Tweaked Micromax A116i Rom Ver. 1.0A [Updated Stock ROM] [5-Jan]

Google play store or other features of stock apps in stock is from original stock (Oct or Nov 2013) and when you flash rom and connect internet, the play store or other things should get updated automatically. This is tweaked Factory Stock and not a custom rom which are updated on regular basis.


I have made this for ...
(1) users who want to restore to original stock in case of brick or bootloop and may be who lost recovery too in worst case scenario (sptools version)
(2) users who want to use original stock but with great tweaks I have implemented. (cwm version)
(3) devs who want to use a good build of stock for making custom roms or porting.

Features:

• Two versions: Normaland Fully Tweaked Stock ROM for A116i and A116
• Louder Sound
• Fast Network Speed (Browsing)
• WiFi Fast connect
• Also for FLY IQ451 / MYphone919i / Wiko Cink Five / Qmobile A600
• This rom uses Stock Kernel
• WORKING OTA UPDATE
• Rooted Stock
• Busyboxed
• Deodexed
• Zip-Aligned
• Super Smooth
• Super Responsive Touch
• Great Battery Backup.
• Everything Original Stock Apps
• Lighter Sony Bravia 2 Tweaks
• MMX Registration , Games and Bloatware removed (more will be removed soon)
• Init.d support with small app (check Addon section below)
• Option to install 4.3 camera or revert back to stock 4.2 (check Addon section below)
• Built from A116i : MMX Build ver: S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER

Note:

• Please do not tell me its same stock rom as before, I know that. But this tweaked version and is much better than any previous stock roms

Try it and post feedback.

Installation:

1. Copy zip on sdcard
2. Reboot to recovery CWM/TWRP
3. Do Full Factory Reset (Full Wipe)
4. Flash Rom and reboot. Done!

Bugs:
A minor bug: Shows Blank wallpaper at first boot. Just select any new wallpaper and reboot. Done!


Many Download Options:

1. Rooted , Busyboxed , Fully Tweaked , Deodexed , Zip-Aligned, Bloatware removed version.
   DOWNLOAD
   **This is CWM/TWRP version for all.
   .
2. Unrooted, Factory Raw Stock (odexed) , No apps removed, Not tweaked (AS IS).
   DOWNLOAD
   **This is CWM/TWRP version for anyone who wants to experiment with original rom (Not for everyone)
   .
3. SPTOOLS version ROM with (TWRP 2.5.0.0) and SPTOOLS (SP_Flash_Tool_v3.1304.0.119)
   DOWNLOAD
   ** Download this version. Do not download original version given below
   ** SPTools Installation Instructions in second post below.
   .
4. Original SPTOOLS version ROM directly from original moulinsky site (with blank stock recovery)
   DOWNLOAD
   ** Do not download this version.
   ** SPTools Installation Instructions in second post below.

Addons/Patches/Mods:

1. Init.d Support: Install Univ_init.d_enabler.APK. Click on "Activate" & Done! Tested OK! (refer post)
   (*Optional and for advanced users only, who want to experiment with mods made for init.d folders. Everyone else can ignore this patch.)
2. Flash Stock 4.2 Camera: Download (if you need the original one) 1088p video recording.
   *Optional
3. Flash Stock 4.3 Camera: Download (the one which is included in this rom)
   *Optional
4. UPDATED KITKAT4 LAUNCHER COMBINATION by CMahendra for SLD Rom (Download and Install from here) (NEW)
   *Optional App. *Only launcher, no additional apps included.

(WARNING: Use at your own Risk. You lose warranty of device. I am not responsible for your bricked phone.)

XDA:DevDB Information
[ROM] Tweaked Micromax A116i Factory Stock Deodexed Rooted [BASE], a ROM for the Micromax A116

Contributors
cmahendra

Version Information
Status: Testing

Created 2014-01-03
Last Updated 2014-01-03

INSTRUCTIONS FOR FLASHING VIA SPTOOLS METHOD
==============================================
Please Read carefully.


Using Flash Tools to Flash TWRP/CWM Recovery to A116


Requirements:

TWRP/CWM Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)

Steps To Follow:-

1. Install drivers for your phone using Micromax drivers.

2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.

3. Extract and open the SP Flash Tools.

4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.

5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.

6. Switch off your phone (Remove the battery to make sure it is switched off).

7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.

8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.

9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).

10. After the process completes, a green ring will appear on your device signalling that the process was successful.

11.Disconnect your phone.
==========================================
Hope this helps.
==========================================

TWRP 2.5.0.0 :
Included in third download or here

CWM 6.0.3.3 :
http://www.mediafire.com/?hk5guk5f8a0xu4x

Mt6589 Scatter File :
http://db.tt/JjMl15wO

SP Flash Tool v3.1304.0.119 :-
http://d-h.st/Dmi

Drivers:-
http://www.mediafire.com/download.php?nv96xclhjmaiclu

64bit drivers:-
http://xdaforums.com/show....php?t=2206421

*TWRP 2.5.0.0. is flawless tested working.
*CWM 6.0.3.3 is also good.

Credits: Instructions and links from Kumar Abhishek's old post. Thanks dude!

INSTRUCTIONS FOR FLASHING VIA SPTOOLS METHOD
==============================================
Please Read carefully.


Using Flash Tools to Flash TWRP/CWM Recovery to A116


Requirements:

TWRP/CWM Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)

Steps To Follow:-

1. Install drivers for your phone using Micromax drivers.

2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.

3. Extract and open the SP Flash Tools.

4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.

5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.

6. Switch off your phone (Remove the battery to make sure it is switched off).

7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.

8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.

9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).

10. After the process completes, a green ring will appear on your device signalling that the process was successful.

11.Disconnect your phone.
==========================================
Hope this helps.
==========================================

TWRP 2.5.0.0 :
Included in third download or here

CWM 6.0.3.3 :
http://www.mediafire.com/?hk5guk5f8a0xu4x

Mt6589 Scatter File :
http://db.tt/JjMl15wO

SP Flsh tools:-
http://mtk2000.ucoz.ru/down7/FT3.13.04.rar

Drivers:-
http://www.mediafire.com/download.php?nv96xclhjmaiclu

64bit drivers:-
http://xdaforums.com/show....php?t=2206421

*TWRP 2.5.0.0. is flawless tested working.
*CWM 6.0.3.3 is also good.

Credits: Instructions and links from Kumar Abhishek's old post. Thanks dude!

ravi776 said:

stock 4.3 camera, does it replaces the cam application or add another 1...
iam on MIUI rom and wanted to try the 4.3 camera for that..
Plz tell me hw to revert if i mess up with it....

Click to expand...

Click to collapse

Camera 4.3 Patch is made only for stock and it replaces the 4.2 or vice versa. I dont know what will happen with MIUI.
1) Firstly, I will suggest "Dont try".
2) Secondly, if you still want to "Try at your own risk" after taking nandroid backup
3) Do whatever you want to man, coz phones do not explode on faces for any misadventure.

shishirdbhat said:

Hi, an absolute newbie here looking for custom ROMs for my Canvas A116 and your ROM looks like the best option. I had a couple of questions:

1. By "Stock ROM" do you mean it is the pure Google Android found on their Nexus devices? If not, are there any such ROMs for my device?

2. By "Working OTA Update" do you mean I can get future versions of Android (like Kitkat) OTA?

Thanks!

Click to expand...

Click to collapse

By stock ROM he means what OEM MMX has provided with no modifications, if ur looking for nexus style I suggest u can either try superluminadad or oppo r819 stock the earlier is themed aosp android where as the latter is built by oppo as an aosp n ported
2nd question yes thats what he means quite directly

Sent from my Micromax A116 using Tapatalk