[UPDATE][RECOVERY]CWM 6.0.5.1 [Latest/Compiled from CM 11 M11 Source]

Search This thread

digyvijaykumar123

Senior Member
Nov 21, 2013
323
1,410
Koderma
NEW.jpg

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */


CWM RECOVERY 6.0.5.1 FOR A116

SYNC TO LATEST CM SOURCE
CONFIGURED TO CMUPDATER


REQUIREMENTS:-
FOR PC => Sp Flash Tool
FOR MOBILE => Root and MOBILE UNCLE TOOLS APP


BUGS:-REPORT IF ANY

DOWNLOADS-
CWM.6.0.5.1.img
CWM.6.0.5.0.img


HOW TO INSTALL:-
MOBILE

  • Download the recovery.img and Put it in root of your SDCARD
  • Open Mobile uncle tools app and select Recovery Update
  • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
  • Done


PC

  • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
  • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
  • Open the SP Flash Tools.
  • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
  • Check only recovery.img, preloader and uncheck all others
  • Switch off your phone (Remove the battery)
  • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
  • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
  • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
  • After the process completes, a green ring will appear on your device signalling that the process was successful.
  • Disconnect and reboot or go to recovery to check it.


Kernel Used:-Kash Kernel Stable

CREDITS:-
koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
@chrmhoffmann for compiling.
@kashifmin For his kernel & Support.
 
Last edited:

gregferns

Senior Member
Sep 19, 2009
1,191
136
Mumbai
Xiaomi Poco F1
OnePlus Nord
Ok Flashed this and so far its good...

Doing a backup with it....

This is a non-touch based recovery (correct me if i am wrong) .... i know what i'm about to ask is difficult, BUT CAN you port CWM touch recovery ??

Thanks
Greg
 
Last edited:

zeu55

Senior Member
Dec 27, 2010
294
69
please provide the flashable zip mobiuncle tools cant find the recovery in sdcard as well as in phone memory..
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    NEW.jpg

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */


    CWM RECOVERY 6.0.5.1 FOR A116

    SYNC TO LATEST CM SOURCE
    CONFIGURED TO CMUPDATER


    REQUIREMENTS:-
    FOR PC => Sp Flash Tool
    FOR MOBILE => Root and MOBILE UNCLE TOOLS APP


    BUGS:-REPORT IF ANY

    DOWNLOADS-
    CWM.6.0.5.1.img
    CWM.6.0.5.0.img


    HOW TO INSTALL:-
    MOBILE

    • Download the recovery.img and Put it in root of your SDCARD
    • Open Mobile uncle tools app and select Recovery Update
    • When prompt select Yes and then again yes to reboot into recovery to check it is working or not.
    • Done


    PC

    • Install USB drivers for your phone using Micromax drivers or if already installed then OK.
    • Extract the Stock ROM folder and replace recovery.img with cwm recovery which you downloaded from here.
    • Open the SP Flash Tools.
    • In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
    • Check only recovery.img, preloader and uncheck all others
    • Switch off your phone (Remove the battery)
    • In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
    • Click the Download option (present on the right of Firmware>Upgrade option) and the flash tool will start looking for your phone.
    • Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
    • After the process completes, a green ring will appear on your device signalling that the process was successful.
    • Disconnect and reboot or go to recovery to check it.


    Kernel Used:-Kash Kernel Stable

    CREDITS:-
    koushik Dutta FOR HIS CLOCKWORK-MOD RECOVERY.
    @chrmhoffmann for compiling.
    @kashifmin For his kernel & Support.
    3
    Great work thank you for this :D

    Cool bro
    Just replaced with my current recovery
    It works flawless
    +1 buddy
    :D
    Thanks for appreciating my work.
    1
    please provide the flashable zip mobiuncle tools cant find the recovery in sdcard as well as in phone memory..

    rename to recovery.img and try
    1
    update: cwm 6.0.5.1
    sync to latest cm source
    configured to cmupdater