[NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Acer A700

Search This thread

pawitp

Inactive Recognized Developer
Oct 30, 2010
3,928
21,276
Bangkok
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

WARNING: I've bricked my tablet into APX mode around the 10th time of flashing this ROM (recovery froze and it rebooted into APX). The new (Update 1) recovery should be safer than the old one, but flash at your own risk!

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Device-specific source code for the Acer A700 are available from https://github.com/CyanogenMod/android_device_acer_a700 and https://github.com/CyanogenMod/android_kernel_acer_t30

Do not submit bug on CyanogenMod issue tracker

Downloads
Latest Nightly: http://download.cyanogenmod.org/?device=a700
Google Apps: http://goo.im/gapps

Installation
  1. Install CWM recovery from http://xdaforums.com/showthread.php?t=1791165 (note that the old touch version will not work because of incorrect default.prop from CWM builder)
  2. Do a Nandroid Backup!
  3. Install the ROM using ClockworkMod Recovery
  4. Optionally install the Google Addon
  5. Wipe data if coming from stock

Changelog
A rough changelog is (will be) available here:
http://changelog.bbqdroid.org/#/cm10.1/a700 or http://10.1.cmxlog.com/?device=a700

Reporting Bugs

You are allowed to report bugs only in this thread.

  • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
  • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.

Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:

Did you--
wipe:
 restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:

The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

Note to Official JB Users

Jelly Bean bootloader is only supported on 201212023-EXEPRIMENTAL and later NIGHTLIES.
 

Attachments

  • device-2013-02-07-083959.jpg
    device-2013-02-07-083959.jpg
    17.7 KB · Views: 3,153
  • device-2013-02-07-084108.jpg
    device-2013-02-07-084108.jpg
    21 KB · Views: 2,978
  • device-2013-02-07-084136.jpg
    device-2013-02-07-084136.jpg
    19.3 KB · Views: 2,818
  • device-2013-02-07-084146.jpg
    device-2013-02-07-084146.jpg
    15.3 KB · Views: 2,611
  • device-2013-02-07-083900.jpg
    device-2013-02-07-083900.jpg
    11.5 KB · Views: 2,393
  • device-2013-02-07-083839.jpg
    device-2013-02-07-083839.jpg
    21.2 KB · Views: 2,482
Last edited:

pawitp

Inactive Recognized Developer
Oct 30, 2010
3,928
21,276
Bangkok
Creating a new thread since CM 10.1 is significantly different from CM 10 and there will be different bugs.
 
  • Like
Reactions: Sterist

Chris0706

Senior Member
May 18, 2010
261
36
bavaria
So far i got the OTA update from your preview of CM10.1, no problems...

Suggestions:

- Move softwarebuttons to border to reach them easier with hands on the side of the tablet
- Shrink the quicksettings tiles

One question about the lockscreen, what does a widget need to appear in the lockscreen widgets list ?
 
  • Like
Reactions: schlex2010

switchgott

Senior Member
Jan 22, 2007
1,238
120
@Chris0706

Please, could you make a video, how 10.1 looks like on acer a700??

BIG THANKS!!
 

kiteman44

Senior Member
Jan 13, 2007
163
65
is it more smoother than JB stock ?

i'm balanced between try your rom and keep my warranty...
 

zwolf4444

Senior Member
Sep 28, 2010
212
22
Is there any way to switch to the pre-4.2 tablet UI? (as opposed to the new phone-like UI)?
 

OCmylife

Senior Member
Oct 15, 2010
530
278
38
Bocholt(NRW)
I`m on the first initial release from pawitp and the battery life is absolutely awesome. 2% lost in 2days and 9 hours Standby with 10 Min Display time. It could be a little bit smoother though. Could we set the CPU clock a little bit highter with an easy echo command? I have experience with Arch and Gentoo, but I don`t want to brick my device with modifying the kernel myself.
 

Chris0706

Senior Member
May 18, 2010
261
36
bavaria
My experience show slightly reduced battery life time ... about the smoothness its like 4.1 for me.

If you want a video go to youtube for it, theres nothing different for 4.2 on the a700 as on other tablets.
 

kiteman44

Senior Member
Jan 13, 2007
163
65
i think djsven ask you for a video not to see how 4.2 looks like (system) but how 4.2 runs (speed, smooth, etc etc) especially on our tablet.
He (and i) wants to compare 4.2 system integration against JB stock.
 

BonzenPaule

Senior Member
Jun 19, 2012
70
21
Munich
Google Pixel 7
I installed the newest version (cm10.1-20121221) but I can't add my Google account. Is there something I can do to fix it? Before that I had the last cm10 installed(cm10-20121211) and i did not wipe.
 
Last edited:

Webitu

Member
Jul 2, 2012
38
3
GPU Driver

What about the GPU Driver? is it the Nexus 7 Driver? because Acer does not have a driver for Android 4.2 yet. The other 4.2 (Preview) ROM has the Nexus 7 driver and the Performance was not good.

Webitu
 

pawitp

Inactive Recognized Developer
Oct 30, 2010
3,928
21,276
Bangkok
What about the GPU Driver? is it the Nexus 7 Driver? because Acer does not have a driver for Android 4.2 yet. The other 4.2 (Preview) ROM has the Nexus 7 driver and the Performance was not good.

Webitu

The SurfaceFlinger was patched so that the 4.1 driver can be used. There are still some unknown compatibility issue which causes the homescreen to not be as quick as it should though.

Sent from my A700 using xda app-developers app
 
Last edited:
  • Like
Reactions: Webitu

JasonJoel

Senior Member
Apr 23, 2008
1,782
570
I've had my A700 since launch. Running stock.

I finally got off my butt and rooted and installed 10.1.

Looking great! You're doing a really great job!

Sent from my A700 using Tapatalk 2
 

Webitu

Member
Jul 2, 2012
38
3
The SurfaceFlinger was patched so that the 4.1 driver can be used. There are still some unknown compatibility issue which causes the homescreen to not be as quick as it should though (it has been there since CM10 though).

Sent from my A700 using xda app-developers app

Okay thank you. Does the ROM include the Gameloft patch? so that more gameloft games are visible in the Play Store?

Webitu
 

jameschecker

Member
Apr 5, 2008
14
1
Hi all,

Just upgraded yesterday from stock to cm10.1
Runs fine, no issues so far.
I only had issues when i reduced the amount of startpages from default 5 to 3. Athen the launcher crashes.
After switchting back to default, no moore issues.

Thanks to all developers, great job!!!!!!!!!!!!!
Markus
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.

    WARNING: I've bricked my tablet into APX mode around the 10th time of flashing this ROM (recovery froze and it rebooted into APX). The new (Update 1) recovery should be safer than the old one, but flash at your own risk!

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Device-specific source code for the Acer A700 are available from https://github.com/CyanogenMod/android_device_acer_a700 and https://github.com/CyanogenMod/android_kernel_acer_t30

    Do not submit bug on CyanogenMod issue tracker

    Downloads
    Latest Nightly: http://download.cyanogenmod.org/?device=a700
    Google Apps: http://goo.im/gapps

    Installation
    1. Install CWM recovery from http://xdaforums.com/showthread.php?t=1791165 (note that the old touch version will not work because of incorrect default.prop from CWM builder)
    2. Do a Nandroid Backup!
    3. Install the ROM using ClockworkMod Recovery
    4. Optionally install the Google Addon
    5. Wipe data if coming from stock

    Changelog
    A rough changelog is (will be) available here:
    http://changelog.bbqdroid.org/#/cm10.1/a700 or http://10.1.cmxlog.com/?device=a700

    Reporting Bugs

    You are allowed to report bugs only in this thread.

    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.

    Code:
    What is your--
    Phone model:
    Radio (baseband):
    CM version:
    CM Download url:
    Gapps version:
    
    Did you--
    wipe:
     restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    CMSettings/Performance settings (other than stock):
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:

    The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

    Note to Official JB Users

    Jelly Bean bootloader is only supported on 201212023-EXEPRIMENTAL and later NIGHTLIES.
    11
    @pawitp Is Cyanogenmod 10.2 (Android 4.3) realistic for our a700?

    Sent from my rooted Acer Iconia A700 running IconiaN with Tapatalk HD

    It'll probably eventually get it. I just don't have the free time right now to port it.
    6
    Re: [NIGHTLY][ROM][4.2.1] CyanogenMod 10.1 for Acer A700

    I'm aware of that. did you already tried it and how does it look? does the image gets upscaled and filtered or how?

    Run this from adb shell or root terminal

    Code:
    am display-size 1200x800
    am display-density 160

    Then reboot. Use this to restore original setting.

    Code:
    am display-size reset
    am display-density reset

    Sent from my GT-I9000 using xda app-developers app
    5
    Thank you for the logcat! I've triggered a test build with the fix. Please test if it works or not.

    http://get.cm/get/jenkins/33597/cm-10.1-20130706-EXPERIMENTAL-a700-fcfix.zip
    5
    Has anyone had success tethering to a phone? I've tried tethering my A700 to my GT-i9300 both running cm10.1 and though they connect using Wi-Fi hotspot and bluetooth tethering, internet only works when the i9300 is using Wi-Fi from my router. If my i9300 is on data and I try to open a browser or internet reliant app like Facebook, Gmail etc., on the A700, it tries to load unsuccessfully. I know others on the i9300 cm10.1 discussion thread have had success with other tablets. I couldn't find a tethering setting when on stock (A700) but would expect it to work if it works when my phone has a Wi-Fi connection to my router!

    I tether from my Galaxy S1 just fine. Have you tried your accessing I9300's internet from another device (e.g. laptop) to verify that it is indeed providing a connection?

    Has anyone tried LagFix/FStrim on their device running this version of CM? https://play.google.com/store/apps/details?id=com.grilledmonkeydonate.lagfix&hl=en

    As a side note, any idea if it is possible, in the works, etc to get TWRP working on our device? Is it possible or easy to port it? I find it more user friendly for flashing the nightlies along with the Chrome Desktop patch, Sony Certificate Installer etc that I do along with every update.

    FStrim will have no effect on our device since I've disabled TRIM support within the kernel, as it is this command that causes bricks on our device. (There is a bug in Samsung's EMMC firmware.)

    Porting TWRP should be fairly easy to do.

    EDIT: Attached. Not creating a new thread for this since I won't really be supporting it.

    Code:
    DEVICE_RESOLUTION := 1920x1200
    RECOVERY_SDCARD_ON_DATA := true
    TW_INTERNAL_STORAGE_PATH := "/data/media"
    TW_INTERNAL_STORAGE_MOUNT_POINT := "data"
    TW_EXTERNAL_STORAGE_PATH := "/external_sd"
    TW_EXTERNAL_STORAGE_MOUNT_POINT := "external_sd"