[Discontinued]

Wootever · Feb 28, 2014

[Discontinued]

Wootever · Feb 28, 2014

Wootever · Feb 28, 2014

gforceriders · Feb 28, 2014

First and can't wait. Will let you know.

Sent from my SM-N9005 using XDA Premium 4 mobile app

themichael · Feb 28, 2014

I can't seem to find it in the OP, is this for AOSP or TW?

guaneet · Feb 28, 2014

Qwallace70129 · Feb 28, 2014

It's in the changelog. Based on N900T NB4 source.

Sent from my SM-N900T using XDA Premium 4 mobile app

teshxx · Feb 28, 2014

Works like a charm. Thanks for the quick release.

deeznutz1977 · Feb 28, 2014

@Wootever .. Damn ur pretty quick only a few hours since i posted in your other thread about source dropping.. Awesome work woot

twoxa · Feb 28, 2014

update works great here! thanks!

ktetreault14 · Mar 1, 2014

Amazing downloading now; D

Sent from my SM-N900T using Tapatalk

vibrantliker · Mar 1, 2014

Any recommended settings? for best battery?

Wootever · Mar 1, 2014

@vibrantliker
my recommended settings (these are also kernel default settings):
CPU: 2265mhz - 300mhz; interactive; 2 (always active cores on touch)
GPU: 450mhz - 200mhz; msm-adreno-tz
Storage: fiops; 512kb (for both)

These settings are optional:
Display: Black level: 1,56% (max); White: FF F0 FF (for a warmer white point)

themichael · Mar 1, 2014

Wootever said:
@vibrantliker
my recommended settings (these are also kernel default settings):
CPU: 2265mhz - 300mhz; interactive; 2 (always active cores on touch)
GPU: 450mhz - 200mhz; msm-adreno-tz
Storage: fiops; 512kb (for both)

These settings are optional:
Display: Black level: 1,56% (max); White: FF F0 FF (for a warmer white point)

What is your basis for screen adjustments? Did you use any tools? Just curious.

Wootever · Mar 1, 2014

@themichael
About the problems with smearing and black crush (and why it can be useful to increase the black level) i would like to quote two explanations:

Slimer777 said:
[...]One thing about the S4 is that the Samsung color profiles will crush everything below 1.5% or someone would call 1.5IRE.

This happens to black level and causes the black crush effect: check here, the first 8 steps are not distinguishable, with the small increase above 1.5% you can almost recognize the first step.

From AndreiLux:

i950X devices have an issue with the AMOLED controller in which, if individial pixels get power-gated for true black, they occur a latency delay when getting powered on again, resulting in a visible smearing effect.

Acts on the black RGB channel filters of the mDNIe engine to elevate pure black to a deep grey. Acts as single control; it acts as a luminosity addend to all greyscale colours in 0.39% steps.

A value of 3 or 4 should be satisfactory to remove the smearing.

Everything else like the white point is only inaccurate measured without proper calibration tools, so this is more or less a personal taste rather than a correct calibration.

vibrantliker · Mar 2, 2014

Wootever said:
@vibrantliker
my recommended settings (these are also kernel default settings):
CPU: 2265mhz - 300mhz; interactive; 2 (always active cores on touch)
GPU: 450mhz - 200mhz; msm-adreno-tz
Storage: fiops; 512kb (for both)

These settings are optional:
Display: Black level: 1,56% (max); White: FF F0 FF (for a warmer white point)

When I flash kernel, these above will set by default?

Otherwise I don't see where to adjust these:

2 (always active cores on touch)
GPU: 450mhz - 200mhz; msm-adreno-tz
Storage: fiops; 512kb (for both)

jpeps · Mar 2, 2014

Link not working

Sent from my SM-N900T using XDA Premium 4 mobile app

axi0m · Mar 3, 2014

jpeps said:
Link not working

Sent from my SM-N900T using XDA Premium 4 mobile app

It worked for me just now.

Sent from my SM-N9005 using Tapatalk

AxAtAx · Mar 3, 2014

Thanks Woot for getting us a working kernel, very important to all us tmo low life's..lol.....without you, this could not be possible....from the Ax....greatly appreciated...for sure...great work!!:good::good::good:

KevG510 · Mar 4, 2014

Installation process and X-Note Compatibility

Hello gentlemen,

I'm definitely excited & THANKFUL to see a kk kernel finally pop up for Tmo but i'm a little uncertain on the process of installing this kernel. What recovery do i need to flash this kernel. I'm currently running the stock rom wit root access knox is at 0x0 but i just got this Note replaced 4 days ago and i dont want CWM to ruin my phone again . I dont care if i trip knox as long as my phone actually works. The 4.3 to 4.4 jump scares me a bit because of the whole update the bootloader thing.

Long story short. i want to get from this factory stock 4.3 rooted rom over to X-Note 11 (requires 4.4.2) and flash this kernel to complete the system
I'm familiar with Odin tools and zip flashing but not with ADB or scripts/commands. I RARELY post for help lol but always do some heavy research before modding any new phone i get. I have been happily flashing and following devs since 2010!

If anyone can help break down this process for me i'd greatly appreciate it.

i asked for help as well in the Xnote 11 Q&A forum ---> http://xdaforums.com/showthread.php?t=2666280&page=15

Actual Rom ---> http://xdaforums.com/showthread.php?t=2472301

[Discontinued]

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Similar threads

Top Liked Posts