[Q] Can't update CWM : (bad) Installation aborted.

Starting recovery on Tue Sep  2 12:35:39 2014
framebuffer: fd 4 (480 x 800)
E:unknown volume for path [/system]
recovery filesystem table
=========================
  0 /tmp ramdisk (null) (null) 0
  1 /boot emmc /dev/block/mmcblk0p5 (null) 0
  2 /recovery emmc /dev/block/mmcblk0p6 (null) 0
  3 /efs ext4 /dev/block/mmcblk0p1 (null) 0
  4 /cache ext4 /dev/block/mmcblk0p7 (null) 0
  5 /system ext4 /dev/block/mmcblk0p9 (null) 0
  6 /data ext4 /dev/block/mmcblk0p10 (null) 0
  7 /preload ext4 /dev/block/mmcblk0p12 (null) 0
  8 /emmc vfat /dev/block/mmcblk0p11 (null) 0
  9 /sdcard vfat /dev/block/mmcblk1p1 (null) 0

W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
I:device_recovery_start()
PhilZ Touch 3
CWM Base version: 6.0.1.8
Command: "recovery"

ro.boot.serialno=0009aa09441a2f
ro.sec_debug.enable=0
ro.serialno=0009aa09441a2f
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.debug_level=unknown
ro.emmc_checksum=unknown
ril.dualmode.change=unknown
ro.hardware=smdk4210
ro.revision=14
ro.factorytest=0
ro.uart_debug=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp
init.svc.ueventd=running
init.svc.recovery=running
adb.recovery=1
init.svc.adbd=running
service.adb.root=1

I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...

-- Installing: /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip
Finding update package...
I:Update location: /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip
Opening update package...
E:Can't open /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip
(bad)
Installation aborted.