Rom 4.0.4 - v30А - available for download!!
- Thread starter lgp500user
- Start date
Trying to upload to my dropbox, but the upload keeps failing
can u try on mediafire/ dev host..
Smartflash Follow steps, but where is
---Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
you add
Click the browse button next to 'AP Bin:' and select the firmware (BIN) file
ul.to
multiupload.biz
Mediafire is a good choice..at least it resume supports...If it contains CP and AP .fls/.bin files then u need to smartflash it.
(hope u know how to use smartflash tool..
)
The waiting has finally paid off!
Guys, use this: http://www.multiupload.nl/Z4413CU6XN
Pick the MultiUpload Direct Download link & you will get full speed. I downloaded it in 6 minutes
Guys, use this: http://www.multiupload.nl/Z4413CU6XN
Pick the MultiUpload Direct Download link & you will get full speed. I downloaded it in 6 minutes
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 SecSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 SecSI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 SecSI Download start
00:28.0 Sec :Set FLASH address
00:29.4 SecSI Download success
00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:33.9 Sec :Erase was executed rightly!
00:34.1 Sec :Set FLASH address
00:40.3 Sec :Aeneas Download success
00:40.3 Sec :Code Download start
00:40.7 Sec :Erase was executed rightly!
00:40.9 Sec :Set FLASH address
02:55.3 Sec :Code Download success
02:55.3 Sec :Num of partitions are 7
03:05.3 Sec :Timeout error is occured
03:05.3 Sec :error!
Cant get this to work...
ownload Start...00:02.0 Sec :RomBinary Download start
00:02.0 Sec
SI RAM writing start00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec
SI RAM writing end00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec
SI Download start00:28.0 Sec :Set FLASH address
00:29.4 Sec
SI Download success00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:33.9 Sec :Erase was executed rightly!
00:34.1 Sec :Set FLASH address
00:40.3 Sec :Aeneas Download success
00:40.3 Sec :Code Download start
00:40.7 Sec :Erase was executed rightly!
00:40.9 Sec :Set FLASH address
02:55.3 Sec :Code Download success
02:55.3 Sec :Num of partitions are 7
03:05.3 Sec :Timeout error is occured
03:05.3 Sec :error!
Cant get this to work...
can u upload in rapidshare or mediafire or devhost plz..The waiting has finally paid off!
Guys, use this: http://www.multiupload.nl/Z4413CU6XN
Pick the MultiUpload Direct Download link & you will get full speed. I downloaded it in 6 minutes
---------- Post added at 06:13 PM ---------- Previous post was at 06:13 PM ----------
sometimes happens if USB is loose..00:00.0 Sec
00:02.0 Sec :RomBinary Download start
00:02.0 Sec
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec
00:28.0 Sec :Set FLASH address
00:29.4 Sec
00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:33.9 Sec :Erase was executed rightly!
00:34.1 Sec :Set FLASH address
00:40.3 Sec :Aeneas Download success
00:40.3 Sec :Code Download start
00:40.7 Sec :Erase was executed rightly!
00:40.9 Sec :Set FLASH address
02:55.3 Sec :Code Download success
02:55.3 Sec :Num of partitions are 7
03:05.3 Sec :Timeout error is occured
03:05.3 Sec :error!
Cant get this to work...
That is not the problem... I've tried 6 times now and checked and rechecked my cables
00:00.0 Sec
00:02.0 Sec :RomBinary Download start
00:02.0 Sec
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec
00:28.0 Sec :Set FLASH address
00:29.4 Sec
00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:33.9 Sec :Erase was executed rightly!
00:34.1 Sec :Set FLASH address
00:40.3 Sec :Aeneas Download success
00:40.3 Sec :Code Download start
00:40.7 Sec :Erase was executed rightly!
00:40.9 Sec :Set FLASH address
02:55.3 Sec :Code Download success
02:55.3 Sec :Num of partitions are 7
03:05.3 Sec :Timeout error is occured
03:05.3 Sec :error!
Cant get this to work...
This might work...(it always has worked for me when i get timeout error):
Pull the battery, go into s/w update mode, connect to computer, start flashing and IMMEDIATELY put back the battery...it may help..
For those who get errors, this is what always fixes issues for me:
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
Trust me, one of those two WILL solve it
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
Trust me, one of those two WILL solve it
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
93Official Rom from LG - v30a!!!!
This release is the same that is from 7.12.12!!!!!
---------------------------------------------------------------------------------------
links for download:
official link from lg (kdz version)
http://csmg.lgmobile.com/swdata/WEBSW/LGP990/ANEUDW/V30a_00/V30A_00.kdz
Smartflash version of the Rom
http://file.qip.ru/get/EpX_YlZ5/BIN_LGP990AT-00-V30a-EUR-XXX-N.html
mirrors:
http://www.multiupload.nl/Z4413CU6XN (thanks to sander-m)
http://www.putlocker.com/file/28C0DF5FDD929E34 (thanks to tiagorl)
Ril http://www.multiupload.nl/2764GZ1F8Q
BB http://www.multiupload.nl/0C893V659X (thanks to cojo11)
---------------------------------------------------------------------------------------
You are going to download zipped file. This The download contains the following files: (thanks to petr.klos)
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_AP.bin
LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls
---------------------------------------------------------------------------------------
For flash use Smartflash
Smartflash tutorial by PAUL (thanks to petr.klos)
I would just add, that this thread is focused on flashing sole baseband. To flash firmware (ROM) you have to add one single step.
Where is
"--Click the browse button next to 'CP Bin:' and select the baseband (FLS) file--"
you add
"--Click the browse button next to 'AP Bin:' and select the firmware (BIN) file--"
For those who get errors while flashing, this is what always fixes issues for me: (thanks to Custom40)
1) Reboot PC and just start over.
Or:
2) If you face an error in the middle of the installation, then re-plug the phone, start over but this time put the AP file in the CP bin box and the CP file in AP box.
---------------------------------------------------------------------------------------
-=How to get root=-
=1= (thanks gabrielecif)
To get root easy (no data wipe and original bootloader) go to these thread:
http://xdaforums.com/showthread.php?p=35138820#post35138820
=2= (thanks to RobYyY)
UNLOCKED BOOTLOADER+CWM6+ROOT
o2x-nvflash-bootloader_unlock_v30a+CWM6.zip
♦unzip attached archive
♦put your phone into nvflash mode(don't know how? use search button)
♦open "flash-boot.bat"
♦put again your phone into nvflash mode
♦open "cwm.bat"
♦boot into cwm and flash SuperSU Root.zip
♦reboot and enjoy
EDIT1: Root doesn't work with su303.zip i don't know why.. but i have made a zip with supersu and root is working. have fun(supersuroot.zip is attached)
=3= (thanks to joiN85)
-After you install with smartflash v30a rom, download and flash "Bootloader unlock ICS Official" and "Recovery 5.0.2.8e v30a Official"
-Flash with NVFlash: Recovery 5.0.2.8e v30a Official + Bootloader unlock ICS Official
-Go in cwm and install "Superuser-3.1.3-arm-signed-tradotto.zip"
-Reboot
-Now you have Root
IMPORTANT!!!
Some users have charging problems (while connect your phone to charge with screen on - it breaks)
It is becouse of root in some case, without root everything is ok. Need more fredbacks for this!
Credits to Daniel Aminov, he received the link (smartflash version from 4.12.12).25UNLOCKED BOOTLOADER+CWM6+ROOT
♦unzip attached archive
♦put your phone into nvflash mode(don't know how? use search button)
♦open "flash-boot.bat"
♦put again your phone into nvflash mode
♦open "cwm.bat"
♦boot into cwm and flash SuperSURoot.zip
♦reboot and enjoy
EDIT1: Root doesn't work with su303.zip i don't know why.. but i have made a zip with supersu and root is working. have fun(supersuroot.zip is attached)
☻Instead of saying thanks hit the "thanks button"!17Compiled Links
For those that arrived later, all in one V30A links:
http://file.qip.ru/get/EpX_YlZ5/BIN_LGP990AT-00-V30a-EUR-XXX-N.html
http://goo.gl/RDqeW
http://www.multiupload.nl/Z4413CU6XN
http://premiummu.com/filez/premiumm...-V30a-EUR-XXX-NOV-30-2012+0_premiummu.com.zip
http://www.sharpfile.com/tmn8rvpkf4...UR-XXX-NOV-30-2012_2B0_premiummu.com.zip.html
http://www.putlocker.com/file/28C0DF5FDD929E34
http://rapidshare.com/files/3877594144/BIN_LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0.zip
https://docs.google.com/file/d/0ByD_hFP_Juf4WVZ3emxIU3Nabjg/edit?pli=1
Here BB/Ril
http://www.mediafire.com/?g64w5ipnx2j2iu9,7m3vnx3b1942l5o
Here BB
http://www.multiupload.nl/0C893V659X
Here RIL
http://www.multiupload.nl/2764GZ1F8Q
Rooted v30a system.img
https://docs.google.com/file/d/0B82zQdUvU4pJOUYxRG53bFdTYWs/edit
Credits for all...
