[ROM][CM10.1][BCM21654] Development & Discussion]

Search This thread

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Status for Cm10.1 on pocket neo duos (s5312)

Status for Cm10.1 on pocket neo duos (s5312)

First bootable cm 10.1 rom on S5312/S5310
Whats working ?
vibration
hardware buttons
external-sdcard
apps install
egl
camera(video recording force close because of antibanding feature)
sound
sensors
bluetooth ( minor bug only => unable to connect to any devices)
Wi-Fi
Storage
Ril,

whats not working ?





Source:
https://github.com/dhinesh77/android_device_samsung_corsica
 
Last edited:
  • Like
Reactions: Xado

Alonso1398

Senior Member
Jun 23, 2013
241
265
Compiling again... I think thus time the bluedroid problem didn't show, hope it ends without more errors, also a question, when you managed to get to bootanimation, did you disabled hadware rendering by just editing build.prop?

Enviado desde mi GT-S6010L mediante Tapatalk
 
  • Like
Reactions: Xado

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Compiling again... I think thus time the bluedroid problem didn't show, hope it ends without more errors, also a question, when you managed to get to bootanimation, did you disabled hadware rendering by just editing build.prop?

Enviado desde mi GT-S6010L mediante Tapatalk

for the first time disabled hardware rendering, due to that all apps force closes, after fixing egl force close error solved :)
 
  • Like
Reactions: Xado

Alonso1398

Senior Member
Jun 23, 2013
241
265
for the first time disabled hardware rendering, due to that all apps force closes, after fixing egl force close error solved :)

Soo now finished compiling and installed but got a bootloop. Something interesting is that if restore boot from stock via cwm, it passes the bootanimation and a window that says android upgrading appears but when it finishes, then makes the bootanimation again and do the same eternally.
Updated a lot my device tree based on yours. Here is the device tree, the only folder that didn't modified was overlay, also the files from rootdir are the ones from my device (except init.recovery.rhea_ss_ivoryss.rc).

This are the files I'm using as proprietary blobs. Also I haven't modified my kernel source and had to comment"TARGET_USERIMAGES_USE_EXT4" from boardconfig.mk because for some reason was giving errors while compiling.

Also when trying taking logcat via adb it stucks on - waiting for device -

I was so close of getting it to boot :crying:

Edit: I think the files from the rootdir folder on my tree are the ones that should be edited, so already edited them to be like from your tree and I'm compiling again

Edit2: Editing those files to much do even worse, get stucked on the device logo so most of the files from rootdir are still the ones from the device. Also updated the system.prop file that was forgetting but still didn't worked to past bootanimation. Been really hard trying to fix it, could someone give me a hand?
 

Attachments

  • Imagen1558.jpg
    Imagen1558.jpg
    195.7 KB · Views: 375
  • Imagen1559.jpg
    Imagen1559.jpg
    201.4 KB · Views: 379
Last edited:
  • Like
Reactions: Xado

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Soo now finished compiling and installed but got a bootloop. Something interesting is that if restore boot from stock via cwm, it passes the bootanimation and a window that says android upgrading appears but when it finishes, then makes the bootanimation again and do the same eternally.
Updated a lot my device tree based on yours. Here is the device tree, the only folder that didn't modified was overlay, also the files from rootdir are the ones from my device (except init.recovery.rhea_ss_ivoryss.rc).

This are the files I'm using as proprietary blobs. Also I haven't modified my kernel source and had to comment"TARGET_USERIMAGES_USE_EXT4" from boardconfig.mk because for some reason was giving errors while compiling.

Also when trying taking logcat via adb it stucks on - waiting for device -

I was so close of getting it to boot :crying:

Edit: I think the files from the rootdir folder on my tree are the ones that should be edited, so already edited them to be like from your tree and I'm compiling again

Edit2: Editing those files to much do even worse, get stucked on the device logo so most of the files from rootdir are still the ones from the device. Also updated the system.prop file that was forgetting but still didn't worked to past bootanimation. Been really hard trying to fix it, could someone give me a hand?

yup sure i will.....from two days broad band is not working so I can't come to online. ....

you can take logs without adb too... if rom didn't booted just return back to cwm and flash aroma file mAnager and go to data/tombstones in that folder many files present. . copy allfiles to sd view in gedit ... error message will be in Brown colour... this helps to fix all bugs. .. I fixed for pocket neo like this method only.. since adb is working only after authorizing pc in development settings...
 

Alonso1398

Senior Member
Jun 23, 2013
241
265
yup sure i will.....from two days broad band is not working so I can't come to online. ....

you can take logs without adb too... if rom didn't booted just return back to cwm and flash aroma file mAnager and go to data/tombstones in that folder many files present. . copy allfiles to sd view in gedit ... error message will be in Brown colour... this helps to fix all bugs. .. I fixed for pocket neo like this method only.. since adb is working only after authorizing pc in development settings...

Thanks a lot, didn't know that trick of aroma file manager, now finally made it boot :victory::victory:

Status:
Whats working?
-It boots
-Touch
-Hardware buttons (home fixed and now wakes the device)
-Camera (all modes)
-Vibration
-Rotation
-CRT effect
-Sound
-Wi-fi
-Bluetooth (it can receive files but not sure if it can send)
-Storage (both internal and external)
-Button for start reproducing music tough it can't stop it
-Microphone
-Ril

What's not working?
-fm radio


Notes:
-For some reason the glow effect wile sliding is orange instead of blue :p

Edit: Link to the thread here
 

Attachments

  • Imagen1560.jpg
    Imagen1560.jpg
    193.9 KB · Views: 403
  • Imagen1561.jpg
    Imagen1561.jpg
    218.5 KB · Views: 383
  • Imagen1562.jpg
    Imagen1562.jpg
    249.3 KB · Views: 374
  • Imagen1568.jpg
    Imagen1568.jpg
    237.3 KB · Views: 351
Last edited:

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Thanks a lot, didn't know that trick of aroma file manager, now finally made it boot :victory::victory:

Status:
Whats working?
-It boots
-Touch
-Hardware buttons (home fixed and now wakes the device)
-Camera (I think)
-Vibration
-Rotation
-CRT effect

What's not working?
-Sound
-Ril
-Wi-fi
-Bluetooth
-Storage (both internal and external)
-No baseband

Notes:
-The button for start reproducing music I think it works but since there's no music because of storage problems, it can't reproduce anything but long pressing the button will open Apollo
-For some reason the glow effect wile sliding is orange instead of blue :p
-Also is it me or the unlock glow thing is kinda small?


Nice, i amanged to mount external storage but not internal memory, though external storage is working still many apps not opening because of no internal storage(since internal is seted as default)...

Latest strategy:
1.Wifi Hotspot working (but normal WIFI not working)
2. Bluetooth able to turn on and searching devices, but unable to connect to that..
3. Hardly tried still ril coulnt be fixed :(
 

Alonso1398

Senior Member
Jun 23, 2013
241
265
Nice, i amanged to mount external storage but not internal memory, though external storage is working still many apps not opening because of no internal storage(since internal is seted as default)...

Latest strategy:
1.Wifi Hotspot working (but normal WIFI not working)
2. Bluetooth able to turn on and searching devices, but unable to connect to that..
3. Hardly tried still ril coulnt be fixed :(

I made dual boot to speed up process but for some reason every build made isn't booting even if I know it's going to boot :( and tombstones sometimes aren't generated so will going to download source again...

I keeped a booting build and fixed sound for it, so my next step is try fixing storage (since both internal and external aren't working)
 

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
I made dual boot to speed up process but for some reason every build made isn't booting even if I know it's going to boot :( and tombstones sometimes aren't generated so will going to download source again...

I keeped a booting build and fixed sound for it, so my next step is try fixing storage (since both internal and external aren't working)

bro over 95% of all bugs solved except one thats is ril :p
 

Alonso1398

Senior Member
Jun 23, 2013
241
265
any progress regarding ril ?

Not so far, and this error 7 problem is worrying me, the builds shouldn't give that error since the device tree is almost the same as before when I was on the vbox, so being slowed down trying to fix it but I think my only actual solution is being replacing system folder on older flashable builds :( also storage seems like a headache for my device, already looked at your tree but still not working:(
 

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Not so far, and this error 7 problem is worrying me, the builds shouldn't give that error since the device tree is almost the same as before when I was on the vbox, so being slowed down trying to fix it but I think my only actual solution is being replacing system folder on older flashable builds :( also storage seems like a headache for my device, already looked at your tree but still not working:(

dont worry bro i am here to help you between , all issues on samsung pocket neo duos is solved including ril....
 

Alonso1398

Senior Member
Jun 23, 2013
241
265
Thanks a lot, the weird not installing problem it still there, however I can take the old working build and replace the system folder and boot.img with new ones compiled so somehow that way I can still be working however replacing the META-INF from the new builds doesn't work. I'm trying to apply the fixes for my device so now so far internal storage is finally working but external still doesn't, now that camera opens, discovered that camcoder isn't working for me, and bluetooth its activating but actually don't know if it can connect to other devices.
Thanks a lot for the help you are offering, really.

Edit: Wi-fi fixed :) however still without baseband and ril

Enviado desde mi MW0711 mediante Tapatalk
 
Last edited:

Alonso1398

Senior Member
Jun 23, 2013
241
265
hi bro , i saw on github that you have merged pull request, w8ing for outcome :cool:

Thanks a lot for those pull requests, they fixed external storage tough internal just needed some changes. However ril still isn't working, I think that even my phone doesn't detect the sim card. Also I think microphone isnt' working too:(

At least most functions are working now thanks to you :highfive:
 

dhinesh77

Senior Member
Nov 30, 2012
244
274
Namakkal
www.ddworlds.webs.com
Thanks a lot for those pull requests, they fixed external storage tough internal just needed some changes. However ril still isn't working, I think that even my phone doesn't detect the sim card. Also I think microphone isnt' working too:(

At least most functions are working now thanks to you :highfive:

Do you patched the patches mentioned by pawitp in thread for grand duos ? ....
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    yup sure i will.....from two days broad band is not working so I can't come to online. ....

    you can take logs without adb too... if rom didn't booted just return back to cwm and flash aroma file mAnager and go to data/tombstones in that folder many files present. . copy allfiles to sd view in gedit ... error message will be in Brown colour... this helps to fix all bugs. .. I fixed for pocket neo like this method only.. since adb is working only after authorizing pc in development settings...

    Thanks a lot, didn't know that trick of aroma file manager, now finally made it boot :victory::victory:

    Status:
    Whats working?
    -It boots
    -Touch
    -Hardware buttons (home fixed and now wakes the device)
    -Camera (all modes)
    -Vibration
    -Rotation
    -CRT effect
    -Sound
    -Wi-fi
    -Bluetooth (it can receive files but not sure if it can send)
    -Storage (both internal and external)
    -Button for start reproducing music tough it can't stop it
    -Microphone
    -Ril

    What's not working?
    -fm radio


    Notes:
    -For some reason the glow effect wile sliding is orange instead of blue :p

    Edit: Link to the thread here
    3
    CM11 WIP ...

    2s7yik1.jpg
    ,
    eq1ibm.jpg

    2d4eoy.jpg
    .
    2u43hcn.jpg


    except dual sim almost everything not working(force close).. only sim related apps like messaging,calling works...

    This state is kinda opposite to cm10.1, whereas in cm10.1 except ril almost everything worked :p ...

    lets hope to have stable one :) ...

    all the best for exams @Alonso1398

    EDIT:

    logcat for ril

    Code:
    adb logcat -b radio -v time -d > ril.txt

    in my point of view radio logcat is useless for our device, it shows various errors but still everything working good :p ..

    i think ril patch is present in cm10.1 as default.. so i think need to concentrate on init.hardware.rc , properirity files, ril class
    3
    Soo now finished compiling and installed but got a bootloop. Something interesting is that if restore boot from stock via cwm, it passes the bootanimation and a window that says android upgrading appears but when it finishes, then makes the bootanimation again and do the same eternally.
    Updated a lot my device tree based on yours. Here is the device tree, the only folder that didn't modified was overlay, also the files from rootdir are the ones from my device (except init.recovery.rhea_ss_ivoryss.rc).

    This are the files I'm using as proprietary blobs. Also I haven't modified my kernel source and had to comment"TARGET_USERIMAGES_USE_EXT4" from boardconfig.mk because for some reason was giving errors while compiling.

    Also when trying taking logcat via adb it stucks on - waiting for device -

    I was so close of getting it to boot :crying:

    Edit: I think the files from the rootdir folder on my tree are the ones that should be edited, so already edited them to be like from your tree and I'm compiling again

    Edit2: Editing those files to much do even worse, get stucked on the device logo so most of the files from rootdir are still the ones from the device. Also updated the system.prop file that was forgetting but still didn't worked to past bootanimation. Been really hard trying to fix it, could someone give me a hand?

    yup sure i will.....from two days broad band is not working so I can't come to online. ....

    you can take logs without adb too... if rom didn't booted just return back to cwm and flash aroma file mAnager and go to data/tombstones in that folder many files present. . copy allfiles to sd view in gedit ... error message will be in Brown colour... this helps to fix all bugs. .. I fixed for pocket neo like this method only.. since adb is working only after authorizing pc in development settings...
    1
    Keep it up alonso i wish u make it stable or almost stable as soon as possible :happy:

    Thanks Rahul, made new thread for cm 10.1. It is now almost stable, need help fixing video recorder (log) and calls (log)

    I tought the call problem was related to proximity sensor but I'm not really sure now because apps like Viber for making calls works perfectly (screen turns on and off without problems and doesn't reboot) however when I answer an incoming normal call, it lasts for 2 or 3 seconds and the screen was always turned on in that moment.
    Also I think it could be related to bluetooth config because of this line on logcat:
    Code:
    E/BluetoothPhoneService( 1845): Could not get a handle on Connection object for the call
    1
    Status for Cm10.1 on galaxy music

    Status for Cm10.1 on galaxy music