[Guide/ Pictorial /Video ] How to solve Security error/Flash Stock TOT file LG E970
- Thread starter ShoaibAhmed
- Start date
Error: We can't communicate with phone
Following the instructions, I get an error at 85% that says this:
"Process: Upgrade_Masterbin
SubProc: Masterbin Download
Cause: We can't communicate with Phone"
Is this a driver issue? I started from a fresh install of Windows 7 64bit and did not plug in the phone until after running the install.bat script. It's bricked right now.
Here's everything I've done since getting this phone (stock) in chronological order:
-Rooted using the instructions here: http://xdaforums.com/showthread.php?t=2006946
-Attempted to unlock the bootloader using that same guide, following the "more laborious/error prone/manual way" instructions. This bricked the phone. It gets stuck at the LG logo. Can't get to fastboot/recovery. Only download mode.
-I followed the instructions on this thread and ran into the problem described at the top of this post.
Following the instructions, I get an error at 85% that says this:
"Process: Upgrade_Masterbin
SubProc: Masterbin Download
Cause: We can't communicate with Phone"
Is this a driver issue? I started from a fresh install of Windows 7 64bit and did not plug in the phone until after running the install.bat script. It's bricked right now.
Here's everything I've done since getting this phone (stock) in chronological order:
-Rooted using the instructions here: http://xdaforums.com/showthread.php?t=2006946
-Attempted to unlock the bootloader using that same guide, following the "more laborious/error prone/manual way" instructions. This bricked the phone. It gets stuck at the LG logo. Can't get to fastboot/recovery. Only download mode.
-I followed the instructions on this thread and ran into the problem described at the top of this post.
I have a problem in Select .bin File
Hello, I have a problem.
When I click right side of bin and select bin file and click start, appear an error message.
Say that LGNPST_COMPON version is 5.0.1.0 At least above 5.0.3.0.
Somebody can help me?
Thanks
Hello, I have a problem.
When I click right side of bin and select bin file and click start, appear an error message.
Say that LGNPST_COMPON version is 5.0.1.0 At least above 5.0.3.0.
Somebody can help me?
Thanks
Someone upload the rom in mega pls
e970 .tot file :- http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip i hope it will help .
---------- Post added at 10:56 PM ---------- Previous post was at 10:54 PM ----------
My lg e970 is hard bricked and i need adb dump/backup to revive that . if someone can provide that it will be of great help . the procedure to create adb backup is mentioned below. i hope some noble soul will help me smile
step 1: root your device.
step 2: go to setting > about > software info > build info > tap 5-6 times until message getting to enable developer mode.
step 3: go to setting > developer option > usb debugging >Turn ON
step 4: open your PC and run adb t from cmd.exe
step 5: run this command then check your mobile screen for grant su permission.
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/Alive_Dump.bin bs=1024 count=1048576
step 6: AFTER THAT create 1GB dump in your phone internal main storage.
find name “Alive_Dump.bin”
note : command are case sensitive so try to direct copy paste better for no error.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
20Hi Guys , Just before 26 hrs i got security error on my LG Optimus G E970 and I don't know How to solve it. I searched alot and i didn't find proper Guide. So i think i should make one for other people.
This is descriptive Guide and cover almost every single part and Download links.
(For tools and firmware I don't own it , i just searched it on web/XDA so credits goes to Devs )
Download link LGNPST automated (credits goes to Dev) : http://bit.ly/14hPMxn
Firmware thread link : http://xdaforums.com/showthread.php?t=2219953
Video :
now first you need to download firmware from site
Extract Zip and you will get TOT File
rename it to Bin
Now Download LGNPST automated Zip and Extaract it
After Extracting Run Install.bat as administrator
After completeing installation press enter
Now open Directory where LGNPST is installed
It is in LG electronics folder
for 32 bit system users go to programe files/ LG electronics
for 64 bit system users go to programe files(X86)/ LG electronics
Now open LGNPST in LGNPST folder
Connect your phone in USB by pressing and holding both Vol + and - key
It will connect to Download MOD
As you connect your phone drivers are started to be installed
After drivers are installed you will be able to see your device
Now click right side of DLL file files and select LS970.DLL
Now click right side of bin and select bin file which we renamed
Now click start and it warned you that this process will erase your data
click ok
Flashing will start and at 67-85 % it will flash firmware
if your device is booted then you can unplugg your device If not than you have to keep it plugged up to 100%
PART 2 :
Credits :
@g33k3r
@adfurgerson
@whoamanwtf
And all other who helped me one way or other3Great work, I have this bookmarked for future referral. It should be stickied in my opinion.2
Thanks . Actually i didn't find any guide explaining properly so i thought i should make one.1This is from my experience:
I just went thru the procedures and after download show at 85% my phone auto reboot and some how it got stuck at the blue AT&T logo. I was waiting for another 15 minutes but no changed. At this point I'm a little panic thinking I have brick the phone. So I went to google and do some searching. This is what came up.
If you got stuck at the reboot , power off and FACTORY RESET THE PHONE (in my case I'm holding the volume down button and Power Button.
After a while phone boot up normal into its OS.
I'm a happy man now
:laugh:
New posts
-
-
[OFFICIAL] LineageOS 21 for the Razer Phone 2- Latest: unsponsoredgeek
-
