[ROM][P990][KK/4.4.4][New/Old BL][July 13/June 13]CyanogenMod 11.0
- Thread starter lukino993
- Start date
I'm currently testing the latest M1, and really, It turns on in the phone but no devices can see it.
Sent from my LG-V500 using XDA Premium app
I'm currently testing the latest M1, and really, It turns on in the phone but no devices can see it.
Sent from my LG-V500 using XDA Premium app
+1. I used all CM11 M1 versions and never had wifi tethering working.
After 3 years with this little buddy it's time I get a new phone the moto g.
I want to thank everybody who helped us all this time and learned us so many things about android.
Pengus
Tonyp
Carburano (djangomanouche rom)
Spyrosk
Etc
And everyone else [emoji106]
I will always keep an eye around.
Take care guys.[emoji6]
Sent by Moto g
I want to thank everybody who helped us all this time and learned us so many things about android.
Pengus
Tonyp
Carburano (djangomanouche rom)
Spyrosk
Etc
And everyone else [emoji106]
I will always keep an eye around.
Take care guys.[emoji6]
Sent by Moto g
Radio Broken??
I can't seem to get my radio working, my phone wont connect to T-Mobile who is my service provider. Is there any steps I should take or whats up with that? I am currently using the latest bcm4329 build. Also is it better to use the bcm4329 or bcmhd (I don't understand the difference, someone explain it to me)? Is the battery meter normally not working and the phone always displaying 999% or is that just for me? I would like to recommend that when you dim the screen that the notification/menu buttons dim as well.
I can't seem to get my radio working, my phone wont connect to T-Mobile who is my service provider. Is there any steps I should take or whats up with that? I am currently using the latest bcm4329 build. Also is it better to use the bcm4329 or bcmhd (I don't understand the difference, someone explain it to me)? Is the battery meter normally not working and the phone always displaying 999% or is that just for me? I would like to recommend that when you dim the screen that the notification/menu buttons dim as well.
Last edited:
Wifi tethering was reported by some to work in the cm-11-20141024-UNOFFICIAL-p990.3.1.zip build, but not to be working in the latest build. No password security as of yet, though.
I think I read that the trick was to activate wifi tethering and then reboot the phone if it didn't initially work.
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
29CyanogenMod 11 for P990(Optimus 2x)
Disclaimer:
Code:[B]Everything mentioned in this thread belong to their respective developers/owners. You will be doing everything at your own risk. We nor the developers cannot be held responsible if you end up damaging or bricking your device.[/B]
Notes
First and foremost: I am not the person behind CM11 releases,some days ago @tonyp said that he wanted that someone update his thread,so i offer myself. As of right now, there are several devs building CM11 for this phone. This leads to more builds and more builds to test. The best you can do is to test for yourself and see what suits your needs. All is based on tonyp's source because he can't momentarily build himself. The build in this thread can be used with two kernels :
-3.1 alpha 27 kernel by @pengus77(included in 27 may build),or 3.1 kernel fork by @Firtecy(built in with bcmhd driver)
-2.6.39.4 kernel by @pengus77 to use with 01/06/2014 build by @BS86 based on @tonyp sources(built in with bcm4329 driver)
Please respect the devs and their effort put into this. If you have questions, ask politely, if you find unknown bugs, please report with logs . Please don't asking for an ETA,when all is ready our devs will share with us
Github Links
Tonyp
Firtecy
Hjunii
AIO Toolkit (i.e. repartition your phone for preferred bootloader layout):here
Installation Instructions
Beware: This is for new bootloader!!!
Reboot into recovery (preferably TWRP 2.6.0.0 by tonyp or by @hjunii(thanks to @trocopassu for made it flashable)
Wipe data/factory reset
Wipe dalvik cache
Flash ROM
Reboot
Downloads
Tonyp's Basketbuild:
Tonyp's Basketbuild CM11 folder
BS86's Basketbuild:
BS86's Basketbuild CM11 folder
SUDDEN36 11/06/2014 BUILD
OLDBL Version
What Works
Working:
Phone
Messaging
WiFi
3G
Torch
Sound
SD cards
Bluetooth pairing + file transfer
GPS (got a cold fix after 30 secs with 9 satellites. Warm fix took < 10 seconds)
USB file transfer to SD card
USB tethering
Bugs
-Usual CM10.2 bugs
-Upside down camera (kernel problem so don't ask because isn't rom fault,solved if you use the M1 kernel )
-QuickMemo app isn't compatible
-Bluetooth Calls
-Wifi Tethering
-HDMI not working
Bugs in bcm4329
-Screen off - flash
-No 0-percent battery level shutdown
-no traffic indicators
-wifi tethering only working after full wipe when changing ROM-compatibility
-HDMI not working18I've updated and pushed my sources to the newest stable snapshot, so you can hopefully expect a new build based on M7 soon.
M7 changed: http://www.cyanogenmod.org/blog/cyanogenmod-11-0-m7-released
Note that it's still 4.4.2, CM will merge 4.4.3. in their next release.
I've decided to remove the included Performance Control and just ship the prebuild Performance Control instead, I think that might be the best solution for now as the enforced 1000 Mhz limit while booting is something that should be kept in my opinion to prevent problems for certain people.
While I think most of your tips are reasonable this particular build.prop edit doesn't work any more since GB ages :laugh:
Are people having lots of problems with launcher redraws? Then I can reinclude my old CM10.2 hack to increase it's running priority.14Changelogs / Q&A / Credits
Changelog
20140713/20140716 (compiled by @BS86)
Q&ACode:BCMDHD & BCM4329: resynced to CM11 M8 Android 4.4.4 reverted transparent status bar added tonyp's memory management-optimizations set default zRAM-size to 110MB instead of 60MB removed torch app (buildbreaker)
Are Gapps included or i should download it?
Gapps are already included,because tony made a slim gapps package included in his sources.
Can you please add this and that feature?
The builds you find here are with clean CM11 sources. That is what you can expect. Requests may be welcome, but do not expect it to be bloated with a ton of features.
How can i install oldbl version?
You should use cwm6.0.3.1 available directly from clockworkmod to flash it - twrp is apparently not usable!
Credits
- CyanogenMod
- @pengus77
- @hjunii
- @tonyp for his sources and all his work for this phone .
- @DJNoXD
- @Firtecy
- @BS86
- @natalya for help me to write the OP
- @sudden36 for 20140611 build8
Me neither.Oh well, I don't feel like making 10 useless posts, so I'll just upload the zip from syslog here. Now to find some threads that I might be able to contrubute to!
So the problem is that my SIM card disconnects so that I have to enter my PIN again. I can see some errors in the log file, but I've no idea how to interpret them
Actually what's happening to you is the result of a bug fix I committed quite some time ago. Before that fix your signal would have shown as connected even if it wasn't anymore. It happens for a handful of people, but thanks to the "fix" you at least get the pin request and don't think that you still have signal.
The reason is a sim crash, but I don't know what's causing it or how to fix it.
P.S.: yes, I'm subscribed to this thread (and a trillion others), so don't worry.
Enviado desde mi Nexus 5 mediante Tapatalk7CM 11 speed up
So I was facing extreme slowdown on CM11 & Firtecy 3.1.10 Kernel (32 MB RH), everywhere in the ROM, using dialer, apps, lockscreen, camera etc.
To speed up, this is what I did:
1. (Using Titanium Backup or Rom Toolbox) Froze unused apps like Cell broadcast, Clock (use timely instead), Email, Exchange Services, File Manager (Use Es File Explorer), Voice+, VPN dialogue, Whisper push. This frees up some RAM.
2. Use Performance Control app 2.1.19 from this thread http://xdaforums.com/showthread.php?t=2444376.
The one included in settings is unusable for now. Its settings get reverted after each reboot.
Make following changes in each tab
a) Set CPU max frequency to 1200.
b) Set multicore power saving to 'On'. Also accesible in Kowalski manager.
c) Fast charge - depends on you. Also accesible in Kowalski manager.
d) Minfree taskkiller presets - Agressive. You can also check here if Zram is active. Leave it at 18%.
e) Voltage - leave it unchanged. Undervolting hardly gives you powersaving, but stability might become an issue.
f) SD read ahead to 1024 kb. Also accesible in Kowalski manager.
Also here go to VM settings, and set
dirty_background_ratio=15
dirty_ratio=30
swappiness=30
(I remember these settings from @tonyp post in Cm10.1 thread. He can further advise if we need to fine tune these settings for CM11)
Do enable "Set on boot" for each setting page changed. Restart and you have responsive phone.
Screenshots attached for reference. Enjoy CM11
P.S. Memory Minfree settings can be further finetuned. Hence waiting for Tony's inputs.