Have you downloaded the correct firmware? Please post results of fastboot getvar all, minus your serial and IMEI numbers.
C:\onex\Fresh.stock.4.1.jb>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.771.34
(bootloader) serialno: SH24YW105233
(bootloader) imei: 354461057761104
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3608mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.821s
This is a stock backup of your ROM: ... I suggest you load this to get back to stock. Don't forget to flash the boot image seperately and then you should be able to update manually if there is an OTA. What are you trying to achieve?
pls let me know will it work on htc one x AT&t i want to install cm 12 on it which it tells me to upgreade my h boot
Hey...my HTC one x works fine now... but I put in my sim, and it won't recognize it. When I first got phone it was on JB and worked for a min then stopped. I factory reset and it worked again for a min then stopped. Previous owner said it stopped working after he "unlocked it for a different carrier". I'm assuming he meant sim unlock. NO ruu is fixing this issue. Do you have any advice Mike?
To flash you need to run the following commands: (It is advised to take a backup of your data and important files on your sd card)Woah, thank you. How exactly do I apply that..? I really just need to upgrade my hboot so I can use JB ROMs.
Sweet, How can I cut firmware.zip from ota? Ill share with you.
Wysłane z HTC One X ° Tapatalk