@geko95gek coulld you provide me with your config Script? Pm'd you but guess your Mailbox is overflowing
Hi, tried flash batista twice but stucked on 'Samsung GT9100'. I'm from Litening Rom. Do fullwipe (factory/data,cache&dalvik wipe),in CWM flash Batista...still stuck in Samsung boot.screen. Pls help..really like this.rom. Tq.
Give it a few minutes..If you see the notifications lights at the bottom lit up then wait. If say after five ten minutes it does not work just reboot the phone and it should be fine.
@gowind try this go to settings > display > and start both calibrate (gyro and horizontal)
Sent from my GT-I9100 using xda premium
So sorry,forgot to mention i,m from Litening Rom & flash to ICS 4.0.3 but got many bugs. Then i tried flash to Batista in CWM...stuck in Samsung boot msg. Still use method that u mention above?
So sorry,forgot to mention i,m from Litening Rom & flash to ICS 4.0.3 but got many bugs. Then i tried flash to Batista in CWM...stuck in Samsung boot msg. Still use method that u mention above?
Hi geko95gek,Sorry mate, just scanned all my recent PMs and sadly I didin't receive anything from you. No worries anyways, I'm sending my config right now.
Hi geko95gek,
I desperately need your help. I configured the phone as per your instructions and it worked for a day and today the battery went flat so I changed the battery as I always carry spare batteries, but now the phone would not even switch on. It looks like it is bricked. I have tried all ways to switch the phone by the three botton option but no joy.
Can you help?
You might need to flash the old bootloader first before installing Foxhound.
How to install old bootloader? Can i done it by flashing stock rom (any gingerbread ver)with odin? Thanks...+1
Hi geko95gek,
I desperately need your help. I configured the phone as per your instructions and it worked for a day and today the battery went flat so I changed the battery as I always carry spare batteries, but now the phone would not even switch on. It looks like it is bricked. I have tried all ways to switch the phone by the three botton option but no joy.
Can you help?
I have tried what you suggested but no joy. The phone is dead, any other ideas how to revive it once again.I had this problem once,searched net for 3 hours,my solution was holding all 3 buttons for entering download mode and then insert battery while holding them using my mouth.
Then the phone switched on in download
mode
Sent from my GT-I9100 using Tapatalk
Hi geko95gek,
I desperately need your help. I configured the phone as per your instructions and it worked for a day and today the battery went flat so I changed the battery as I always carry spare batteries, but now the phone would not even switch on. It looks like it is bricked. I have tried all ways to switch the phone by the three botton option but no joy.
Can you help?
The ROM is zippy and the theme is fine. But the transparency in the TouchWiz calendar widget is really messed up. Can you upload the original green and white one?
In Fox 3.0, I went and adjusted the rows on the display from 4 to 5 which was a great feature to add apps.
However, when I went to resize my widgets, it wouldn't work. It moved the grid down, but nothing resized. It works to make it smaller but not bigger. Anyone else found this to happen.
Is my only solution to use Go Launcher which worked well when I was on VRv3.0 Rom.
Any other opinions about using Go Launcher with this Fox 3.0 Rom? Is there a quick way within fox3.0 to add features to the power off menu. i.e. boot into recovery, airport mode etc...
Not having any issues using Go Launcher here.
You can use JKay deluxe settings app to change stuff like options in power menu or to customize the status bar.
Communicated using an SGS2 droid with XDA premium neurotransmitter while DJ'ing on the Death Star.
NOTE: Now FoxHound has only ONE (1) install file.
1. Boot into recovery mode
2. Format System / Factory Data Wipe
3. Wipe cache and also wipe dalvik cache
4. Install the zip file and you will get the CWM install completed message.
5. Select Reboot Now and let the phone boot up to an Android setup screen.
6. Setup the phone as requested
7. Reboot the phone into recovery mode again and wipe cache and dalvik cache again
8. Reboot phone and everything should be working...
9.Now if you want install extra package
For old FoxHound ROM
1. Boot into recovery mode
2. Format System / Factory Data Wipe
3. Wipe cache and also wipe dalvik cache
4. Install Part 1 until you get the CWM install completed message.
5. Select Reboot Now and let the phone boot up and you should get to an Android setup screen.
Don't use advanced CWM mode or reboot into recovery
6. Setup the phone as requested and then reboot the phone into recovery mode again
7. Wipe cache and dalvik cache again
8. Install Part 2
9. Reboot phone and everything should be working...
10. If you get any error msgs, try removing your external SD card and start again.[/COLOR]
4) After the installation select the "reboot system now"
Performance Settings for FOXHOUND ROMTeam Member FoxHound Factory Extended
Me Developer Rom
ToxicOne Themer Rom
ApriliaM3 Big Member Team