpartfs primary linux-swap 3932-3964

    Example for a 2GB card playing it safe

    #parted /dev/block/mmcblk0
    #print (to verfiy we know what size card we are dealing with, the details should be straight forward)
    rm 1
    rm 2
    mkpartfs primary fat32 0 1200
    mkpartfs primary ext2 1200 1700
    mkpartfs primary linux-swap 1700-1732


    "End?" you need to place the last value for the linux swap eg.3964 for my 4GB card

    #print (to verify we have the 3 partitions)

    Next we need to "quit" parted and upgrade our ext2 partition to ext3

    #upgrade_fs

    Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script

    For a longer more detailed parted turorial read this

    Flashing the ROM


    The second part is getting the ROM on our phone

    Copy the ROM to you sdcard as update.zip, enter the recovery console via home+power and lets flash, Check ext filesystems first, if it tells you to go to console to manually check do it! After I've repaired the EXT partition or if it didn't need repair I will now wipe and then apply the update and reboot...Done!

    See this thread for a FAQ/Walkthrough a forum member created about Hero and installing it on your G1 http://xdaforums.com/showthread.php?t=534461

    Configs
    To use only linux-swap
    -set compcache=0
    -set cc_backingswap_en=0
    -set linux_swap_eanable=1

    To use only compcache without backing_swap
    -set compcache=1
    -set cc_backingswap_en=0
    -set linux_swap_eanable=0
    -set cc_disksize=32 (32*1024 = 32768kb = 32MB)
    -set cc_memlimit=0

    To use compcache with backing_swap
    -set compcache=1
    -set cc_backingswap_en=1
    -set linux_swap_eanable=0
    -set cc_disksize=0
    -set cc_memlimit=8

    To use compcache with linux swap
    -set compcache=1
    -set cc_backingswap_en=0
    -set linux_swap_eanable=0
    -set cc_disksize=32
    -set cc_memlimit=0
    -set linux_swap_en=1

    originally posted by uwonsum


    ****************************************************************************************************************************************************************



    DOWNLOADS

    JACxHEROSki-v2.2a please give 15 minutes to upload
    http://www.justanotherdev.slackdev.com

    JACxHEROSki-v2.2b please give 15 minutes to upload
    http://www.justanotherdev.slackdev.com

    JACxHEROSki-v2.1
    http://www.justanotherdev.slackdev.com

    JACxHEROSki-v2.0
    http://www.justanotherdev.slackdev.com

    JACxHEROSki-v1.6r2b & 1.5_to_1.6r2b.zip
    http://www.justanotherdev.slackdev.com

    JACxHeroSki-v1.5r2 SYM/BIND APPS2SD
    http://www.justanotherdev.slackdev.com

    All builds can be found here if you don't see the one your looking for linked
    http://www.justanotherdev.slackdev.com
    http://altepeter.com/justanotherdev/


    I would like to thank daproy, JesusFreke, Cyanogen, Haykuro , xDan, Sangeet.003, Twisted Umbrella, db.hates.you, xrevox and everyone else in the android community helping out with this and other ANDROID projects.


    I'f you like what I do, please consider donating here

    If you like my work visit me at my Twitter.
    1
    I was using that one but I hated how it didn't adjust to 24hr and it didn't use the flip animation until I tried this:



    Thank you, didn't notice that the gps wasn't on, now the HTC clock widget works perfectly...

    Your very much welcome....
    1
    rosie may have been slowed a tad, but i believe that app response has improved drastically over earlier non-bfs builds.
    1
    K
    Kidd_Hanma
    Thank you the remix is running smooth, audio is working for camcorder aswell.
    someone had mention before and they are correct this is running as smooth as cyan, and without any configurations tweaks. :)

    yeah even though it is RECOMMENDED to run with 64mb im running with 96mb right now and its still smooth...GOOD STUFF PPLZ!!