YOU ARE ACCEPTING RISK FOR YOUR DEVICE. THE ONLY ONE LIABLE AND RESPONSIBLE FOR YOUR DEVICE IS YOU.
Pre-Req:
(manual method) Build 24.13.2 root with write-protection off
or
(flash method) unlocked bootloader with TWRP recovery installed
Flash Method:
1) Download "24.13.2-tether_install.zip" and place on sdcard
2) Reboot Into TWRP recovery and flash zip. Reboot to system
3) Verify tether works
Manual Method:
1) Download "24.13.2-tether.zip"
2) find system folder and rename the build.prop to build.prop.org
3) Extract the build.prop file from zip and put in system
4) Set permissions for the file to rw-r--r-- (644)
Owner: Read/Write
Group: Read
World: Read
8) Reboot. Verify tether works
Back-To-Stock:
Flash method: Follow flash method procedure (above) with "24.13.2-tether_revert.zip"
Manual method: delete build.prop and remove '.org' from original that was saved earlier. Check permissions (644) and reboot.
bbb
eat more chlorophyll
Pre-Req:
(manual method) Build 24.13.2 root with write-protection off
or
(flash method) unlocked bootloader with TWRP recovery installed
Flash Method:
1) Download "24.13.2-tether_install.zip" and place on sdcard
2) Reboot Into TWRP recovery and flash zip. Reboot to system
3) Verify tether works
Manual Method:
1) Download "24.13.2-tether.zip"
2) find system folder and rename the build.prop to build.prop.org
3) Extract the build.prop file from zip and put in system
4) Set permissions for the file to rw-r--r-- (644)
Owner: Read/Write
Group: Read
World: Read
8) Reboot. Verify tether works
Back-To-Stock:
Flash method: Follow flash method procedure (above) with "24.13.2-tether_revert.zip"
Manual method: delete build.prop and remove '.org' from original that was saved earlier. Check permissions (644) and reboot.
bbb
eat more chlorophyll