[SIGNUP] [DEVELOPMENT] signup sheet for aosp build team

Search This thread
By:
Advanced…
B

bithunter_99

Member
Dec 7, 2012
46
14
oh... thats n1ce..
Sound, Graphics, WLAN and 3G is all i need...
i'll hope, that you can get everything to work.
But it's fine to hear, CM11 is booting on p52xx
 
M

moonbutt74

Guest
@Restl3ss - just a hunch, if it's the same hang up i had at the beginning. apt-get install yasm

@ketut.kumajaya the only dlopen message is this:
W/InterfaceController( 1878): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library

@Angel_666 - did you run into the stpcpy error with busybox when building ? if so how did you resolve it?

my build [current with 4.4 kernel] gets to bootanimation and hangs. here is logcat. and logcat with only E/ messages.

m
 

Attachments

  • logcat.txt
    318.8 KB · Views: 3
  • logcat-E.txt
    315.1 KB · Views: 1
Last edited:
Hazou

Hazou

Senior Member
Feb 5, 2012
1,644
2,216
moonbutt74 said:
@Restl3ss - just a hunch, if it's the same hang up i had at the beginning. apt-get install yasm

@ketut.kumajaya the only dlopen message is this:
W/InterfaceController( 1878): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library

@Angel_666 - did you run into the stpcpy error with busybox when building ? if so how did you resolve it?

my build [current with 4.4 kernel] gets to bootanimation and hangs. here is logcat.

m
Click to expand...
Click to collapse

For the busybox, use those fixes:

http://review.cyanogenmod.org/70770
http://review.cyanogenmod.org/70789

I have uploaded them for review. Maybe they will het merged with official code.

Verstuurd van mijn GT-P5110
 
  • Like
Reactions: Angel_666 and woopdedoda
M

moonbutt74

Guest
Hazou said:
For the busybox, use those fixes:

http://review.cyanogenmod.org/70770
http://review.cyanogenmod.org/70789

I have uploaded them for review. Maybe they will het merged with official code.

Verstuurd van mijn GT-P5110
Click to expand...
Click to collapse

hazou,

thanks, i was getting stressed out, while my sloppy fix seemed to be working for the 4.2 [modified] kernel, i think it might be the reason
my /data doesn't seem to create right with the 4.4 kernel [new]
will get a new build going !

m
@Hazou running mka recoveryimage now, will update

---------- Post added at 01:32 PM ---------- Previous post was at 12:41 PM ----------
Angel_666 said:
@ketut.kumajaya Found a little problem in new kitkat 4.4.4 CM image: i can't read kernel messages (dmesg) coz "klogctl: operation not permitted". I check CONFIG_SECURITY_DMESG_RESTRICT in kernel config, but it's disabled as it must be. Where else can i turn off this protection? And another thing: android shell don't have superuser priveleges even if we type "SU". Any help?
Click to expand...
Click to collapse

I'm not sure how helpful this is but i was only able to get root permissions for logcat etc after swapping the init binary from the old 4.2 [modified]
kernel/boot.img to replace the one from the new 4.4 kernel/boot.img so my guess is selinux maybe? [policy,file contexts, and some weirdness with the updater script].

m
 
Last edited:
K

ketut.kumajaya

Recognized Developer
Apr 28, 2011
4,935
14,138
Bekasi
@moonbutt74
Ignore the dlopen failed: library "/system/lib/libnetcmdiface.so" not found error for now, please try "echo 2 > /data/.layout_version" and reboot.

EDIT: I need "ps" and "lsmod" output.
 
Angel_666

Angel_666

Senior Member
Mar 18, 2009
317
856
PS output:
Code: 
USER     PID   PPID  VSIZE  RSS     WCHAN    PC         NAME
root      1     0     956    624   c1137687 08062a46 S /init
root      2     0     0      0     c105d3e4 00000000 S kthreadd
root      3     2     0      0     c10451d5 00000000 S ksoftirqd/0
root      4     2     0      0     c1057fc9 00000000 S kworker/0:0
root      5     2     0      0     c1057fc9 00000000 S kworker/u:0
root      6     2     0      0     c109de3c 00000000 S migration/0
root      7     2     0      0     c10a933a 00000000 S watchdog/0
root      8     2     0      0     c109de3c 00000000 S migration/1
root      9     2     0      0     c1057fc9 00000000 S kworker/1:0
root      10    2     0      0     c10451d5 00000000 S ksoftirqd/1
root      11    2     0      0     c1057fc9 00000000 S kworker/0:1
root      12    2     0      0     c10a933a 00000000 S watchdog/1
root      13    2     0      0     c109de3c 00000000 S migration/2
root      14    2     0      0     c1057fc9 00000000 S kworker/2:0
root      15    2     0      0     c10451d5 00000000 S ksoftirqd/2
root      16    2     0      0     c10a933a 00000000 S watchdog/2
root      17    2     0      0     c109de3c 00000000 S migration/3
root      18    2     0      0     c1057fc9 00000000 S kworker/3:0
root      19    2     0      0     c10451d5 00000000 S ksoftirqd/3
root      20    2     0      0     c10a933a 00000000 S watchdog/3
root      21    2     0      0     c1057e2e 00000000 S cpuset
root      22    2     0      0     c1057e2e 00000000 S khelper
root      23    2     0      0     c1057fc9 00000000 S kworker/u:1
root      372   2     0      0     c10fc737 00000000 S sync_supers
root      374   2     0      0     c10fd25a 00000000 S bdi-default
root      376   2     0      0     c1057e2e 00000000 S kblockd
root      389   2     0      0     c1057e2e 00000000 S ata_sff
root      400   2     0      0     c1390501 00000000 S khubd
root      410   2     0      0     c1057e2e 00000000 S md
root      486   2     0      0     c1057fc9 00000000 S kworker/1:1
root      487   2     0      0     c1057e2e 00000000 S cfg80211
root      588   2     0      0     c146e965 00000000 S cfinteractive
root      599   2     0      0     c1057e2e 00000000 S msic_adc
root      601   2     0      0     c10aa6ac 00000000 S irq/16-msic_adc
root      602   2     0      0     c1057fc9 00000000 S kworker/u:2
root      605   2     0      0     c1435f32 00000000 S ia_watchdog
root      639   2     0      0     c1057e2e 00000000 S clt-vbus
root      654   2     0      0     c1057fc9 00000000 S kworker/2:1
root      657   2     0      0     c1057fc9 00000000 S kworker/2:2
root      660   2     0      0     c10a8ab8 00000000 S khungtaskd
root      666   2     0      0     c10f4aaa 00000000 S kswapd0
root      717   2     0      0     c115e1c7 00000000 S fsnotify_mark
root      738   2     0      0     c11f35a2 00000000 S ecryptfs-kthrea
root      745   2     0      0     c1057e2e 00000000 S crypto
root      759   2     0      0     c1057e2e 00000000 S kthrotld
root      823   2     0      0     c10aa6ac 00000000 S irq/5-fw_loggin
root      850   2     0      0     c1057e2e 00000000 S 0000:00:00.2
root      852   2     0      0     c1057e2e 00000000 S 0000:00:02.4
root      876   2     0      0     c10aa6ac 00000000 S irq/307-host_no
root      879   2     0      0     c1057e2e 00000000 S penwell_otg_que
root      880   2     0      0     c1057e2e 00000000 S penwell_otg_chr
root      897   2     0      0     c1057e2e 00000000 S kpsmoused
root      923   2     0      0     c1057fc9 00000000 S kworker/u:3
root      932   2     0      0     c10aa6ac 00000000 S irq/318-mxt1188
root      956   2     0      0     c10aa6ac 00000000 S irq/345-max7769
root      973   2     0      0     c1057fc9 00000000 S kworker/3:1
root      990   2     0      0     c1057e2e 00000000 S sii9234_msc_wq
root      991   2     0      0     c10aa6ac 00000000 S irq/269-sii9234
root      1004  2     0      0     c10aa6ac 00000000 S irq/36-msic_vdd
root      1021  2     0      0     c1485007 00000000 S mmcqd/0
root      1022  2     0      0     c1485007 00000000 S mmcqd/0boot0
root      1023  2     0      0     c1485007 00000000 S mmcqd/0boot1
root      1024  2     0      0     c1485007 00000000 S mmcqd/0rpmb
root      1025  2     0      0     c1485007 00000000 S mmcqd/0gp0
root      1122  2     0      0     c1057e2e 00000000 S binder
root      1130  2     0      0     c14c6937 00000000 S kcompcached
root      1131  2     0      0     c1057e2e 00000000 S sep_sec-ewq
root      1157  2     0      0     c1057e2e 00000000 S bh1730fvc_wq
root      1165  2     0      0     c10aa6ac 00000000 S irq/276-asp01
root      1169  2     0      0     c10aa6ac 00000000 S irq/350-fuelgau
root      1170  2     0      0     c1057fc9 00000000 S kworker/0:2
root      1172  2     0      0     c1057e2e 00000000 S max77693-charge
root      1181  2     0      0     c1057e2e 00000000 S sst_mad_wq
root      1182  2     0      0     c1057e2e 00000000 S sst_post_msg_wq
root      1184  2     0      0     c1057e2e 00000000 S sst_process_msg
root      1185  2     0      0     c1057e2e 00000000 S sst_proces_repl
root      1187  2     0      0     c10aa6ac 00000000 S irq/30-intel_ss
root      1200  2     0      0     c16464b8 00000000 S krfcommd
root      1204  2     0      0     c1057e2e 00000000 S hsi_cmd_h_wq
root      1205  2     0      0     c1057e2e 00000000 S hsi_ipc_wq
root      1206  2     0      0     c1057e2e 00000000 S hsi_m_raw_h_wq
root      1207  2     0      0     c1057e2e 00000000 S hsi_rfs_wq
root      1208  2     0      0     c1057e2e 00000000 S hsi_extra_wq
root      1233  2     0      0     c1057e2e 00000000 S deferwq
root      1248  2     0      0     c1057e2e 00000000 S mtp_read_send
root      1253  2     0      0     c13ca505 00000000 S file-storage
root      1269  2     0      0     c1057e2e 00000000 S sec-battery
root      1280  2     0      0     c10aa6ac 00000000 S irq/349-battery
root      1284  2     0      0     c10aa6ac 00000000 S irq/67-msic_pow
root      1292  2     0      0     c1057e2e 00000000 S sec_jack_wq
root      1312  2     0      0     c1057fc9 00000000 S kworker/3:2
root      1315  1     848    260   c1137687 08062a46 S /sbin/ueventd
root      1330  2     0      0     c1057e2e 00000000 S ttm_swap
root      1381  2     0      0     f04866c1 00000000 S dsi_esd
root      1385  2     0      0     c1057e2e 00000000 S HDCP_WQ
root      1393  2     0      0     c10aa6ac 00000000 S irq/299-Clovert
root      1892  2     0      0     c1057e2e 00000000 S pvr_timer
root      1894  2     0      0     c1057e2e 00000000 S pvr_sync_workqu
root      1903  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p13
root      1904  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1907  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p8-
root      1908  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1911  2     0      0     c114b82b 00000000 S flush-179:0
root      1913  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p6-
root      1914  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1918  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p2-
root      1919  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1923  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p3-
root      1924  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1929  2     0      0     c11caca6 00000000 S jbd2/mmcblk0p9-
root      1930  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1931  1     1632   264   c1162280 0805ff9b S /sbin/healthd
system    1932  1     1468   204   c14c3dc3 b76d4516 S /system/bin/servicemanage
r
root      1933  1     43484  8932  ffffffff b76c52d1 S /system/bin/vold
root      1937  1     11212  1276  ffffffff b76212d1 S /system/bin/netd
root      1938  1     1660   516   c154118a b76688c3 S /system/bin/debuggerd
system    1940  1     50548  20436 ffffffff b76b600b S /system/bin/surfaceflinge
r
root      1941  1     717960 47372 ffffffff b76e4700 S zygote
drm       1942  1     21364  5696  ffffffff b7579516 S /system/bin/drmserver
install   1944  1     2588   488   ffffffff b76c8269 S /system/bin/installd
keystore  1945  1     4888   1388  c14c3dc3 b764f516 S /system/bin/keystore
system    1946  1     3532   464   ffffffff b76ae8c3 S /system/bin/ddexe
system    1947  1     4632   944   ffffffff b7653700 S /system/bin/connfwexe
compass   1948  1     3480   464   ffffffff b7650269 S /system/bin/orientationd
compass   1949  1     1468   460   c13e5308 b76980d6 S /system/bin/geomagneticd
gps       1950  1     17240  3404  ffffffff b7161700 S /system/bin/gpsd
system    1951  1     19260  3856  ffffffff b76b9516 S /system/bin/bintvoutservi
ce
shell     1958  1     4812   272   ffffffff 080678b0 S /sbin/adbd
root      1964  2     0      0     c1057e2e 00000000 S pvr_workqueue
graphics  2096  1     248596 229152 ffffffff b76a4516 S /system/bin/bootanimatio
n
root      2135  2     0      0     c1057fc9 00000000 S kworker/1:2
system    2314  1941  761180 40064 ffffffff b76e6269 S system_server
radio     2486  1     19120  4372  ffffffff b77542d1 S /system/bin/rild
shell     2520  1958  1556   688   c10026b1 b76a86a6 S /system/bin/sh
shell     2532  2520  1876   512   00000000 b76e60d6 R ps

Lsmod output:

Code: 
videobuf_vmalloc 3466 0 - Live 0x00000000
videobuf_core 13472 1 videobuf_vmalloc, Live 0x00000000
hdmi_audio 16188 0 - Live 0x00000000 (C)
pvrsgx 303176 2 - Live 0x00000000 (C)
pnwdisp 440914 18 hdmi_audio,pvrsgx, Live 0x00000000 (C)
 
M

moonbutt74

Guest
lsmod and ps

ketut.kumajaya said:
@moonbutt74
Ignore the dlopen failed: library "/system/lib/libnetcmdiface.so" not found error for now, please try "echo 2 > /data/.layout_version" and reboot.

EDIT: I need "ps" and "lsmod" output.
Click to expand...
Click to collapse

lsmod and ps

Code: 
root@kali:~# adb shell
shell@santos10wifi:/ $ lsmod
videobuf_vmalloc 4349 0 - Live 0x00000000
videobuf_core 17198 1 videobuf_vmalloc, Live 0x00000000
hdmi_audio 18167 0 - Live 0x00000000 (C)
pvrsgx 318123 2 - Live 0x00000000 (C)
pnwdisp 488911 17 hdmi_audio,pvrsgx, Live 0x00000000 (C)
shell@santos10wifi:/ $ ps
USER     PID   PPID  VSIZE  RSS     WCHAN    PC         NAME
root      1     0     1076   796   c11376b7 08062a46 S /init
root      2     0     0      0     c105d3e4 00000000 S kthreadd
root      3     2     0      0     c10451d5 00000000 S ksoftirqd/0
root      4     2     0      0     c1057fc9 00000000 S kworker/0:0
root      5     2     0      0     c1057fc9 00000000 S kworker/u:0
root      6     2     0      0     c109de6c 00000000 S migration/0
root      7     2     0      0     c10a936a 00000000 S watchdog/0
root      8     2     0      0     c109de6c 00000000 S migration/1
root      9     2     0      0     c1057fc9 00000000 S kworker/1:0
root      10    2     0      0     c10451d5 00000000 S ksoftirqd/1
root      11    2     0      0     c1057fc9 00000000 S kworker/0:1
root      12    2     0      0     c10a936a 00000000 S watchdog/1
root      13    2     0      0     c109de6c 00000000 S migration/2
root      14    2     0      0     c1057fc9 00000000 S kworker/2:0
root      15    2     0      0     c10451d5 00000000 S ksoftirqd/2
root      16    2     0      0     c10a936a 00000000 S watchdog/2
root      17    2     0      0     c109de6c 00000000 S migration/3
root      18    2     0      0     c1057fc9 00000000 S kworker/3:0
root      19    2     0      0     c10451d5 00000000 S ksoftirqd/3
root      20    2     0      0     c10a936a 00000000 S watchdog/3
root      21    2     0      0     c1057e2e 00000000 S cpuset
root      22    2     0      0     c1057e2e 00000000 S khelper
root      23    2     0      0     c1057fc9 00000000 S kworker/u:1
root      371   2     0      0     c10fc767 00000000 S sync_supers
root      373   2     0      0     c10fd28a 00000000 S bdi-default
root      375   2     0      0     c1057e2e 00000000 S kblockd
root      388   2     0      0     c1057e2e 00000000 S ata_sff
root      399   2     0      0     c1390531 00000000 S khubd
root      409   2     0      0     c1057e2e 00000000 S md
root      414   2     0      0     c1057fc9 00000000 S kworker/1:1
root      487   2     0      0     c1057e2e 00000000 S cfg80211
root      587   2     0      0     c146e995 00000000 S cfinteractive
root      598   2     0      0     c1057e2e 00000000 S msic_adc
root      600   2     0      0     c10aa6dc 00000000 S irq/16-msic_adc
root      601   2     0      0     c1057fc9 00000000 S kworker/u:2
root      604   2     0      0     c1435f62 00000000 S ia_watchdog
root      638   2     0      0     c1057e2e 00000000 S clt-vbus
root      653   2     0      0     c1057fc9 00000000 S kworker/2:1
root      656   2     0      0     c1057fc9 00000000 S kworker/2:2
root      659   2     0      0     c10a8ae8 00000000 S khungtaskd
root      665   2     0      0     c10f4ada 00000000 S kswapd0
root      717   2     0      0     c115e1f7 00000000 S fsnotify_mark
root      738   2     0      0     c11f35d2 00000000 S ecryptfs-kthrea
root      745   2     0      0     c1057e2e 00000000 S crypto
root      759   2     0      0     c1057e2e 00000000 S kthrotld
root      823   2     0      0     c10aa6dc 00000000 S irq/5-fw_loggin
root      850   2     0      0     c1057e2e 00000000 S 0000:00:00.2
root      852   2     0      0     c1057e2e 00000000 S 0000:00:02.4
root      874   2     0      0     c10aa6dc 00000000 S irq/307-host_no
root      876   2     0      0     c1057fc9 00000000 S kworker/3:1
root      878   2     0      0     c1057e2e 00000000 S penwell_otg_que
root      879   2     0      0     c1057e2e 00000000 S penwell_otg_chr
root      896   2     0      0     c1057e2e 00000000 S kpsmoused
root      930   2     0      0     c10aa6dc 00000000 S irq/318-mxt1188
root      954   2     0      0     c10aa6dc 00000000 S irq/345-max7769
root      984   2     0      0     c1057e2e 00000000 S sii9234_msc_wq
root      985   2     0      0     c10aa6dc 00000000 S irq/269-sii9234
root      998   2     0      0     c10aa6dc 00000000 S irq/36-msic_vdd
root      1015  2     0      0     c1485037 00000000 S mmcqd/0
root      1016  2     0      0     c1485037 00000000 S mmcqd/0boot0
root      1017  2     0      0     c1485037 00000000 S mmcqd/0boot1
root      1018  2     0      0     c1485037 00000000 S mmcqd/0rpmb
root      1019  2     0      0     c1485037 00000000 S mmcqd/0gp0
root      1114  2     0      0     c1057fc9 00000000 S kworker/u:3
root      1117  2     0      0     c1057e2e 00000000 S binder
root      1123  2     0      0     c1057e2e 00000000 S sep_sec-ewq
root      1127  2     0      0     c14c6967 00000000 S kcompcached
root      1152  2     0      0     c1057e2e 00000000 S bh1730fvc_wq
root      1160  2     0      0     c10aa6dc 00000000 S irq/350-fuelgau
root      1162  2     0      0     c1485037 00000000 S mmcqd/1
root      1167  2     0      0     c1057e2e 00000000 S max77693-charge
root      1168  2     0      0     c1057fc9 00000000 S kworker/3:2
root      1177  2     0      0     c1057e2e 00000000 S sst_mad_wq
root      1178  2     0      0     c1057e2e 00000000 S sst_post_msg_wq
root      1179  2     0      0     c1057e2e 00000000 S sst_process_msg
root      1180  2     0      0     c1057e2e 00000000 S sst_proces_repl
root      1186  2     0      0     c10aa6dc 00000000 S irq/30-intel_ss
root      1196  2     0      0     c16464e8 00000000 S krfcommd
root      1203  2     0      0     c1057e2e 00000000 S deferwq
root      1218  2     0      0     c1057e2e 00000000 S mtp_read_send
root      1223  2     0      0     c13ca535 00000000 S file-storage
root      1239  2     0      0     c1057e2e 00000000 S sec-battery
root      1250  2     0      0     c10aa6dc 00000000 S irq/349-battery
root      1254  2     0      0     c10aa6dc 00000000 S irq/67-msic_pow
root      1262  2     0      0     c1057e2e 00000000 S sec_jack_wq
root      1283  2     0      0     c1057fc9 00000000 S kworker/0:2
root      1284  2     0      0     c1057fc9 00000000 S kworker/u:4
root      1287  1     916    260   c11376b7 08062a46 S /sbin/ueventd
root      1289  2     0      0     c1057fc9 00000000 S kworker/1:2
root      1343  2     0      0     c1057e2e 00000000 S ttm_swap
root      1393  2     0      0     f03066c1 00000000 S dsi_esd
root      1397  2     0      0     c1057e2e 00000000 S HDCP_WQ
root      1406  2     0      0     c10aa6dc 00000000 S irq/299-Clovert
root      1845  2     0      0     c1057e2e 00000000 S pvr_timer
root      1846  2     0      0     c1057e2e 00000000 S pvr_sync_workqu
root      1855  2     0      0     c11cacd6 00000000 S jbd2/mmcblk0p13
root      1856  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1859  2     0      0     c11cacd6 00000000 S jbd2/mmcblk0p8-
root      1860  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1863  2     0      0     c114b85b 00000000 S flush-179:0
root      1865  2     0      0     c11cacd6 00000000 S jbd2/mmcblk0p6-
root      1866  2     0      0     c1057e2e 00000000 S ext4-dio-unwrit
root      1870  1     1632   264   c11622b0 0805ff9b S /sbin/healthd
system    1871  1     1468   204   c14c3df3 b7666516 S /system/bin/servicemanager
system    1873  1     464    8     c1052a2b 0804b717 S /system/bin/rtccdx
root      1880  1     1700   632   c1041cbc b770094b S /system/bin/debuggerd
system    1881  1     46720  16620 ffffffff b765500b S /system/bin/surfaceflinger
drm       1883  1     18924  4764  c10502eb b752827b t /system/bin/drmserver
root      1887  2     0      0     c109e81e 00000000 S kauditd
compass   1889  1     3480   464   ffffffff b7722269 S /system/bin/orientationd
compass   1891  1     1468   460   c13e5338 b771c0d6 S /system/bin/geomagneticd
system    1895  1     4632   968   ffffffff b7650700 S /system/bin/connfwexe
root      1914  1     1200   4     c15411ba 080e27e3 S /system/xbin/su
shell     1915  1     4812   248   ffffffff 080678b0 S /sbin/adbd
root      1932  2     0      0     c1057e2e 00000000 S pvr_workqueue
root      2081  1880  1608   624   c15ddb53 b76a90d6 S dumpstate
graphics  2087  1     248592 229104 ffffffff b7670516 S /system/bin/bootanimation
system    2114  1     3532   460   ffffffff b77478c3 S /system/bin/ddexe
root      2189  2     0      0     c114b85b 00000000 S flush-252:0
root      2431  2     0      0     c1057fc9 00000000 S kworker/2:3
shell     2843  1915  1556   688   c10026b1 b76e36a6 S /system/bin/sh
shell     4270  2843  1876   508   00000000 b76640d6 R ps
shell@santos10wifi:/ $

on echo 2 > /data/.layout_version returns
/system/bin/sh: can't create /data/.layout_version: Permission denied

can this be done in recovery and what exactly am i doing? creating a file or just reading what's there ?

okay i answered my own question, /data is not creating at all.
@Hazou - the patches seem to be good.
 
Last edited:
Angel_666

Angel_666

Senior Member
Mar 18, 2009
317
856
moonbutt74 said:
l
on echo 2 > /data/.layout_version returns
/system/bin/sh: can't create /data/.layout_version: Permission denied

okay i answered my own question, /data is not creating at all.
@Hazou - the patches seem to be good.
Click to expand...
Click to collapse

i think our problem is the same. Try to create file in any dir and permissions will be denied. Coz shell can't work as root i think.
 
K

ketut.kumajaya

Recognized Developer
Apr 28, 2011
4,935
14,138
Bekasi
@Angel_666, @moonbutt74
Why /system/vendor/bin/pvrsrvctl service from init.common.rc not started? Please try start it manually using "start pvrsrvctl" or directly using "/system/vendor/bin/pvrsrvctl --no-module --start" command.

Make sure /data included in ramdisk, check why /data partition not mounted.
 
Last edited:
  • Like
Reactions: Angel_666
Angel_666

Angel_666

Senior Member
Mar 18, 2009
317
856
ketut.kumajaya said:
@Angel_666, @moonbutt74
Why /system/vendor/bin/pvrsrvctl service from init.common.rc not started? Please try start it manually using "start pvrsrvctl" or directly using "/system/vendor/bin/pvrsrvctl --no-module --start" command.
Click to expand...
Click to collapse
Code: 
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 11
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 12                                                                                                                           
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 13                                                                                                                           
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 13                                                                                                                           
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 13                                                                                                                           
E/IMGSRV  ( 2109): :0: PVRDRMOpen: TP3, ret = 15                                                                                                                           
E/IMGSRV  ( 1941): :0: PVRDRMOpen: TP3, ret = 33

Errors in logcat...
 
M

moonbutt74

Guest
output
shell@santos10wifi:/ $ /system/vendor/bin/pvrsrvctl --no-module --start
/system/vendor/bin/pvrsrvctl: SrvInit failed (already initialized?) (err=PVRSRV_ERROR_SRV_CONNECT_FAILED)
1|shell@santos10wifi:/ $


from init.common.rc

service pvrsrvctl /system/vendor/bin/pvrsrvctl --no-module --start
class core
oneshot
user root

something missing ?

directory creation in init.rc only correct?

from init.rc:

Code: 
# setup the global environment
..etc
export ANDROID_DATA /data
..etc

# Create cgroup mount point for memory
..etc
mkdir /data 0771 system system
..etc
Code: 
on post-fs-data
    # We chown/chmod /data again so because mount is run as root + defaults
    chown system system /data
    chmod 0771 /data
    # We restorecon /data in case the userdata partition has been reset.
    restorecon /data

    # Avoid predictable entropy pool. Carry over entropy from previous boot.
    copy /data/system/entropy.dat /dev/urandom

    # Create dump dir and collect dumps.
    # Do this before we mount cache so eventually we can use cache for
    # storing dumps on platforms which do not have a dedicated dump partition.
    mkdir /data/dontpanic 0750 root log

    # Collect apanic data, free resources and re-arm trigger
    copy /proc/apanic_console /data/dontpanic/apanic_console
    chown root log /data/dontpanic/apanic_console
    chmod 0640 /data/dontpanic/apanic_console

    copy /proc/apanic_threads /data/dontpanic/apanic_threads
    chown root log /data/dontpanic/apanic_threads
    chmod 0640 /data/dontpanic/apanic_threads

    write /proc/apanic_console 1

    # create basic filesystem structure
    mkdir /data/misc 01771 system misc
    mkdir /data/misc/adb 02750 system shell
    mkdir /data/misc/audit 02750 audit system
    mkdir /data/misc/bluedroid 0770 bluetooth net_bt_stack
    mkdir /data/misc/bluetooth 0770 system system
    mkdir /data/misc/keystore 0700 keystore keystore
    mkdir /data/misc/keychain 0771 system system
    mkdir /data/misc/radio 0770 system radio
    mkdir /data/misc/sms 0770 system radio
    mkdir /data/misc/zoneinfo 0775 system system
    mkdir /data/misc/vpn 0770 system vpn
    mkdir /data/misc/systemkeys 0700 system system
    mkdir /data/misc/wifi 0770 wifi wifi
    mkdir /data/misc/wifi/sockets 0770 wifi wifi
    mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi
    mkdir /data/misc/dhcp 0770 dhcp dhcp
    # give system access to wpa_supplicant.conf for backup and restore
    chmod 0660 /data/misc/wifi/wpa_supplicant.conf
    mkdir /data/local 0751 root root
    mkdir /data/misc/media 0700 media media

    # For security reasons, /data/local/tmp should always be empty.
    # Do not place files or directories in /data/local/tmp
    mkdir /data/local/tmp 0771 shell shell
    mkdir /data/data 0771 system system
    mkdir /data/app-private 0771 system system
    mkdir /data/app-asec 0700 root root
    mkdir /data/app-lib 0771 system system
    mkdir /data/app 0771 system system
    mkdir /data/property 0700 root root
    mkdir /data/ssh 0750 root shell
    mkdir /data/ssh/empty 0700 root root
    mkdir /data/radio 0770 radio radio

    # create dalvik-cache and double-check the perms, so as to enforce our permissions
    mkdir /data/dalvik-cache 0771 system system
    chown system system /data/dalvik-cache
    chmod 0771 /data/dalvik-cache

    # create resource-cache and double-check the perms
    mkdir /data/resource-cache 0771 system system
    chown system system /data/resource-cache
    chmod 0771 /data/resource-cache

    # create the lost+found directories, so as to enforce our permissions
    mkdir /data/lost+found 0770 root root

    # create directory for DRM plug-ins - give drm the read/write access to
    # the following directory.
    mkdir /data/drm 0770 drm drm

    # create directory for MediaDrm plug-ins - give drm the read/write access to
    # the following directory.
    mkdir /data/mediadrm 0770 mediadrm mediadrm

    # symlink to bugreport storage location
    symlink /data/data/com.android.shell/files/bugreports /data/bugreports

    # Separate location for storing security policy files on data
    mkdir /data/security 0711 system system

    # Reload policy from /data/security if present.
    setprop selinux.reload_policy 1

    # Set SELinux security contexts on upgrade or policy update.
    restorecon_recursive /data
service keystore /system/bin/keystore /data/misc/keystore
class main
user keystore
group keystore drmrpc system

from logcat:
E/hwcomposer( 1879): int hwc_eventControl(hwc_composer_device_1*, int, int, int): unsupported event 1
@ketut.kumajaya - i have the bootanimation, i break with no /data meaning only /data/media is present @Angel_666 - are you getting to animation or logo hang ?
 
Last edited:
Angel_666

Angel_666

Senior Member
Mar 18, 2009
317
856
moonbutt74 said:
output
shell@santos10wifi:/ $ /system/vendor/bin/pvrsrvctl --no-module --start
/system/vendor/bin/pvrsrvctl: SrvInit failed (already initialized?) (err=PVRSRV_ERROR_SRV_CONNECT_FAILED)
1|shell@santos10wifi:/ $


from init.common.rc

service pvrsrvctl /system/vendor/bin/pvrsrvctl --no-module --start
class core
oneshot
user root

something missing ?

directory creation in init.rc only correct?

from init.rc:

Code: 
# setup the global environment
..etc
export ANDROID_DATA /data
..etc

# Create cgroup mount point for memory
..etc
mkdir /data 0771 system system
..etc
Code: 
on post-fs-data
    # We chown/chmod /data again so because mount is run as root + defaults
    chown system system /data
    chmod 0771 /data
    # We restorecon /data in case the userdata partition has been reset.
    restorecon /data

    # Avoid predictable entropy pool. Carry over entropy from previous boot.
    copy /data/system/entropy.dat /dev/urandom

    # Create dump dir and collect dumps.
    # Do this before we mount cache so eventually we can use cache for
    # storing dumps on platforms which do not have a dedicated dump partition.
    mkdir /data/dontpanic 0750 root log

    # Collect apanic data, free resources and re-arm trigger
    copy /proc/apanic_console /data/dontpanic/apanic_console
    chown root log /data/dontpanic/apanic_console
    chmod 0640 /data/dontpanic/apanic_console

    copy /proc/apanic_threads /data/dontpanic/apanic_threads
    chown root log /data/dontpanic/apanic_threads
    chmod 0640 /data/dontpanic/apanic_threads

    write /proc/apanic_console 1

    # create basic filesystem structure
    mkdir /data/misc 01771 system misc
    mkdir /data/misc/adb 02750 system shell
    mkdir /data/misc/audit 02750 audit system
    mkdir /data/misc/bluedroid 0770 bluetooth net_bt_stack
    mkdir /data/misc/bluetooth 0770 system system
    mkdir /data/misc/keystore 0700 keystore keystore
    mkdir /data/misc/keychain 0771 system system
    mkdir /data/misc/radio 0770 system radio
    mkdir /data/misc/sms 0770 system radio
    mkdir /data/misc/zoneinfo 0775 system system
    mkdir /data/misc/vpn 0770 system vpn
    mkdir /data/misc/systemkeys 0700 system system
    mkdir /data/misc/wifi 0770 wifi wifi
    mkdir /data/misc/wifi/sockets 0770 wifi wifi
    mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi
    mkdir /data/misc/dhcp 0770 dhcp dhcp
    # give system access to wpa_supplicant.conf for backup and restore
    chmod 0660 /data/misc/wifi/wpa_supplicant.conf
    mkdir /data/local 0751 root root
    mkdir /data/misc/media 0700 media media

    # For security reasons, /data/local/tmp should always be empty.
    # Do not place files or directories in /data/local/tmp
    mkdir /data/local/tmp 0771 shell shell
    mkdir /data/data 0771 system system
    mkdir /data/app-private 0771 system system
    mkdir /data/app-asec 0700 root root
    mkdir /data/app-lib 0771 system system
    mkdir /data/app 0771 system system
    mkdir /data/property 0700 root root
    mkdir /data/ssh 0750 root shell
    mkdir /data/ssh/empty 0700 root root
    mkdir /data/radio 0770 radio radio

    # create dalvik-cache and double-check the perms, so as to enforce our permissions
    mkdir /data/dalvik-cache 0771 system system
    chown system system /data/dalvik-cache
    chmod 0771 /data/dalvik-cache

    # create resource-cache and double-check the perms
    mkdir /data/resource-cache 0771 system system
    chown system system /data/resource-cache
    chmod 0771 /data/resource-cache

    # create the lost+found directories, so as to enforce our permissions
    mkdir /data/lost+found 0770 root root

    # create directory for DRM plug-ins - give drm the read/write access to
    # the following directory.
    mkdir /data/drm 0770 drm drm

    # create directory for MediaDrm plug-ins - give drm the read/write access to
    # the following directory.
    mkdir /data/mediadrm 0770 mediadrm mediadrm

    # symlink to bugreport storage location
    symlink /data/data/com.android.shell/files/bugreports /data/bugreports

    # Separate location for storing security policy files on data
    mkdir /data/security 0711 system system

    # Reload policy from /data/security if present.
    setprop selinux.reload_policy 1

    # Set SELinux security contexts on upgrade or policy update.
    restorecon_recursive /data
service keystore /system/bin/keystore /data/misc/keystore
class main
user keystore
group keystore drmrpc system

from logcat:
E/hwcomposer( 1879): int hwc_eventControl(hwc_composer_device_1*, int, int, int): unsupported event 1
@ketut.kumajaya - i have the bootanimation, i break with no /data meaning only /data/media is present @Angel_666 - are you getting to animation or logo hang ?
Click to expand...
Click to collapse

Boot animation cycling. HWcomposer error was present in 4.2.2 CM too, but it's works anyway.
 
M

moonbutt74

Guest
Angel_666 said:
Boot animation cycling. HWcomposer error was present in 4.2.2 CM too, but it's works anyway.
Click to expand...
Click to collapse

angel,

your previous build of cm11 booted through with sgx and the 4.2 kernel with selinux enabled.
same with mine.
i say it's in the 4.4 kernel source /drivers/staging/intel_media/bld/clovertrail/
i have a build running right now and after thats done, i'm taking a chainsaw to the kernel source . :silly:
should be fun. :good:

m
 
Restl3ss

Restl3ss

Senior Member
Aug 3, 2013
633
1,078
Fort Mcmurray
moonbutt74 said:
@Restl3ss - just a hunch, if it's the same hang up i had at the beginning. apt-get install yasm

@ketut.kumajaya the only dlopen message is this:
W/InterfaceController( 1878): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library

@Angel_666 - did you run into the stpcpy error with busybox when building ? if so how did you resolve it?

my build [current with 4.4 kernel] gets to bootanimation and hangs. here is logcat. and logcat with only E/ messages.

m
Click to expand...
Click to collapse


Nope, yasm didn't do it.

My source is pretty dirty right now so i'm thinking i'm gonna clear it all and resync.

on the service you mentioned, you said it was already initialized, did you try killing it and restarting?
 
M

moonbutt74

Guest
Restl3ss said:
Nope, yasm didn't do it.

My source is pretty dirty right now so i'm thinking i'm gonna clear it all and resync.

on the service you mentioned, you said it was already initialized, did you try killing it and restarting?
Click to expand...
Click to collapse

that never occured to me,.... :silly: duh, okay let me try that. :laugh:
i know i hit that error somewhere, i'll walk backwards and try to find it. :confused:
running a build, listening to thunder.

m

it's header file, but theres a procedure to mod/patch it involving locating the pre-generated header then finding it's actual location changing the reference then running a python script to update the change jn the build system.

are you doing integrated kernel build? if so, don't for now. if you hit it again after resync then post a larger chunk
of the log, no rule to make is probably something missing in/from an android.mk
my wifi keeps cutting out with storm, so i'll be out for a bit.
 
Last edited:
Restl3ss

Restl3ss

Senior Member
Aug 3, 2013
633
1,078
Fort Mcmurray
moonbutt74 said:
that never occured to me,.... :silly: duh, okay let me try that. :laugh:
i know i hit that error somewhere, i'll walk backwards and try to find it. :confused:
running a build, listening to thunder.

m

it's header file, but theres a procedure to mod/patch it involving locating the pre-generated header then finding it's actual location changing the reference then running a python script to update the change jn the build system.

are you doing integrated kernel build? if so, don't for now. if you hit it again after resync then post a larger chunk
of the log, no rule to make is probably something missing in/from an android.mk
my wifi keeps cutting out with storm, so i'll be out for a bit.
Click to expand...
Click to collapse

I am, yeah. Resync is almost done, gonna build soon. Will keep posted

See you on the flip side
 
M

moonbutt74

Guest
okay so

hwc - hardware composer i believe is the issue [i believe alot of things, don't make 'em true ! :silly: ]

E/hwcomposer( 1890): int hwc_eventControl(hwc_composer_device_1*, int, int, int): unsupported event 1
I/ServiceManager( 1890): Waiting for service display.intel.mds...
mds = multidisplay

this happened when i began adding to harware_intel specifically hardware/intel/clovertrail/hwc/
i believe hwc_composer_device relates to - IntelHWComposer.cpp - maybe.
will try to trim out the hwc portion but if i am looking at it right the rest has to stay for audio [latin for to hear]
bluetooth [latin for why does my audio keep cutting out :p ] and wifi.

will hold off on the chainsaw for now but, must build again which takes about 7 hours....YAY !!!!

m
 
Angel_666

Angel_666

Senior Member
Mar 18, 2009
317
856
moonbutt74 said:
okay so

hwc - hardware composer i believe is the issue [i believe alot of things, don't make 'em true ! :silly: ]

E/hwcomposer( 1890): int hwc_eventControl(hwc_composer_device_1*, int, int, int): unsupported event 1
I/ServiceManager( 1890): Waiting for service display.intel.mds...
mds = multidisplay

this happened when i began adding to harware_intel specifically hardware/intel/clovertrail/hwc/
i believe hwc_composer_device relates to - IntelHWComposer.cpp - maybe.
will try to trim out the hwc portion but if i am looking at it right the rest has to stay for audio [latin for to hear]
bluetooth [latin for why does my audio keep cutting out :p ] and wifi.

will hold off on the chainsaw for now but, must build again which takes about 7 hours....YAY !!!!

m
Click to expand...
Click to collapse

Mds service is not critical error. As for hwc - use prebuilded version, cos in Intel sources hwc is completly broken and need to fix. Problem is that mediaserver dying - we need to check why.
 
Hazou

Hazou

Senior Member
Feb 5, 2012
1,644
2,216
Angel_666 said:
Mds service is not critical error. As for hwc - use prebuilded version, cos in Intel sources hwc is completly broken and need to fix. Problem is that mediaserver dying - we need to check why.
Click to expand...
Click to collapse

Y, always use prebuilt verions when trying a new android version, especially when they are ready for use. When it all works, try the source code if u want to change somethings.

For the mediaserver. I had the exact same problem in cm10.1 and it all came down to sound. in my case just remove the prebuilt sound files and use general audio. U won't have any audio, but it will boot i hope.
 
You must log in or register to reply here.

Similar threads

Unjustified Dev
  • Poll
Galaxy Tab 3 7in CM-10.1/Cm-10.2 development[SM-T210/T210R]
Replies
320
Views
98K
huey45
huey45
tgalal
Inception-Auto-Root for Galaxy Tab 3 Lite SM-T113
Replies
51
Views
159K
Serhatibin
Serhatibin
Unjustified Dev
Galaxy Tab 3 7in Cm-10.2 + development[SM-T215/T217]
Replies
46
Views
25K
M
majorkid
interloper
  • Locked
Some stuff for the lt02ltespr
Replies
632
Views
83K
LenAsh
LenAsh
R
[DEVELOPMENT]TAB310.1-Run a Linux distro natively
Replies
118
Views
19K
Mighty
Mighty

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 16
    N
    nels83
    Uploaded cm-12.1-20150421-UNOFFICIAL-p5210.zip (sources are updated on github as usual)

    New in this version:
    - Audio! (basic for now, no bluetooth audio support)

    Happy flashing ;)
    View
    15
    Restl3ss
    Restl3ss
    The vast majority of us seem to want CM11, myself included. So, If you're decently capable, let me know! I fully understand @Angel_666 's frustration, namely why he's waiting to see tw kitkat - being a lone dev probably sucks, and trying to make a 4.4 port based on 4.2.2 x86 things with incomplete sources is insanely difficult. Let's change that. Stop being a part of the "gimme gimme" crowd, come do something about it!

    For to-be Developers:
    You're expected to have at least a basic understanding of Linux (command line). If you don't possess such an understanding, you're in way over your head, as even the advanced experience a kryptonite effect with the intel clovertrail platform. Basic understanding doesn't necessarily mean you need to know every single piece of a kernel. Just know your basic commands (such as cd, mkdir, etc). There are people, including myself, willing to teach you how to compile from source as long as you have this foundation. NOTE; If you only meet the VERY basic criteria, you will be required to do a cm11 build before being added to this list. Meaning, have someone walk you through it, or follow this guide for D2LTE. (you can replace d2lte with a device you have) If you get a feel for it, welcome to the team.
    the exception to this rule is if you have valuable experience which, though might not be android perse, is definitely wanted.

    For Testers:
    If you want to be a tester, you're expected to be at least what's known as a "power user". Meaning, don't just say "bla bla bla is broken". Logs logs logs! Help debug!


    For ALL:
    Know how to use Google. Actually try to find what you need before asking about it, otherwise we clog things up with unnecessary questions/answers.

    Now that the guidelines are down, some words of encouragement!
    If we can just get our foot in the door, we can blow it wide open and pave the road for other roms (such as omni, aokp, beanstalk) which will be SIGNIFICANTLY easier to port with a solid foundation.

    Comment if you're interested.

    Members so far:

    DEVELOPERS:

    @Restl3ss
    @Nonta72
    @moonbutt74
    @CAG-man
    @rodbacon
    @Rubenyz
    @shadowsiul
    -free spot
    -free spot
    -free spot
    *note there is no limit to how many developers can join. Free spot is placed there mainly as a place holder*

    Testers:

    P5200:
    @christty31
    @bithunter_99
    -free spot
    -free spot

    P5210:
    @mzheng086
    -free spot
    -free spot
    -free spot

    P5220:
    @javee
    -free spot
    -free spot
    -free spot

    *tester places are limited*
    View
    13
    N
    nels83
    TWRP 2.8.6.0

    TWRP 2.8.6.0 for P5200 and P5210 is now available (all compiled from source :) but we need to add a kernel module by hand so it's not fully automatic for now).
    I checked the kernel and the most serious EMMC Bugs fixes are applied (Samsung eMMC secure erase bug and MAG2GA TRIM bug) so there should be no problem. However I'm not responsible of what can happen to your device...

    I think all functionalities are here (including MTP, Mass storage, battery, CPU temp, brightness). For the fearless testers, the files are here. You will find .img to flash with heimdall, .tar to flash with odin and .zip to flash with cwm/twrp (choose the one you prefer).
    View
    13
    N
    nels83
    cm-12.1-20150503-UNOFFICIAL

    New upload 20150503 : P5200 / P5210

    Instructions available here
    Warning you need the latest TWRP version to flash: P5200 / P5210

    What's new
    - Multiuser enabled (thanks @bbr999)
    - IR blaster fixed (thanks @KingUsman)
    - Long press on home set to recent apps by default
    - opensource sensors hal (still needs 2 binary blobs)
    - Some cleanup (and maybe more bugs...)

    Can you tell me if it works correctly for you ? If everything is ok I'll create a thread in the developers section ;)
    View
    10
    Angel_666
    Angel_666
    Hazou said:
    I did notice that all others are quick to backport. Just small modifications are needed. But the hwcomposer, oh god... That will take ages to backport. I am hoping for some sources from motorola to speed that up.
    Click to expand...
    Click to collapse

    Finally, i boot this devil! The new CM launcher is BEAUTIFUL!

    screenshot.jpgscreenshot1.jpgscreenshot2.jpgscreenshot3.png
    View

New posts