Gingerbread is now available to everyone!
Flash this file over anything and you will have GB!
Mediafire:
ZV4
ZV6
ZV7
ZV8
ZV9
V6- 18d40c7dac1b6b428751ef3d3037efb6
V7-754799d76b450bce2c295ba20918332d
V8-81da3d04c95a2cccfee8953568bb30b1
V9-1d2ff6d22cd70adc2dc719e44f9f8613
Let the fun begin!
Flash this file over anything and you will have GB!
Mediafire:
ZV4
ZV6
ZV7
ZV8
ZV9
MD5
V4- bfcf8ec006bca32784c188d031c6202f
V6- 18d40c7dac1b6b428751ef3d3037efb6
V7-754799d76b450bce2c295ba20918332d
V8-81da3d04c95a2cccfee8953568bb30b1
V9-1d2ff6d22cd70adc2dc719e44f9f8613
Let the fun begin!
Instructions:
0. Install the software that pops up when you plug in your phone.
1. Get the LGNPST Package with the GenericModels and Components Plug-In.
http://www.mediafire.com/download.php?cghufvvn43m7bam
2. Get the driver for the phone and install it
http://www.lg.com/us/support/mc-support/drivers/LGAndroidDriver_Ver_1.0_All.exe
3. Get the Stock Rom TOT file and extract it.
[B]POSTED ABOVE[/B]
4. Get the DLL file specifically for the Revolution
http://www.mediafire.com/?4gdq6dsm643v9ur
5. Extract the "LGNPST Store & Lab"
6. Install the following order:
a. LGNPSTv1.2_Store_Version.msi
b. LGNPST_v1.2_Lab_Version.msi
c. Components >> LGNPST_Components_Ver_5_0_12_0.msi
d. GenericModels >> LGNPST_GenericModels_Ver_5_0_10_0.msi
7. Run "Right_Click_Register_DLL.reg"
8. Make a new folder called "Models" in the program's directory
Default: "C:\LG Electronics\LGNPST\"
9. Grab the "VS910.dll" and put it in the "Models" folder.
10. Right Click "VS910.dll" and click on Install/Register.
Note: DLL WILL NOT INSTALL UNLESS COMPONENTS AND GENERICMODELS PLUG-INS ARE INSTALLED!!!
IF YOU CANNOT INSTALL IT ON A RIGHT CLICK GO TO "C:\Windows\System32" and drag the VS910.dll on "regsvr32" and it should install.
a. Make sure you install it properly
b. REBOOT!!
11. Run "LGNPST"
12. Plug in your phone, use Internet Connection Mode,and enable USB Debugging.
13. Phone should pop up in the list
14. Select the phone and click on the Open folder button inside the .BIN query underneath the COM## details.
15. Since it wants a .bin file, you can open the .TOT file by typing "*.*" inside the File Name query and hitting Enter
16. Select "VS910ZV4_04.S4_04.P58008.R5.user.tot" and Click OK
17. Then click on Upgrade
18. Wait a few minutes
19. Voila
Last edited: