[ROM][4.2.2r1]p6200/p6210/t869](7OCT2013kernel)PAC-Man ROM 4.2 Milestone1 release

Search This thread

daniel_hk

Inactive Recognized Contributor
Nov 12, 2012
1,634
5,344
Hong Kong
Realme X2
I'm having a hard time with the phone or dialer since this upgrade. It will not hang up when finished with a call. I have to force stop it. Anybody else have or heard of this problem? Thinking about going back to the last update, didn't have any problems with that ROM at all.

There was a teleophony patch needed in 7.7. I don't know p6200 has the same issue since no one report. Thanks for your report.

Here is the patch for p6200 I just built. : View attachment p6200-PAC-TelephonyPatch.zip
Flash it in recovery would fix the telepony issue.

Good luck!

PS. As I mentioned many times in this thread, I don't have a 7.0 to test. You guys have to report before I can do something... ;)
 
  • Like
Reactions: schlork

schlork

Senior Member
Feb 23, 2009
256
42
There was a teleophony patch needed in 7.7. I don't know p6200 has the same issue since no one report. Thanks for your report.

Here is the patch for p6200 I just built. : View attachment 2150185
Flash it in recovery would fix the telepony issue.

Good luck!

PS. As I mentioned many times in this thread, I don't have a 7.0 to test. You guys have to report before I can do something... ;)

Thanks for providing this patch! Iam using my tab very rare as phone, so I didn't notice that phone function was not useable.

Other problem, I have is copying file prom PC to Tab. Neither by USB cable, nor wireless it is possible. The connection always interupts at some point. Any ideas?
 
  • Like
Reactions: cucodev

freeman00

Member
Jun 24, 2009
11
4
Hi there ,thanks for the great rom i just wanted to report a bug in the camera, the led light if activated will not shut down from the menu it will stay on until reboot

Envoyé depuis mon GT-p6200 en utilisant Tapatalk 4 Beta
 
Last edited:
  • Like
Reactions: daniel_hk

daniel_hk

Inactive Recognized Contributor
Nov 12, 2012
1,634
5,344
Hong Kong
Realme X2
Hi there ,tanks for thé great rom i just wanted to report a bug in the camera, the led light if activated will not shut down from the menu it will stay on until reboot

Envoyé depuis mon GT-p6200 en utilisant Tapatalk 4 Beta

I'm quite busy on a job lately...:cyclops: I can only test it with my p6800 when I have time. Other p6200 owners, please confirm.
 
  • Like
Reactions: freeman00

skivnit

Senior Member
May 21, 2012
2,708
365
Can't flash latest gaps says it's for 4.3
Nvm I flashed the correct ones.

Sent from my GT-I9500 using xda premium
 
Last edited:

Gotcher

Senior Member
Oct 30, 2009
218
33
OnePlus 7T
Samsung Galaxy Tab S7 FE
For some reason I'm missing the option button in all apps (for example I can't restore my apps and settings with TitaniumBackup because I can't change the backup directory). What am I doing wrong?! Help me please.

Edit: to specify this strange problem a bit: the original Wikipedia APP does have an option button in the right lower corner. Poweramp however doesn't have this option button, therefore I can't change my settings. The same problem is present in several apps. :( I had CM 10 before.Is it possible that some of the old files interfere with the new ones from this ROM? I'm really confused...

P.S.: Plus, when I'm flipping the tablet in widescreen, I can only see a very small line where the soft menu buttons should be (back button, home button and multitasking). Again, what's wrong? Thanks!
 
Last edited:

Gotcher

Senior Member
Oct 30, 2009
218
33
OnePlus 7T
Samsung Galaxy Tab S7 FE
P.S.: Plus, when I'm flipping the tablet in widescreen, I can only see a very small line where the soft menu buttons should be (back button, home button and multitasking). Again, what's wrong? Thanks!

So I could find the place where I can change the buttons but I wasn't able to fix them in widescreen - there are still two very small icons beside each other (back and home button), but I can only seem to press the home button when I press on it because it always takes me back to the home screen.

I would like to deliver a screenshot, but Power + Volume Down doesn't work (or is it a different button combination now)?
 

Gotcher

Senior Member
Oct 30, 2009
218
33
OnePlus 7T
Samsung Galaxy Tab S7 FE
So I was finally able to take a screenshot of my problem:

Screenshot_2013-08-26-19-37-23.jpg
 

thangbithit

Senior Member
Mar 13, 2012
52
9

I once installed this rom, and the problem like yours usually happened. I'm now sticking with PA rom and it's a lot comfortable with less bugs.

[Some words for our developer]
Daniel_hk, there's no other magical wizard but you. By this time being, there has been no developer taking a glance at our Tab Plus and Tab 7.7 :rolleyes:
I find my way to this thread everyday just to see something magical happen, but it seems that you leave us and there's no CM10.2 :crying:
 

daniel_hk

Inactive Recognized Contributor
Nov 12, 2012
1,634
5,344
Hong Kong
Realme X2
I once installed this rom, and the problem like yours usually happened. I'm now sticking with PA rom and it's a lot comfortable with less bugs.

[Some words for our developer]
Daniel_hk, there's no other magical wizard but you. By this time being, there has been no developer taking a glance at our Tab Plus and Tab 7.7 :rolleyes:
I find my way to this thread everyday just to see something magical happen, but it seems that you leave us and there's no CM10.2 :crying:

I was mentioned before, I'm busy on a job now. It will occupy me a few months. I have to earn a few bugs to survive..:p
I study 4.3 briefly before I started my job. It would be much harder than 4.2.2. We need a kernel that support SELinux but there is none... BT and phone will also need serious fixes as 4.2.2.
However, I'll give a try on my belove 7.7 and our bro. 7.0 after my job is finished. Although I also have a Nexus 7, I have no plan to retire my 7.7 yet.;)

Anyone want to help will be very welcome! :)
 
  • Like
Reactions: quietmode01

Gotcher

Senior Member
Oct 30, 2009
218
33
OnePlus 7T
Samsung Galaxy Tab S7 FE
I was mentioned before, I'm busy on a job now. It will occupy me a few months. I have to earn a few bugs to survive..:p
I study 4.3 briefly before I started my job. It would be much harder than 4.2.2. We need a kernel that support SELinux but there is none... BT and phone will also need serious fixes as 4.2.2.
However, I'll give a try on my belove 7.7 and our bro. 7.0 after my job is finished. Although I also have a Nexus 7, I have no plan to retire my 7.7 yet.;)

Anyone want to help will be very welcome! :)

Is there any way for me to fix my widescreen button bug? Thank you for all your effort!
 

daniel_hk

Inactive Recognized Contributor
Nov 12, 2012
1,634
5,344
Hong Kong
Realme X2
Is there any way for me to fix my widescreen button bug? Thank you for all your effort!

I'm not quite sure what you meant? :confused:

If you meant the menu button, it can be set permanently shown in:
Settings > Rom Control > Navigation Bar > Menu visibility > Always Show

If you are in PIE, there will be a button at the right of the Recent key.

Hope thats what you meant.

Good luck! ;)
 

ekion

Member
Mar 2, 2008
8
1
I flashed this rom and it was great but not problem free. Now I want to give my tab away to my relative and wish to give them a stable experience so I want to get it back to "stock" condition. Following the instructions here: http://xdaforums.com/showthread.php?t=2295215
I was able to install and "pass" fine but it will just boot loop. Samsung appears over and over and over. Is it because this has a custom kernel? If the stock rom won't boot from the custom kernel where can i find the stock kernel? i've tried searching but no luck.

Please help as I need to give it away tmr. Any hints or guidance will be much appreciated.

Thank you.
 

fefopumper

Senior Member
Nov 27, 2010
71
10
I flashed this rom and it was great but not problem free. Now I want to give my tab away to my relative and wish to give them a stable experience so I want to get it back to "stock" condition. Following the instructions here: http://xdaforums.com/showthread.php?t=2295215
I was able to install and "pass" fine but it will just boot loop. Samsung appears over and over and over. Is it because this has a custom kernel? If the stock rom won't boot from the custom kernel where can i find the stock kernel? i've tried searching but no luck.

Please help as I need to give it away tmr. Any hints or guidance will be much appreciated.

Thank you.

Do a wipe and reboot.

Sent from my GT-P6200 using xda app-developers app
 
  • Like
Reactions: ekion

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    pacman_header.png

    download.php
    PAC stands for ParanoidAndroid + AOKP + CyanogenMod. It is mainly a cm10.1 base rom with the PA features and AOKP settings.
    I decided to port PAC to our GalaxyTab (7.7 and Plus) after testing it for a few days on my Nexus 7. It has the status bar in Extended Desktop that I want...Although it is harder than I thought, it is done.;)
    Cheers!

    You probably need a factory reset (even from my cm10.1 and pa3) to let the AOKP services to work properly.
    Do aware of the eMMC brick bug!
    Good luck!

    7/10/2013
    Kernel update. LagFix/Fstrim is working now.

    6/10/2013
    It is quite a while that I haven't update the ROMs. We are having a long holiday which allow me to work on my belove 7.7 again. Stuggling for a few days with cm10.2 on the flu. No luck for 4.3 yet! It just reboot after showing the lock screen...:eek:Something wrong with the SystemUI, I supposed.
    The least I can do is to upgrade the existing 4.2.x for Tab-Plus. It is the Milestone release of PAC now. I'll try 4.3 again when I'm free...;)

     History

    29/7/2013
    Telephony patch for p6200 for the 17/7/2013 build. : View attachment p6200-PAC-TelephonyPatch.zip.
    It will fix the call hangup and keypad issue.

    17/7/2013
    Native NTFS support is included in the latest build. Also found a bug in Sound Settings, don't know if it work for p6210 now. Please report. ;)

    29/6/2013
    The latest builds are uploading now. Auto-brightness adjust and boot animation are fixed.Cheers!

    22/6/2013
    Here is the View attachment PhonePatch.zip for Apn settings. Flash it in recovery will get the APN settings back. Work for all models ;)
    The bootanimation doesn't work after sizing but it is ok in any the boot animation preview apps :confused: Don't know why yet. Will leave it for the next build.

    21/6/2013
    Bug fix release is uploading now. The oversize wallpaper mask is fixed. Please report.

    20/6/2013
    PAC v23.0.0 is a quite stable rom which has the latest HALO in PA3.60. As before, I always welcome reports/suggestions in any way. Uploading now.

    Change log: :victory:
    Please visit PAC ROM for official change log and features

    Know issues: :(
    Almost the same as PA3 for GT-Plus

    Downloads: :highfive:
    goo.im: http://goo.im/devs/daniel_hk/rom/pac
    mirror1: http://pan.baidu.com/share/link?shareid=3714561904&uk=1512265283#dir/path=/PAC/GT-Plus
    mirror2: https://mega.co.nz/#F!pJB1yRoY!XIGOMyYTrAdcALfURNh95A
    mirror3: http://www.kuaipan.cn/file/id_39173572073096195.htm#kp|39173572073096202|0
    kernel: http://goo.im/devs/daniel_hk/rom/kernel/GT-Plus

    Latest pa_gapps: http://goo.im/devs/paranoidandroid/roms/gapps
    If you don't need any of the gapps, disable it to increase free ram

    Source: :cool:
    kernel & device trees
    github: https://github.com/danielhk?tab=repositories

    Credits: :good:
    ** The PAC-Man ROM team
    ** The CyanogenMod Team who keep many devices alive!
    ** The ParanoidAndroid Team who create many cool features
    ** Thanks Espen96 for setup a host for me!
    ** All those who help our cool tab's developments!

    Donations:

    3
    i installed the latest jun21 ROM , APN issue is still there, com.android.phone process FC's.
    I think I manually pushed my backed up /system/etc/apn-conf.xml, I have phone and data working. Still would like to be able to edit APN. I will try to get logcat soon.
    Other than this issue, very nice ROM. well done.

    Yeah, already reported in my 7.7 thread. I'll release a patch in a few hours. The bootanimation and apn settings will be fixed..;)
    2
    well rom downloaded from mirror 3, gapps from goo im.
    u was right about this booting i was waiting 2min then this was up. there is strange thing when tab is "twisted to one side" then screen is black, in normal position i cant see 2/3 of screen cuz its black too, only bellow i can see "normal" screen. This very strange but i can shoot bottons in this black side (blindfold u know). i cant transit panel about choose wifi, cant press skip(its below so can see it) when im pressing this button then screenz dimis... lul any idea i hope its quite clear, i dont know this "specialist" determines. sorry for my english too
    photo: https://www.dropbox.com/s/szc2c74x2orxdr6/2013-06-21-026.jpg

    OK, that was a good hint. It might be the orientation setting as the early PA3.

    I'll look into it, thanks for your report..:good:
    2
    Thanks Daniel for your time, whats max freq for cpu n gpu

    Same as before, CPU 1.4G, GPU is 360MHz. Some changes has been made to stablize the max cpu frequency.
    1
    Can this be flashed from the external SD? I'm getting an error that reads E: Can't open/tmp/sideload/package.zip

    Used cwm recovery, i just did a flash in a folder inside the external card

    Sent from my GT-p6200 using xda app-developers app