[ROOT/ROM/DEV] Korean Galaxy Note Development and Support sharing

Search This thread
By:
Advanced…
R

RenzkiPH

Guest
Hey guys, I saw this thread for Android Software and Hacking General Forum. For those who have SHV-E160L firmware MB1/MB2 sources please send it to the dev from that thread. Thanks

—————————————————————————————
Want to experience Rage Performance for your Android? then Click This
 
S

shoaib17

Member
Oct 1, 2010
32
2
Hey guys, I have been trying to find the CM11 or Android 4.4 Rom for shv-e160l but couldn't find anywhere. There are many CM11 Roms for e160s/k at MATCL & other sites. I tried installing e160s/k CM11 rom on my e160l and the installation went fine using CWM, but my touchscreen stopped working except vol & power button. So I reverted back to original 4.1. Please tell me if there's any fix or modification for the touchscreen to work or it would be really helpful for all the e160l users if anyone could covert the e160s/k CM11 roms for this device. Thanks!
 
darkspr1te

darkspr1te

Senior Member
Sep 24, 2012
952
595
AFAIK there are no sources the android system , touchwiz , there are kernels available on the samsung website. the last time i check the S/K models had a newer kernel.

darkspr1te
 
darkspr1te

darkspr1te

Senior Member
Sep 24, 2012
952
595
SHV-E160L

darkspr1te said:
AFAIK there are no sources the android system , touchwiz , there are kernels available on the samsung website. the last time i check the S/K models had a newer kernel.

darkspr1te
Click to expand...
Click to collapse

kernel sources up for the DEV's out there
Code: 
git clone https://github.com/darkspr1te/kernel_samsung_msm8660_shv-e160L.git


darkspr1te
 
A

amelazio

New member
Sep 18, 2014
2
0
solved ? me to, same problem

umarfarooqleo said:
:crying: I used the code: *#2663# and it gave me access to all the touch firmware. there were 4 buttons to update different touch firmware. i touched all buttons one by one . the first two buttons took some time and then showed pass. then the next 2 buttons of S-Pen showed fail. after that my stylus isn't working. any help please!!!
Click to expand...
Click to collapse


solved? me to, same problem.. please help me.. prajurit7b@gmail.com
 
amir2418

amir2418

Senior Member
May 4, 2012
66
4
Hi all need your help guys
My Samsung Korean note E160K not booting up I've flash to official jb firmware and then went to wipe factory reset many time but device still not booting the phone stuck on samsung galaxy note logo and wont boot further so I want to downgrade to stock 2.3.6 firmware anyone share the vaild link ?? Or any suggestion?
Sent from my Nexus 4 using XDA Free mobile app
 
C

Cybernerd

Senior Member
Nov 3, 2012
56
2
ildar_prophet said:
CM11 ROM worth mentioning: http://xdaforums.com/showpost.php?p=55232427&postcount=4
Doesn't have bugs discussed above. But I experienced a sudden reboot.
Anyway I Like it.

BUT sudden reboots are really annoying. Unfortunately devs didn't use apanic so I can't even look at crash messages :(
Click to expand...
Click to collapse

Hi, any luck on finding a fix for the sudden reboot?
I thought after updating to this ROM the random reboots with green screen would go away. Please let me know. Thanks! Other than that, this build is awesome!
---------------------
Found New updates but still getting random crash from time to time.
Credits to: qwertynan/bullik01 @ ht p://4pda.ru/forum/index.php?showtopic=345668&st=1960 & ht p://4pda_ru/forum/index.php?showtopic=345668&st=2060#entry40177261
https://docs.google.com/uc?id=0B8_VRU7_i-eubGZyUldhdm1lSFk
cm-11-20150123-UNOFFICIAL-quincykt.zip same as cm-11-20150123-UNOFFICIAL-hygoandroid.com.zip
(
CRC32: 35F77D07
MD5: 2568927C2AD00A6E6435D7CF7EDEBB6B
SHA-1: 6816B6F44DD2B55A2B8AB48B8A2B764A0A2124FB
)
https://docs.google.com/uc?id=0B8_VRU7_i-euLWVqSm41cVBwRFk
pa_gapps-modular-micro-4.4.4-20141110-signed.zip
(
CRC32: EB736798
MD5: EE964BC0104F8A9C3D17DD6B88243EDA
SHA-1: 4D51F6CF62C8034178315D6BB76D1ED7AB9C3AE6
)
Cheers! :good:
 
Last edited:
J

jakeortega

Member
Oct 10, 2015
19
0
Taytay, Rizal
Root MJ1 Build

Hello Guys,

Do you have idea how to root SHV-E160S MJ1? If no possible ways to do it now, can I just update from JB 4.1.2 MJ1 to JB 4.1.2 MH2?

Thanks!
 
C

Cybernerd

Senior Member
Nov 3, 2012
56
2
Has anyone else noticed their MAC address changing every time wifi is switched on/off? Currently using cm-11-20150123-UNOFFICIAL-quincykt.zip atm.

EDIT1: Nvm. Fixed it using Phone Id Changer app via Xposed.

EDIT2: Turns out, Phone Id Changer app only makes cosmetic changes on my phone. When I check my router's list of devices connected, I still see my phone with random MAC address. :( I wonder if this is somehow connected to the random reboots.
 
Last edited:
M

Mustafaakkus

New member
Jul 30, 2015
2
0
Ankara
amir2418 said:
Hi all need your help guys
My Samsung Korean note E160K not booting up I've flash to official jb firmware and then went to wipe factory reset many time but device still not booting the phone stuck on samsung galaxy note logo and wont boot further so I want to downgrade to stock 2.3.6 firmware anyone share the vaild link ?? Or any suggestion?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse

Same problem for my E160K. How can we solve this problem? Help us please. There is anything at forums or web sites.
 
I

ildar_prophet

Senior Member
Apr 20, 2011
304
46
johan-notes.blogspot.com
Hi, everybody!
It's well-known that custom kernels (e.g. in CM11 ROMs) suffer from sudden reboots.
Do anybody know kernel(s) that are reboot-free?
Ideally I want a kernel >= 3.0.101 for the CM11 ROM . What about Tegrak kernels? are they good? Are there 3.0.101 Tegrak kernels?
 
You must log in or register to reply here.

Similar threads

JamieD81
  • Locked
[rom] [4.1.2] paranoidandroid [2.57] - [jan22] - page #4999 3.+ beta test
Replies
5K
Views
969K
KennyG123
KennyG123
bigfau
{ROM/TAB}{DXLJ2}Black ★ STAR XI
Replies
6K
Views
771K
R
rio aprianto yokz
ptmr3
|ROM||AROMA|| ---Padawan JB V4--- || Viper4Android ||4.1.2| 10|24!!!
Replies
6K
Views
846K
Negan
Negan
DAGr8
  • Poll
[ROM][UCLF6][Friday the 13th] The Hybrid RCVII is LIVE .
Replies
6K
Views
840K
GT247
GT247
DAGr8
[ROM]XLA2[04/02] SAUROM Projekt 'One Rom to Rule Them All' Support Officially Stopped
Replies
3K
Views
447K
M
mraeryceos

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 20
    dycz21
    dycz21
    Read First: Thread created ONLY for Korean Galaxy Note (SHV-E160 S/K/L ver) users. ROOT, ROM or any developments posted here cannot be used for N7000 or I717 Galaxy note ver.

    I am not responsible if you damaged or bricked your phone!! Use at your own risk!! I do not own nor created the developments posted here.

    I created this thread to post the developments and support for our beloved Korean Galaxy Note as well as to compile the tutorials inside and outside XDA all in 1 thread.

    Note: If you decide to share a recent development here, please specify/tag if applicable to all SHV models or specific model only (e.g, [e160 s/k/l] or [e160 S only]).

    Basic Commands/terms:
    1.)Download mode: Turn off the phone. When it’s completely turned off press [Volume down (-) + Home + Power]. Once you see the Korean text press Volume up (+).

    2.) Recovery mode: Turn off the phone. When it’s completely turned off press [Volume up (+) + Volume down (-) + Home + Power]. You should see the recovery mode at the top of your LCD screen (either tegrak or clockworkmod recovery). To navigate, press Volume up or down and use the power button as your “enter/ok” button.

    3.) ROOT – gaining admin access to your phone.

    4.) Root File: Some were mislead by searching for a folder named “root”. “Root” is equivalent to /sdcard (not external sdcard or a folder named “root”). So when the instruction tells you to put a specific file to the root it means that you put it inside the /sdcard.

    5.) Flash – the term “flash” in android’s world means “transfer”. When a guide tells you to “flash” partition, it implies that you transfer the contents to a partition (such as system, cache, data, boot, recovery etc…). There are different kinds of data you can flash such as recovery, rom, kernel etc. this can be done by using your PC/Laptop using ODIN for PC or Heimdall for mac or ROM Manager.

    3.) Checking your Korean Galaxy note version- Korean galaxy notes have different versions and it depends with the Korean carrier. To check if you have either S/K/L go to settings > About phone. Also note your basedband version (UI24, UH24, F09 etc….).


    Developments:

    1.) Successful debrick of Korean Galaxy note. Thanks to darkspr1te and to the contributors. You can find his page here (http://xdaforums.com/showthread.php?t=1914359&page=10).

    2.) ROOT- Before rooting your phone make sure you have upgraded to ICS 4.0.4. You can download Kies here (http://www.samsung.com/us/kies/) to upgrade or do it via phone by going to settings>about phone>system updates>check updates. Make sure your phone battery is at least over 50% . If you’re using a laptop, make sure the battery life is full or better plug it in. Don’t use a cheap cable. Please use the one you got from Samsung.

    a) [e160 s/k/l] Root instructions by jairrab: (http://xdaforums.com/showthread.php?t=1924535) I used this one to root my phone because it's easy to follow especially for root virgins. However, the instructions does not include the Clockworkmod recovery (CWM) installation. Hence, do this AFTER successfully installing the Tegrak Recovery:​

    I.) Download CWM Recovery (v6.0.1) cwm.tar here (https://www.dropbox.com/s/cyitd4ce3jq0zb4/cwm.tar)
    II.) Put the downloaded file to the root of the phone (/sdcard)
    III.) Follow the same method you used when you installed the Tegrak Recovery.​

    b) [e160L only] Root instructions by mycatisether: (http://xdaforums.com/show....php?t=1775015) found some useful info here (removing sms limit etc…) that are applicable to all Korean GN models.​

    3.) Post ROOT developments:

    a.)BACK UP! After rooting your phone I advised that you do a NANDROID back up first (requiment: CWM recovery see 2.a in development section). It is a complete back-up of your phone. So anytime you can go back to your phone’s last condition. Do the following to make a nandroid back up using the CWM recovery.​

    I.) Flash CWM recovery
    II.) Go to recovery mode
    III.) Navigate using volume up or volume down and select “back up and restore” press power key to enter.
    IV.) You should be in back up menu now. Navigate and select back up and hit the power button again. This will take awhile. Be patient.
    V.) Once the back-up is done, navigate to “reboot system now” and hit the power button.
    VI.) After reboot. Go to /sdcard and copy the clockworkmod folder to a safe place​
    .

    b.) Custom ROM:​
    1.) [e160 s/k/l] CM9 Stable – Requirements: Rooted phone with CWM recovery (see 2.a under development section above)​
    1.a) Download the following files and put inside the root (do not unzip)

    CM9 ROM (https://www.dropbox.com/s/aaz0k19ddz0xytz/cm-9.1.0-quincyskt-KUKJIN-RC2.1.zip)

    Front camera fix (https://www.dropbox.com/s/zqcjeegm6wn8vk2/old_note_front-cam_RC2.1.zip)

    Google App for CM9 (https://www.dropbox.com/s/65703m0trd38gii/gapps.zip)

    1.b) After copying the files in the root go to recovery mode (how to go to recovery mode? Read above).

    1.c) In recovery mode select > “wipe data/factory reset” and select yes. > select “wipe cache partition” and select yes. > select advance > wipe dalvik and select yes.

    1.d) After step 1.c STAY IN RECOVERY MODE and install the files you downloaded IN ORDER. Go to > “install zip from SD card” > 1st install CM9 ROM (cm-9.1.0-quincyskt-KUKJIN-RC2.1.zip) > 2nd install camera fix (old_note_front-cam_RC2.1.zip) > lastly, install Google app (gapps.zip).

    1.e) Reboot and enjoy! Do not install the Korean keyboard! Or you can just uninstall it.

    I personally use this CM9 ROM and it runs perfectly! I have no issues with the sms, battery, camera etc… All Korean bloatwares gone. No Korean keypad. Can send over 1000+ characters.

    I really recommend the “Cobalt” theme as it made the CM9 even more smoother and you can download it here for free (https://play.google.com/store/apps/...h_result&rdid=com.dustinb.theme.cobalt&rdot=1) then go to settings>themes>select cobalt (ignore the message does not contain assets etc…).

    If your SMS limit is not fixed. Download GO SMS Pro or Handcent SMS in google play store. Use it as your main messaging app. It will solve the problem.

    Some have issues with their touchscreens. To solve this you can go to dialer and dial >*#2663# (no need to press the call button). Click “Touch key FW update” then reboot.​

    2.) Other ROMs – with some research and the help of the Koreans, Chinese and Vietnamese I was able to locate the following ROMs. Please note that I have not tested these ROMs, as such I cannot guarantee if they are working properly (however, darkspr1te told us the he will test some ROMs and provide feedback – just to prevent hard/soft brick). Some ROMs I found have instructions, some do not have. I’ll post my source and you can just use google translate and read the instructions from Koreans, Chinese and Vietnamese websites. PLEASE TAKE NOTE OF THE TAGGING I MADE. (E.G., IF IT's TAGGED WITH [S/K/L] IT MEANS IT’S COMPATIBLE TO ANY KOREAN GN (SHV E160]. IF IT'S TAGGED WITH [L ONLY], IT MEANS IT’S ONLY APPLICABLE TO E160L GN VER. USE AT YOUR OWN RISK!​

    a) [S/K/L] MIUI 2.8.3 Beta (http://pan.baidu.com/share/link?shareid=80764&uk=2063664816) – known 4G and battery problems. Translated source here (http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://search.matcl.com/b/imbeded/125842).

    b) [L _UH24 ONLY] E160L UH24 GS3 style: (http://translate.googleusercontent....292641&usg=ALkJrhgNhnm3YD4P1xetBLAImDaM9vu5og

    c)[T_UI24 ONLY] UI24 Jellybean style – really don’t know what is this. You need to log-in before you can see the downloadable file (http://matcl.com/b/usertheme/126333). Not sure if ROM or theme.

    d) [S/K/L] Alpha1 ROM based on the stable CM9 above. I did not test it. Seems like icons were changed etc… You can download the ROM here ( still uploading to dropbox). See the translated original post here (http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://search.matcl.com/b/imbeded/126864) . Follow the same process when you installed the CM9 ROM above.

    e) [S_UH24 ONLY] Based on Original e160S_UH24 ROM but rooted. You can download it here (http://kuai.xunlei.com/d/JCIBDHYSVQTU) password is E160S-eruizhi (case sensitive). Translated original post here (http://translate.google.com/transla...u=http://bbs.eruizhi.com/android-229-1-1.html)

    f) [K_UI24 ONLY] Based on Original e160k_UI24 ROM but rooted. You can download it here (http://bbs.eruizhi.com/forum.php?mod=viewthread&tid=315&reltid=4&pre_thread_id=0&pre_pos=3&ext=). Translated original post here (http://translate.google.com/transla...d=315&reltid=4&pre_thread_id=0&pre_pos=3&ext=)​


    MORE TO COME... I will update the thread later.

    I find the CM9 the best-cooked ROM for our SHVs to date. All issues were resolved in this ROM.​


    d.) Recommended apps for rooted phones (just search in google playstore):​
    1.) Battery Calibration (free)
    2.) Titanium Backup (free or Pro)
    3.) ROM Toolbox
    4.) SD Maid
    5.) Superuser or SuperSU
    6.) Internet booster (really working for me)​

    USEFUL SOURCES:
    1.) http://bbs.eruizhi.com/ (Chinese Website with useful infos)
    2.) http://www.koxda.com/ (very informative but hard to get access for downloadable files.)
    3.) http://matcl.com/ (Korean Website. Most of the cooked ROMs came from this website including the CM9. No CM10 update for now.)
    4.) http://www.tinhte.vn (Very informative Vietnamese forum with lots of ROM links)
    5.) http://www.115.com (This is a download site. Use the search toolbar to search for something and if you are lucky you may find yourself a treasure)​

    QUICK FIX:
    1.) SMS Limit:
    a.) Download GO SMS PRO or Handcent SMS. Make it your default sms app.
    b.) They have other solution here (may not work to some KGN) (http://xdaforums.com/show....php?t=1775015)

    2.) Removed U+ LTE boot and shutdown animations go here (http://xdaforums.com/show....php?t=1702580).​

    SECRET CODES (courtesy of darkspr1te):

    Engineer mode 319 712 358 and then the password 0821.
    EDIT:- Use the 319712358 code to activate CP access, not service mode or phoneutil.

    *#2663# touch firmware
    *2767*3855# factory format do not use
    ##DATA# Data config menu
    ##TTY# TTY menu
    ##786# RTN repaired menu
    *#46744674# set IMSI to 9999
    *#9090# Service Mode , MDM/MSM Uart/Usb selection
    ##8778# PhoneUtil , MODEM/PDA UART/USB
    *#0*# Test menu 1
    *#0228# battery status
    ##GPSCLRX# - Reset the GPS
    *#2664# - Touchscreen Accuracy Test
    *#9900# - SysDump​
    View
    5
    A
    agentkang
    maestrobarako said:
    we badly need to see that firmware like an oxygen for our lungs..
    i wanna know if its really official JB for shv models..
    Click to expand...
    Click to collapse

    Hi, sorry for the delay. Here is the JB firmware for Korean models:

    SHV-E160L:
    https://dl.dropbox.com/u/32905926/KIES_HOME_E160LKLJMB2_704944_REV02_user_low_ship.tar

    SHV-E160S:
    https://dl.dropbox.com/u/32905926/KIES_HOME_E160SKSJMB1_704944_REV02_user_low_ship.tar
    View
    4
    darkspr1te
    darkspr1te
    As the Thread Title says.
    Support And Sharing,
    With sharing in mind I present my first Port,
    CWM 6.0.1.2 for SHV-E160L

    install via your current cwm

    Copy zip file to your /sdcard/ via adb (adb push zipfilename /sdcard/ )
    reboot into recovery either via Rom manager or select reset from power menu and hold vol up & vol down or power off device, remove battery and replace battery (USB cable Unplugged) then hold power vol up & vol down, release power when you feel vibration motor.

    It seems it's normal to also post a huge list of features in colour fonts, not going to.

    It's CWM 6 with UH24 kernal, has adb function for devss.

    Ubuntu users , if you get ??????? permissions error or adb does not work quite right then try this,

    edit /etc/udev/rules/99.android.rules

    paste following into the above file
    Code: 
    SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0e79", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="413c", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="091e", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="24e3", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2116", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0482", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="17ef", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0409", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2080", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0955", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2257", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="10a9", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1d4d", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0471", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04da", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1f53", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04dd", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0930", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="19d2", MODE="0666"

    @dycz21 could you update the front page for me, shv-e160l getting some love in the updated cwm.

    Why did i port this? , because http://builder.clockworkmod.com/ didnt work for me , it bricked my device ** warning to other users**, I will find out why and inform the web site producers, but for now i need cwm so i can work on cm10 roms :cool:
    plus i want to ensure that my debrick update works across devices so i need to set a standard recovery for all shv-e160x devices.
    next up is twrp as soon as the coffee kicks in.
    Hit thanks if it's of use you

    I will leave the boxes of big red writing to you who want to say thanks :D
    View
    4
    darkspr1te
    darkspr1te
    Support

    Hi All,
    As of today i Will no longer have my SHV-E160L note, I have decided to sell it on and upgrade. I was a hard choice i can tell you as i've had a lot of fun hacking this device. I will still try and assist all Korean note users where i can, but without the device in my hands i will be limited somewhat.
    I will also upload all of my CM10/10.1 work to my git hub if any users wish to continue my work. (github.com/darkspr1te).

    I could not think of a better crowd of people to meet in a journey like this, and other users not on this site like jcsullins and many more.

    Also all MY source code will be made public. I will post links here once i've completed uploading.

    For a time i will be using a gt-n7000 note so my research will continue but based on samsung cpu.


    Many Thanks

    darkspr1te
    View
    4
    maestrobarako
    maestrobarako
    gbhanurishi said:
    .............................................................

    Hi friend....im using E160S with build E160SKSJMC4. I searched a lot for tegrak kernal and recovery to root it, but dint get for this build. I tried downloading rooted JB file (1.2GB) but everytime it got failed after downloading around 600MB to 700MB (tried 3 times already)..

    will rooting by flashing CWM or TWRP and flashing super user.zip as explained by you work for 160S also?

    Appreciate any guidance regarding the above...
    Click to expand...
    Click to collapse

    yes the method works all the time for jellybean..

    ---------- Post added at 06:54 AM ---------- Previous post was at 06:53 AM ----------
    bearbear181 said:
    Hi there!

    I have a Korean Galaxy Note (SHV-E160K) and I have upgraded it to Android 4.1.2 using Kies. The current firmware version is PDA:JMC3/Phone: JLL6 (KTF) in Kies.

    Much to my frustration, I noticed there is no Multi-window feature available in my phone. I should be most grateful if someone could teach me how to enable it.

    Thanks!!
    Click to expand...
    Click to collapse

    download custom rom from KOXDA.com for your device. all custom roms outhere has multi-window..

    ---------- Post added at 06:56 AM ---------- Previous post was at 06:54 AM ----------
    imranrajah said:
    hi,

    does any one have login id and password for KOXDA forum.i'm looking to download roms for my e160L. i tried registering there, but Verification code is a big head ache
    Click to expand...
    Click to collapse

    register at wiebo.com.. bind your weibo account on koxda.com registration.. after that, it will send a verification e-mail, verify that e-mail and your registerd at koxda..

    ---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
    motherscaper said:
    Hello sir. Im trying to fix my limited service issue by flashing the rom above for my shv160s. will this work on the baseband e160SKSJLL7?
    Click to expand...
    Click to collapse

    if its jellybean then its okay to flash..
    View

New posts