[Q] One X stuck on logo with other firmwares

Search This thread

MarianG

Senior Member
Jun 11, 2009
52
2
40
Cologne
Hello,
I've got this model and is very strange;
before I receive it other one made a format via twrp to the system and all the other data.
The phone now goes only in fastboot and in custom recvery.
I flashed a lot of different firmwares but the phone don't power on.
Stays only in HTC Logo.
The only firmware that is working with it is this: cm-10.1.3-endeavoru.zip
The details for this phone in fastboot are this:
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.18.401.1
(bootloader) serialno: HT**********
(bootloader) imei: 35918**********
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4017mV
(bootloader) devpower: 89
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0

I've searched firmware by it's original CID but I didn't found.
Any idea to fix it because I don't wanna let it with cm10.
Thanks!
 

teamomivida

Member
Apr 21, 2013
33
6
Hello,
I've got this model and is very strange;
before I receive it other one made a format via twrp to the system and all the other data.
The phone now goes only in fastboot and in custom recvery.
I flashed a lot of different firmwares but the phone don't power on.
Stays only in HTC Logo.
The only firmware that is working with it is this: cm-10.1.3-endeavoru.zip
The details for this phone in fastboot are this:
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.18.401.1
(bootloader) serialno: HT**********
(bootloader) imei: 35918**********
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4017mV
(bootloader) devpower: 89
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0

I've searched firmware by it's original CID but I didn't found.
Any idea to fix it because I don't wanna let it with cm10.
Thanks!
Try flashing this recovery
 
  • Like
Reactions: MarianG

Mr Hofs

Senior Member
Sep 10, 2011
19,126
14,575
You have to flash the boot.img via fastboot ! I think you are booting different roms with the CM kernel, hence the bootloop/stuck at logo.

Different rom = flash boot.img, full wipe in recovery, install rom......

Only flash the above recovery if you are planning to install a kitkat rom. If you want to flash any other rom i suggest philz 5.15

https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
 
Last edited:
  • Like
Reactions: MarianG

MarianG

Senior Member
Jun 11, 2009
52
2
40
Cologne
You have to flash the boot.img via fastboot ! I think you are booting different roms with the CM kernel, hence the bootloop/stuck at logo.

Different rom = flash boot.img, full wipe in recovery, install rom....

Sorry but I don't understand something: what boot file do I have to write via fastboot?
I'm already using philz_touch_5.15.9-endeavoru.img and I don't wanna install kitkat rom.
So I have to extract the "boot.img" from my custom recovery that I have and flash it via fastboot or what?
Thanks!
 

Mr Hofs

Senior Member
Sep 10, 2011
19,126
14,575
Yes via fastboot, fastboot flash boot boot.img

With that i mean the boot.img from the rom.zip ofcourse ....
 
  • Like
Reactions: MarianG

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hello,
    I've got this model and is very strange;
    before I receive it other one made a format via twrp to the system and all the other data.
    The phone now goes only in fastboot and in custom recvery.
    I flashed a lot of different firmwares but the phone don't power on.
    Stays only in HTC Logo.
    The only firmware that is working with it is this: cm-10.1.3-endeavoru.zip
    The details for this phone in fastboot are this:
    Code:
    (bootloader) version: 0.5a
    (bootloader) version-bootloader: 1.39.0000
    (bootloader) version-baseband: 5.1204.162.29
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 3.18.401.1
    (bootloader) serialno: HT**********
    (bootloader) imei: 35918**********
    (bootloader) product: endeavoru
    (bootloader) platform: HBOOT-T30S
    (bootloader) modelid: PJ4610000
    (bootloader) cidnum: HTC__Y13
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4017mV
    (bootloader) devpower: 89
    (bootloader) partition-layout: None
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    (bootloader) commitno-bootloader: None
    (bootloader) hbootpreupdate: 2
    (bootloader) gencheckpt: 0

    I've searched firmware by it's original CID but I didn't found.
    Any idea to fix it because I don't wanna let it with cm10.
    Thanks!
    Try flashing this recovery
    1
    You have to flash the boot.img via fastboot ! I think you are booting different roms with the CM kernel, hence the bootloop/stuck at logo.

    Different rom = flash boot.img, full wipe in recovery, install rom......

    Only flash the above recovery if you are planning to install a kitkat rom. If you want to flash any other rom i suggest philz 5.15

    https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
    1
    Yes via fastboot, fastboot flash boot boot.img

    With that i mean the boot.img from the rom.zip ofcourse ....