And I did.. Anyway I fixed it by reflashing the kernel + reformat sd card + reflash the rom + reflash google apps
And it is working pretty fine
[ROM] MiniCM9-3.0.5 [4/11/12]ICS 4.0.4/CM9.1 for the Χ10 mini pro
- Thread starter nobodyAtall
- Start date
And I did.. Anyway I fixed it by reflashing the kernel + reformat sd card + reflash the rom + reflash google apps
And it is working pretty fine
Might require the setting.apk aswell? I think iit may have required compilation with the ROM so the old setting.apk should work. I've added it to my 3.0.3.zip and I'll tell you the results later
Everything working fine until now!
I copied directly mimmiparts form v.3.0.2 to v.3.0.3 using 7zip.
More fast and smoth!
1 issue found with camera menus in landscape are cutted at left...
One more time great work nAa and Dark_dog!
I copied directly mimmiparts form v.3.0.2 to v.3.0.3 using 7zip.
More fast and smoth!
1 issue found with camera menus in landscape are cutted at left...
One more time great work nAa and Dark_dog!
Last edited:
This happened to me,
the solution was as follows, put the rom and then installed gapps the latest ( here ),
I believe the problem was the version I was installing . :laugh:
I love the new 3.0.3 everything works fine....
wifi in working for me and also no battery drain now :silly:
But the problem still persist since MiniCM9 when i install any app either from market or install via sdcard the phone freezes for a while or sometimes it reboots itself..... Also i face random reboots (once a day)
I am on stock settings no oc, no undervolt, zram 26, surface dithering on, a2sd and no swap(class 4 sdcard)
Overall performance is and user experience is brilliant :cyclops:
wifi in working for me and also no battery drain now :silly:
But the problem still persist since MiniCM9 when i install any app either from market or install via sdcard the phone freezes for a while or sometimes it reboots itself..... Also i face random reboots (once a day)
I am on stock settings no oc, no undervolt, zram 26, surface dithering on, a2sd and no swap(class 4 sdcard)
Overall performance is and user experience is brilliant :cyclops:
Last edited:
No more updates?
Enviado desde mi GT-I9000 usando Tapatalk
camera is working.
Sent from my U20i using xda premium
After first installation of 3.0.3 I had the problem with wifi too, so I did the full wipes again and re-flashed, but still no luck. What eventually helped was formatting system partition in recovery (mounts and storage/format system) and then re-flashing the zip. If you watch the log during flashing you can see that the system settings are backed up and then restored - this could be a reason for that problem I think, CMIIW.
Now I only need to resolve the mimmiparts problem.
Battery seems to be just amazing.
Now I only need to resolve the mimmiparts problem.
Battery seems to be just amazing.
quick question? does the bug still happen that no matter what buttons you press you still cant see the lock screen? that was my problem together with the battery before thats why i went back to minicm7
Power + Home/Back/Menu button to unlock. Battery drain is much better now than the previous version.
MiniCM9 3.0.3 Lockscreen security has no vibration (even if its enabled) and when lockscreen weather & calendar is enabled, the lock wheel is partly off the screen.
we have ldpi phones it will surely cut off screen for small devices.but i think nobdyatall will fix this issue too.
Sent from my U20i using xda premium
I think we will have to wait for v3.0.5 for all measure bug fixed and stable ROM.
Thanks nAa.
Thanks nAa.
How did you get to add the lockscreen shortcuts ?
The slider can only be seen in landscape, and even then it is only half in view.
Notifications still do not vibrate when vibrate mode, [ I guess Override in profile needed ]
Longpressing home on lockscreen does not turn on flashlight.
Sent from my U20i using xda premium
Sent from my U20i using xda premium
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
206
Visit Project's page @ google code
MiniCM9 is an unofficial port of CyanogenMod 9 for the SEMC msm7x27 devices. MiniCM9 is running Android ICS on top of the nAa-ics kernel.
Notes:
- To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first.
- To everyone: Please don't mirror this ROM
- MiniCM9 is built for the X8 / x10mini / x10minipro range. It is quite stable and the most feature-complete ICS ROM, perfect for day to day use
- This is a team work by DaRk_dOg and me
- For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting
FAQs (Many thanks to matmutant)
If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
If you want a more relaxed chat, or have issues with MiniCM, visit the MiniCM chat
(Thanks to thanhhungtn1, SafiXS)
Before posting an issue wipe (factory reset) via CWM at least once.
Features:
- Built for LDPI
- Full hardware acceleration (the ICS way)
- Camera
- Opengl rendering
- MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
- App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
- Android's native App2sd (move to sdcard, storing to fat)
- In kernel ClockworkMod recovery v5.5.0.4 and option to reboot into Recovery
- Modular Undervolting handled Settings -> Performance menu (by default not active)
- KSM support
- Extra Settings display option for Ultra brightness, also handled via notification bar icons
- Smooth 2D scrolling in menus
- Native Wifi Hotspot
- Native USB tethering
- Native Bluetooth tethering
Bugs: (Please use the project's tracker for reporting bugs. Please file them properly following the template or they will be discarded.)
Requirements:
- Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
- Unlocked bootloader
- Latest version of the ICS nAa kernel
Instructions:
- Download the MiniCM9-xxx.zip from the release link that follows
- Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
- Move the MiniCM9-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM9 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
- Make sure you are using the nAa-ics kernel
- Enter CWM and:
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (MUST DO)
- Flash the MiniCM9-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM9-xxx.zip
- Flash gapps in the same way - Reboot (first boot will take ~2 mins)
- Once your device has booted, you can use the nAa notification to register for upcoming updates. This way you can get update notifications on new versions of MiniCM9 and the nAa-ics kernel!
Please make sure you followed the above steps before reporting any issues, especially 'wipe data/factory reset'
Downloads: do NOT mirror
MiniCM9-3.0.5
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
Disclaimer:
I can't be held responsible if this ROM bricks your device or makes it explode in your hands! Use it at your own risk!
Changelog:
- 4/11/12 MiniCM9 3.0.5 build
- 25/7/12 MiniCM9 3.0.4 build
- 5/7/12 MiniCM9 3.0.3 build
- 27/5/12 MiniCM9 3.0.2 build
- 5/5/12 MiniCM9 3.0.1 build
107Build Changelog:
### MiniCM9-3.0.5
* CyanogenMod 9.1 code base
* HW Video encoder/decoder
* YouTube HQ
* Camcorder 640x480
### MiniCM9-3.0.4
CyanogenMod 9 RC2 code base
### MiniCM9-3.0.3
* Sim lock dialog not showing up
* Long-pressing the HOME button toggles flashlight (option in Settings -> Lockscreen -> Security)
* Back button ends current call option in Settings -> Accessibility
* Bugreporting by pressing vol down + vol up + power. Attach this report on bugs that you open on the project's tracker
* Shakira sensors axes mapping corrected
* A2SD settings
* Swap settings
* Dhcpd from sources
* Partition info Settings menu
* Option to disable bootanimation for faster boot
* MiniCM9 aroma-based installer (for robyn and shakira)
* Notification bar icon for app switching
* Faster app startup
### MiniCM9-3.0.2
* MiniCM9 theme - to be used only with the MiniCM9 ROM
* Kernel bootlogo animation now finishes before MiniCM9 boot animation starts
* Autobrightness levels fixed
* Recovery version in Settings -> About Phone
* Updates for camerahal
* camera: barcode scanners fix
* camcoder: 352x288 resolution
(higher resolution is possible but has audio/video sync issues due to missing codecs)
* FM Radio app now enables bluetooth when it starts
* SmartassV2 governor as default
* Many fixes from CM: theme manager, lockscreen icons, Apollo, etc.
* Fixed reboot hanging issues (when rebooting from power button)
* Fixed some A2SD issues
### MiniCM9-3.0.1
* Functional Camera (SEMC libcamera, camcorder not working)
* Many fixes from CM
* libcopybit (shakira)
* Fixed banding issues
* Bluetooth a2dp
* Ultra brightness setting is now persistent on boot
* Sim and timezone fixes are included
* Fixed power draining issues
* Kernel update
* MimmiParts.apk, thanks to: madbulls
### MiniCM9-3.0.0
* CM9 - Android 4.0.4 code baseline
* Full Hardware Acceleration with Adreno ICS libs
* For use with nAa-ics kernel line only
* Built for MDPI - shakira, LDPI - robyn, mimmi
* MiniCM9 theme
* GSM/SMS/Data(3G, EDGE)
* Wifi
* Wifi Tethering
* Usb mass storage
* Usb tethering
* Bluetooth
* Bluetooth Tethering
* FM Radio
* Flash led (Torch app)
* ADB at boot
* Sensors
* OpenGL Rendering for gui
* Libaudio from sources
* Software Video decoder
* Vibration
* GPS
* App2sd (storing to ext4. Detect ext4 partition and swap and usingmount as such)
* Native android moving apps to sdcard
* Flash led (Torch app) (for robyn, mimmi)
* Stock SE T9 keyboard (for robyn, mimmi)
* Offline charging
* Reboot menu - boot into Recovery
* Gallery, Browser, Live Wallpapers and Gmail are fully working
* OTA Update notifications for both kernel and ROM
* Network stats via Settings -> Data usage
* Undervolting via Settings -> Performance menu
* Ultra brightness via Settings -> Display menu86Performance
MiniCM9 along with the nAa-ics kernel, includes some interesting performance improvement points:
- System -> Performance -> Processor -> CPU governor and frequency --> SmartassV2 is suggested. Overclocking can be set as higher as your device can take
- System -> Performance -> Processor -> Undervolting --> Enable this to get better battery life
- System -> Performance -> Memory management -> zRam (Compcache) --> By default this is set to 18% in order to provide more physical memory (RAM)
- System -> Performance -> Kernel samepage merging -> Enable this to get smaller memory footprint due to memory sharing among apps (Note that this might increase battery consumption)
85Components
### Built from sources
* libaudio
* libgralloc
* hwcomposer
* libsensors
* liblight
* fm Radio
* camerahal
* libcamera
* bluetooth
### Done
* Camcorder
* HW Video encoder / decoder42Hello pro community
MiniCM9-3.0.1 is released today for the x10mini pro.
This is a team effort so you should be thanking everybody: Implementation-wise D_d is making the visuals and preparing the MiniCM9 theme that will be included in upcoming versions. Testing and support-wise matmutant is doing an excellent work. Specifically for the pro, many thanks to leajian and siddardha21 for their device-specific testing and suggestions.
Note that CM9 is still very young and there are still a lot of bugs to be fixed and features to be implemented. Please only contribute positively to the discussion, try to find fixes / workarounds if you can and suggest them to the rest of the users. As always I'm open to patches and suggestions.
Enjoy you camera with ICS
