[Q] DUH, rooted otter2 but forgot to copy ROM and GApps first
Ok so I screwed up.
But I should say I'm not a complete newbie at rooting KF and KF2s. I've successfully rooted and put custom ROMs on a number of these devices before. Yes KF2s are harder to root and customize than KFs, I understand that.
Here's what I did.
Checked stock Kindle OS version (10.4.x). Turned on ADB etc before starting.
Rooted as per this page: http://forum.xda-developers.com/show....php?t=2075959
Booted up into Kindle OS.
Connected to PC, ran elevated CMD.
adb push stack /data/local/tmp/
adb shell su -c "dd if=/data/local/tmp/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
adb shell su -c "reboot bootloader" (with fastboot cable attached)
fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin (to install more hack-friendly bootloader)
fastboot -i 0x1949 flash boot otter2-freedom-boot.img
fastboot -i 0x1949 flash recovery otter2-twrp-184.108.40.206-recovery.img
fastboot -i 0x1949 reboot
Ok so here is where I am at. I can boot to TWRP, no problem. I just have no ROM and GApps to flash.
If I do adb devices, it does not give me an error, but lists no devices, I just get 'List of devices attached' with no list of devices.
If I try:
adb push cm-10.1.3-otter2.zip /sdcard/
error: device not found
despite the Android ADB Device being listed correctly in device mangler, and apparently working properly.
I tried to mount the data partition in TWRP, and tried
adb shell mount /sdcard
but still no joy.
So anyone any idea how I can copy the ROM and GApps to the sdcard partition on the KF2 using adb or some other way.
The device won't boot and recovery to factory defaults doesn't work either, I get the boot loop to the red triangle that others have.