[ROM] MiniCM7-2.2.2 [6/7/13] Gingerbread 2.3.7/CM7.2 unofficial port for the x10mini
- Thread starter nobodyAtall
- Start date
1: I just charge mine to the fullest ie. when it says "charged" in the display.
Then reboot into cwm and push "wipe batt. stats" and in that second disconnect the USB cable.
2:Then let the battery drain as low as you dare without the phone turning itself off, plug it in (USB) and get it up to 100% charged again and then redo step 1.
This takes some time as you need to drain the battery as if normal use.
But..
When going home after work this morning I hit DI radio (streaming radio) I still have 75% right now.
07:00 and it is now 17:53 here in Sweden.
My trip home on the train takes 1.5 hours so that is more or less excellent IMO.
I don't know why you think you need to do it twice... If you wipe the stats again, it will just start over, no ?
No, this where the chemistry of the battery plays its roll. The programmed memory of the battery itself is only one side of the lithium technology. The other one is pure and simple chemistry. The lithium technology is in no way static, it has more of a physical state. Let of know he you need more info on the topic. Or just do it and get more battery capacity doing it this way;-)
Ok?
Sent from my X10mini using XDA App
Why not let the phone to turn itself off when batt is depleted? And is it better to do it that way or with batt calibration app? I ask becouse i have a battery drainage problem in 4 hours idle, i've lost 40% off battery. And do i need to do anything else or just batt wipe?
Umm, i did read the faq and led notifications are all unticked, and i did batt calibration with market app of the same name, but not only once, and it was for version 2.0.5, do i need to do that aftrr every update?
Thx
Sent from my X10mini using XDA App
Last edited:
Solution to battery drain minicm7
Download application of market "Battery Calibration"
1 - First we must charge the device at 100%
2 - Open the program give you the option to calibrate the battery
3 - Unplug the charger cable
4 - Allow to drain the battery until the device is fully discharged
5 - After loading the device to 100% again
6 - Use the battery usually last longer than normal,
this is the solution greetings
sorry for my bad English
I appreciate your comments.
Download application of market "Battery Calibration"
1 - First we must charge the device at 100%
2 - Open the program give you the option to calibrate the battery
3 - Unplug the charger cable
4 - Allow to drain the battery until the device is fully discharged
5 - After loading the device to 100% again
6 - Use the battery usually last longer than normal,
this is the solution greetings
sorry for my bad English
I appreciate your comments.
I´ve done both but IMO via CWMrecovery works 100% and the BC app only 90%.
Suggestion
Well for me it worked for me great battery lasts more than 48 hours, Greetings, When is the next update,
Well for me it worked for me great battery lasts more than 48 hours, Greetings, When is the next update,
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
432
Visit Project's page @ google code
MiniCM7 is part of the FreeXperia project
Sources are at my Github: MiniCM nobodyAtall
This ROM is for the X10mini -- NOT the PRO
MiniCM7 is custom-built, based on CyanogenMod 7, running Android Gingerbread on top of the nAa kernel.
Notes:
- The MiniCM7 and OrangeHaze themes are is made exclusively for the MiniCM7 ROMs. They are not to be used with other ROMs, so DON'T rip them
- To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first.
- To everyone: Please don't mirror this ROM
- MiniCM7 is built for X10mini. It is a stable and the most feature-complete Gingerbread ROM perfect for day to day use
- This is a team work by DaRk_dOg and me
- For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting
FAQs (Many thanks to matmutant)
If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
If you want a more relaxed chat, or have issues with MiniCM, you can use the following chat server (Thanks to SafiXS for setting this up!)
MiniCM chat
Before posting an issue wipe (factory reset) via CWM at least once.
Working:
- Everything
Features:
- Built for LDPI
- MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
- App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
- Gingerbread's native App2sd (storing to fat)
- In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
- Modular Undervolting and Overclocking handled CM Settings menu (by default none is active)
- Extra CM Performance Settings menu for SD Read Cache Speed
- Extra CM Settings display menu for Ultra brightness
- Smooth 2D scrolling in menus
- Fake Dual touch in kernel
- Mddi lag fix in kernel
- Native Wifi Hotspot
- Native USB tethering
- Flashlight toggle from lockscreen
- Most of the core components are built from sources
Bugs: (Please use the project's tracker for reporting bugs. Please file them properly following the template or they will be discarded.)
Requirements:
- Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
- Unlocked bootloader
- Latest version of the nAa .29 kernel or nAa .32 kernel
Instructions:- Download the MiniCM7-xxx.zip from the release link that follows
- Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
- Move the MiniCM7-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM7 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
- Unlock your bootloader, if you haven't already. Check http://xdaforums.com/showthread.php?t=1254225 for a nice tutorial
- Flash the nAa kernel using Flashtool. To to this:
- Turn off your phone
- Start the Flashtool\X10FlashTool.exe and select Flash. Then select the E10_nAaxxx kernel firmware (this flashes both the kernel.sin and the loader.sin)
- Keep the back button pressed while connecting the usb cable. Flashtool should detect your phone and flash the kernel.
- Once done, disconnect the usb cable and power on the phone. - Once the logo appears, press the back button repeatedly to enter CWM.
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (RECOMMENDED)
- Flash the MiniCM7-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM7-xxx.zip
- Flash gapps - Reboot (first boot will take ~2 mins)
- Once your device has booted, you can navigate to CM Settings -> System -> Update notifications and select 'Register'. This way you can get update notifications on new versions of MiniCM7!
Downloads: do NOT mirror
MiniCM7-2.2.2
Additional comments:
(NOTE: With the nAa kernel/CWM, multiboot/encryption is NOT yet supported)
- If you would like to multiboot this ROM from the SD card, use the attached MiniCM7-multiboot.zip. Don't flash this normally!!! Instead use the multiboot menu of the CWM recovery to flash it.
- Do NOT report any issues regarding multiboot or encryption on this thread or on the issue tracker. Instead, use the multiboot or the encryption thread.
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
[/CENTER]
Disclaimer:
I can't be held responsible if this ROM bricks your device or makes it explode in your hands! Use it at your own risk!
Changelog:
- 6/7/13 MiniCM7 2.2.2 build
- 10/6/12 MiniCM7 2.2.1 build
- 25/3/12 MiniCM7 2.2.0 build
- 11/2/12 MiniCM7 2.1.9 build
- 28/1/12 MiniCM7 2.1.8 build
- 21/1/12 MiniCM7 2.1.7 build
- 17/12/11 MiniCM7 2.1.6 build
- 26/11/11 MiniCM7 2.1.5 build
- 8/11/11 MiniCM7 2.1.4 build
- 15/10/11 MiniCM7 2.1.3 build
- 5/10/11 MiniCM7 2.1.2 build
- 16/9/11 MiniCM7 2.1.1 build
- 15/9/11 MiniCM7 2.1.0 build
- 28/8/11 MiniCM7 2.0.7 build
- 16/8/11 MiniCM7 2.0.6 build
- 3/8/11 MiniCM7 2.0.5 build
- 31/7/11 MiniCM7 2.0.4 build
- 28/6/11 MiniCM7 2.0.3 build
- 14/6/11 MiniCM7-multiboot.zip
- 8/6/11 MiniCM7 2.0.2 build
- 1/6/11 CWM Recovery
- 25/5/11 MiniCM7 2.0.1 build
- 8/5/11 MiniCM7 2.0.0 build
142MiniCM7 Themes
MiniCM7 themes
MiniCM7 Theme
Inspired by MiniCM6's theme colours
Designed according to official 2.3.3 Gingerbread design guidelines
Build on t-mobile's theme engine (whole theme is an .apk, does not affect system theme)
Code:DISCLAIMER: MiniCM7 theme is an exclusive part of MiniCM7 rom. MiniCM7 rom supports only X10 mini(E10) and X8(E15) for now so every other rom that is "based", or using parts of MiniCM7, should NOT use this theme. The creation/design of this theme is my personal tribute to this rom (and also its trademark), so it would be a great sign of respect if it wasn't distributed with any other rom. D_d
Screens:
------------------------------------------------------------------------------------------
OrangeHaze Theme
Screens:
Each theme's wallpaper can be found under the launcher's "Wallpaper" selection. Search there in case you've changed it and want to rollback.
MiniCM7 theme and OrangeHaze are based in a common template i made so from this version, their changelog is common.
Changelog:
-08-5-2011: MiniCM7 Theme Alpha 1 build
Code:-Initial release
-25-5-2011: MiniCM7 Theme 2.0.1
Code:-Themed Gallery 3D -Themed Music app -Themed Torch -Themed Genie Widget -Themed DeskClock -Themed Launcher -Themed Google Search -Changed widget backplate (different highlight also, more sharpness) -Added more themed application launcher icons -Minor icons optimizations for ldpi
-8-6-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.2
Code:-OrangeHaze theme addition -Themed LatinIME -Darker notification widget background -More themed application launcher icons -Wallpaper integrated to the launcher's selection -Lots of themed additions/optimizations
-28-6-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.3
Code:-Added more launcher icons -Changed transparency in the popup dialogs -Themed Market
-31-7-2011: MiniCM7 Theme / OrangeHaze Theme 2.0.4
Code:-compiled straight from t-mobile's source -Fixed the "device is missing assets" issue (kudos to nobodyAtall for the solution) -semi-transparent notification background (90% opacity) -added several launcher icons
-25-11-2011: MiniCM7 Theme / OrangeHaze Theme 2.1.5
Code:-first common version for X8/X10 mini (still WIP)130Build Changelog:
(Also viewable on your device via: Settings -> CM settings -> System -> View changelog)
For a full list of Cyanogenmod changes check the gerrit:
http://review.cyanogenmod.com/#q,status:merged,n,z
or:
http://cm-nightlies.appspot.com
### MiniCM7-2.2.2
* 2.6.32 nAa kernel support
### MiniCM7-2.2.1
* CM7.2 RC4
### MiniCM7-2.2.0
* CM7.2 RC1
* Small bugfixes
* Improved scrolling performance
* Updated adreno libs
* Media profiles update
* New bootanimation
### MiniCM7-2.1.9
* Improved proximity and light sensors (should solve screen staying black and skype issues)
* a2sd scripts by texasice (http://xdaforums.com/showpost.php?p=21222591&postcount=1374)
* a2sd via CM Settings -> Performance menu
* Blade lockscreen style
* Option to remove all stored Wifi networks by long pressing
* Seperate notifications for MiniCM ROM / nAa kernel
* Fixed Radio FM app RDS allignment
* adb over network
* kernel: 2.6.29.6-nAa-11
### MiniCM7-2.1.8
* Improved 2d/3d performance due to new kgsl drivers
* Configurable centre clock in status bar
* ICS Transition animations
* ICS Rotation animations
* Various CM bugfixes (last sync was yesterday)
* kernel: 2.6.29.6-nAa-10
### MiniCM7-2.1.7
* Suport for X10mini pro (mimmi)
* Various enchancements and fixes from CM
* (CM) T9 dialer for quickly finding contacts
* If no boot animation is selected, the MiniCM7 logo is shown
* kernel: 2.6.29.6-nAa-09
### MiniCM7-2.1.6
* Offline charging
* Show kernel bootlogo if bootanimation is disabled
* Removed modular overclocking since nAa-07 already has overclocked frequencies to choose from
* Option to toggle flashlight from lockscreen (CM Settings -> Lockscreen -> Widgets)
* Fixed OpenGL ES 2.0 version reporting
* MiniCM7 and OrangeHaze theme updates
### MiniCM7-2.1.5
* Based on CM-7.2.0 (RC0)
* Suport for X8 (shakira)
* Focus with camera button while video recording (robyn)
* Disable network lock dialog after pin input (configurable)
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
### MiniCM7-2.1.3
* Based on CM-7.1 release (Android 2.3.7)
* kernel: 2.6.29.6-nAa-05
* USB tethering
* New usb drivers
* Some extra RAM
* Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
* Ant+ support
### MiniCM7-2.1.2
* kernel: 2.6.29.6-nAa-04
* Compcache support (configurable via CM Settings menu)
* Audio recording quality improvement
* Ring lockscreen
* Cherry-picks: Greek dictionary, MIUI-like Battery Bar, Preference to disable bootanimation for faster boot
* Updated Polish translations
* Fixed carrier detection and selection
### MiniCM7-2.1.1
* Reverted Custom carrier label since it broke lockscreen unlocking
### MiniCM7-2.1.0
* kernel: 2.6.29-nAa-02
* Updated wifi/AP modules
* Fixed 'notification bar difficult to pull up' issue
* Fake DT updated to doixahn's 007 (in kernel)
* Major device re-organizing and clean up. Allign with CM/robyn
* Custom carrier label in CM Settings -> Interface -> Status bar tweaks
* Clamp the duration of rotary animations
* Reposition rotary lockscreen for 'drag down to unlock' to work easier
* Camera support for googles and other apps (X8)
* Loop ringtone option via: Settings-> CM Settings -> Sound
* Fixed CWM recovery detection in About -> Phone
### MiniCM7-2.0.7
* CM Setting (input settings) for back button to end current call
* Added Smartass governor (thanks to AnDyX), not enabled by default
* Wpa_supplicant / Wifi from sources
* Rotary doesn't cover caller's name any more
* LED flash via notification bar
* Offline charging for X8
### MiniCM7-2.0.6
* netcfg, libbluedroid from sources
* Improved bluetooth / FM Radio functionality
* liblights from sources (notifications should blink now)
* Replaced Launcher2 with ADWLauncher
* Fixed /data getting filled up with failed download files
* MDPI and several other fixes for X8
### MiniCM7-2.0.5
* Fixed ddms screen capture
* Full camera capabilities (photos / video / AF / Flash) using eclair libcamera (thanks to doixanh)
* Fixed chargemon script for multiboot
* Smoother 2D scrolling
### MiniCM7-2.0.4
* Android version 2.3.5 (GRJ90)
* Removed Launcher pro (you can download latest rev. from market)
* Optimize apks and strip down size
* Updated LiveWallpapers
* Updated CWM recovery to 3.2.0.0-r5 x10mini (multiboot + encryption)
### MiniCM7-2.0.3
* Cyanogenmod 7.1.0-RC1
* Theme updates for various parts
* Radio app improvements
* Fixed Usb debugging notification icon
* backuptool on installation that backs up and restores google propriatery system files
(no need to reflash gapps if it was already installed)
### MiniCM7-2.0.2
* ClockworkMod recovery v.3.2.0.0-r3 for x10mini
* Baseband verification on installation
* Build number: GRJ22 (almost CM7.1) - several changes from Cyanogen
* Many theme updates for MiniCM7 theme, new OrangeHaze theme
* SDcard Cache size changed to 128K to avoid music players hiccups
### MiniCM7-2.0.1
* MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
* Camcoder high quality mode (VGA: 640x480)
* Many Theme updates in numerous system places and applications
* Cyanogenmod now has an option in CM Settings -> Lock screen -> Style options -> Incoming call style
* Undervolting and Overclocking handled CM Settings menu (by default none is active)
* Notification led
* Fixed audio routing in FM Radio app
* APN settings listing
* gralloc reverted to stock (better performance)
* Sensors fixed, working in compat mode
* Compass fixed
* Fixed Magic smoke wallpaper
* Permission Management for apps by Cyanogenmod
* Launcher Pro 0.8.6
### MiniCM7-2.0.0
* Cyanogen7.0.3 - Android 2.3.4 code baseline
* Built for LDPI
* MiniCM7 theme
* GSM/SMS/Data(3G, EDGE)
* Wifi
* FM Radio
* Fixed reboots bug
* Stock audio Recording
* Flash led (Torch app)
* ADB at boot
* Sensors (except proximity and light)
* OpenGL/3D
* Audio Jack
* Video decoder
* Video playback support for 3rd party apps
* Vibration
* GPS
* Bluetooth
* App2sd (storing to ext*. Detect ext3/4 partitions and mount as such)
* Native App2sd
* xRecovery preinstalled
* Usb mass storage
* Audio Mixer
* Camera (VGA)
* Stock SE keyboard
* Offline charging
* Reboot menu - boot into xRecovery
* tun module (vpnc)
* Fake DT support (Thanks to: doixanh, andrej456)
* Overclocking (Thanks to: doixanh)
* Mddi lag fix (Thanks to: doixanh)
* CM Settings performance menu for setting the Sdcard read cache size (speed improvements for sdcard)
* CM Settings performance menu for CPU Overclocking
* CM Settings display menu for Ultra brightness4628Hi folks!
Yet another Saturday release
Changelog for MiniCM7-2.1.9:
### MiniCM7-2.1.9
* Improved proximity and light sensors (should solve screen staying black and skype issues)
* a2sd scripts by texasice (http://xdaforums.com/showpost.php?p=21222591&postcount=1374)
* a2sd via CM Settings -> Performance menu
* Blade lockscreen style
* Option to remove all stored Wifi networks by long pressing
* Seperate notifications for MiniCM ROM / nAa kernel
* Fixed Radio FM app RDS allignment
* adb over network
* kernel: 2.6.29.6-nAa-11
Remember that you MUST flash the nAa-11 kernel. Update notifications are on their way.
Enjoy!
