[ROM][KK][P6-U06][ HYD52ROM V7] [SUPERFAST & Stable][V7 16-02-14]
- Thread starter husen4u
- Start date
-
- Tags
- development hyd52rom p6-u06 rom
Hello, I would like to install custom ROM on my P6.
So I have TIM Huawei P6 with B110 JB ,I already rooted it and installed TWRP.
Can I just install to install http://xdaforums.com/show....php?t=2630208 ?
Or I should first flash B118CN ? And does it will cause any trouble , because I have TIM(carrier) custom B110 firmware right now?
So I have TIM Huawei P6 with B110 JB ,I already rooted it and installed TWRP.
Can I just install to install http://xdaforums.com/show....php?t=2630208 ?
Or I should first flash B118CN ? And does it will cause any trouble , because I have TIM(carrier) custom B110 firmware right now?
PLEASE reupload Gapps... megaupload link is long dead..... or confirm development of this rom is closed...BTW thanks for the rom...
bug for me is no gapps, sdcard permission denied (i cant format the internal storage due to shortage of storage and i have files in it.) i had the b708 custom version reinstalled just to recover my files... b708 custom was buggy so i liked your rom more for its speed. thing is i cant find proper gapps to work for it... supersu link is dead too...
thanks.
bug for me is no gapps, sdcard permission denied (i cant format the internal storage due to shortage of storage and i have files in it.) i had the b708 custom version reinstalled just to recover my files... b708 custom was buggy so i liked your rom more for its speed. thing is i cant find proper gapps to work for it... supersu link is dead too...
thanks.
Hello!
Just flashed the ROM, Gapps, wiped all and restarted. I got hte Accent mate logo, then a blue screen with the Ubuntu logo and a sphere rotating. Waited for an hour - nothing. I cant turn of the phone completely and try to enter TWRP, as holding power button for 10 sec reboots and gets the phone to the same blueish screen with the sphere. How shall I proceed? Any way to shut down with button combos?
Regards
Just flashed the ROM, Gapps, wiped all and restarted. I got hte Accent mate logo, then a blue screen with the Ubuntu logo and a sphere rotating. Waited for an hour - nothing. I cant turn of the phone completely and try to enter TWRP, as holding power button for 10 sec reboots and gets the phone to the same blueish screen with the sphere. How shall I proceed? Any way to shut down with button combos?
Regards
Need to install this...can anyone give the link of restore emui launcher....and supersu also ..plz
Sent from my P6-U06 using XDA-Developers Legacy app
Sent from my P6-U06 using XDA-Developers Legacy app
Last edited:
hi
any other link for Gapps and super user please ?
that links is be forbiden
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
any other link for Gapps and super user please ?
that links is be forbiden
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
which one is for this rom ?
i installed the gapps mentioned here , its for the same rom and of course KK
here is the direct link of gapps : https://www.androidfilehost.com/?fid=23311191640114013
and here is the link of the thread : https://xdaforums.com/showthread.php?t=2686544
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
108
V7
Performance Version
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. PLEASE TRY AT YOUR OWN RISK. IF YOU ARE WILLING TO SHARE THIS ROM ON ANY OTHER WEBSITE/BLOG/FORUM PLEASE GIVE PROPER CREDIT TO HUSEN4U.
◢ROM Features ◣
Build From Kitkat Beta With EMUI2.3
Busybox Support
Rooted
init.d Support
Debloated
Custom Bootanimation
Viper Audio(Thanks To Zhuhang)
Pure Performance (Thanks To Jeeko)
Pure Audio Engine 2.0 (Thanks To Jeeko)
Pure Graphics
Xforce Script For Gaming (Thanks To RenzkiPH)
Supercharger (Thanks To Zeppelinrox)
Patched Service.jar For Supercharger (Thanks To Zeppelinrox)
Loopy Smoothness Tweaks
Build.prop Tweaks
everything you've always wanted from a performance engine, but you never dared to ask
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and discover its power!
◢ Audio studio-quality on your phone™ ◣
◢ Features ◣
- Clear sound
- No more track noise
- Beats™ Audio by Dr.Dre
- Audio Pure™ Control not to damage your hearing
- Also compatible with the headphones that don't support audio render of 60kHz
- Where possible, arrange for the conversion of the songs (in background) below 256 kbps to 320kbps
- During playback of songs / sounds make a soft frequency scaling to reduce noise and highlight the track
- It offers more powerful and closed bass
- Efficient even with stock headphones
- Improves a lot the audio call
- Enhance the speakers for playing music without headphones in high quality
I can not tell you everything What are you waiting for? Try it and find out what's missing features!!
◢ Features ◣
- Enable GPU rendernig
- Enable dithering but did not affect consumption!!
- Use the GPU for the management of the touch
- Improve video HW render
- It allows you to play ported ARMV7 games without lags problems
- Increase scores on the AnTuTu graphic rank
- In MDPI devices improves the density pixels and brightness
- Eliminates lag system with the generator of video entropy
- Liquify the UI
Lots Of Build.prop
Feel The Power.
About ViPER's Audio
See here: http://vipersaudio.com/blog/?page_id=11
Software Descriptions
Version: FX version 2.3.1.5 / XHiFi version 2.1.0.2-1
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: December 7,2013 / September 4,2013 - Official Release
Operating environment: Android 2.3 / 4.0 / 4.1 / 4.2 / 4.3 / 4.4
CPU platforms: ARM (ARM11 or higher)
Language: English (US) / Simplified Chinese / Traditional Chinese / Spanish / Polish / Russian
ViPER4Android FX
FX is the main control panel of ViPER’s Audio with all popular ViPER’s Audio settings.
ViPER4Android XHiFi
XHiFi has less settings compare to FX. It has superior audio reconstruction which mainly used for restoring lossy audio quality.
FX Key Features
★ NEW Speaker Optimization ★
First effect for speakers. Try it yourself.
★ Android 4.3 Support ★
ViPER4Android supports Android 2.3 Ginger bread, 4.0 Ice Cream Sandwich and 4.1 upto 4.3 Jelly bean firmwares.
★ Channel Pan ★
Controls left/right channel output. Its not very useful unless your headphone is imbalance or faulty one side. It will be a cure for you.
★ Differential Surround / Haas Effect ★
This is an old feature which ViPER520 had removed from FX in early days.
But after many users requesting it, ViPER520 bring it back to FX
More info on Haas Effect: http://www.mixcoach.com/creating-dep...haas-effect-2/
★ ViPER Fidelity Control ★
★ ViPER Bass ★
With different bass modes, you can have greater bass experience than before!
★ ViPER Clarity ★
With the latest Clarity mode selection, you can balance up heavy bass with high clarity audio that you can never imagine before!
★ Headphone Surround+ (VHS+) ★
With this VHS+, V4A made its way to achieve great surround technologies for Android.
★ Auditory System Protection (Cure Tech+) ★
With normal audio system, listening for more than three hours will feel fatigue, dizzy, tinnitus, irritated and other symptoms.
This is a normal reaction, heavy bass and high volume could cause permanent damage to the human auditory system, but other phenomena can restore through resting.
Viper as a listening experience professional will not ignore this problem. Therefore put a lot of effort to study how to make a "Healing" sound technology, just a small success. But thinking on how to let users experience it.
★ Convolver ★
When an Impulse Response Sample(IRS) is loaded, V4A will process the sound to show the same characteristics of the loaded sample. Through Convolution, samples with effects such as equalizer, surround, reverberation, tube etc can be loaded.
Download and extract IRS files to /ViPER4Android/Kernel/
★ FX Compatible Mode (Only in 4.x) ★
Compatible Mode supports large variety of music players and the players' own EQ/sound effects (system-provided/third party)
Therefore, you don't have to select V4A in Sound Settings > Music Effects, choose anything other than V4A. Just run V4A app and the effects will be working with anything else.
1. In option, switch to Compatible Mode. Reboot, done.
2. In Sound Settings > Music Effects, choose other than V4A.
3. Run V4A app and configure the settings then the effects will work together with the one you chose in Sound Settings.
◢ Installation Instruction ◣
1. You Must Be On B118CN OR B120CN OR ANY UNLOCKED FIRMWARE (B118CN & B120CN CAN BRICK YOUR PHONE SO BE CAREFULL)
2. Install TWRP Recovery
3. Wipe Factory Reset Goto Advance And Wipe Everything Except (Internal And External Storage)
4. Install HYD52ROM_P6_V7_KK.zip
5. Wipe Dalvik/Cache
6. Install Gapps
7.Wipe Dalvik/Cache
8. Install Superuser
9. Wipe Cache Dalvik
10.Reboot To Home Screen
11.Then Apply Mod You Like See Bottom Of The First Post.
Those who are facing superuser problem please download "SUPERSU" from play store and restart your phone. I will fix this in next update.
Old Versions :
V5 : Link
V4 : Link
Credits :
Ross
XDA
Huawei
Surdu_Petru
Exit_only
Bugs :
* ART Not Working So Please Don't Try That
*Superuser Is Working Fine Just Superuser App FC Bug
* You Tell Me
Dont Forget To PRESS THANKS Button
Screenshots :
*Don't Ask Me About Antutu Scores I Really Don't Care About It. All I Care About Is Performance
USERS FEEDBACK :
Okay, I've been using V7 for about a day now. It's great! Responsive, smooth (man, I almost can't believe this rom isn't made out of butter, that smooth), no unwanted FC's so far, and once again, the audio on this rom is just plain amazing. I'd recommend it to anyone that doesn't have it yet
Addon :
Restore EMUI Launcher : link
Reduce Navbar Mod : Link
Note :
You Have To Install Xposed Framework Manually From Xposed App.
New Super Awesome Navbar Softkey Mod For HYD52ROM
This Are Flashable Zip From Recovery. You Can Flash On Any Version Of HYD52ROM For KK
SDK 03
Download : Link
KG Keys :
Download Link : Orange
Download Link : Red
Download Link : Purple
Regards :
HuSeN20CHANGELOG
V7 : 16-02-2014
* Pure Audio Engine Update To Latest Version 13-02-2014
* Xposed 2.4.1 (Those Who Want Themes Can Uninstall Framework)
* Supercharger Scripted By Zeppelinrox
* Patched Service.jar For Supercharger By Zeppelinrox.
* Loopy Smoothness Tweak Added.
* Removed Unwanted Tweaks
* Zipalign Script On Startup By Zeppelinrox
* Gravitybox For Kitkat
* Things I Forget
+++++++++++++++++++++++++++++++++++++
V6
11-02-2014
*Reduce Navbar Size ( After Lot Of Trying I Succeed ) You Will Like This.
*Few Performance Tweaks Added.
*Bootanimation Added.
+++++++++++++++
V5 :
10-02-2014
*Hotspot Bug Fixed
*Some Old Tweaks Removed.
*MPEngine5 Tweak Added
*Xforce Tweak For Gaming Added.
*Added And Removed Some Entries In Build.prop
*Busybox Updated.
*Some Improvement In Gaming Performance And Smoothness. (At First Start Install All Apps And Games Then Restart)
*Working On This From Last 2 Days So Maybe Something I Forget So Will Add When I Remember.
*File Manager Included.
++++++++++++++++++++++++++++++++++++++++++++
## V4 :
3-02-2014
*Fixed Big Mistake With Build.prop Tweaks. (Tweaks Were Clashing With Each Other)
*Removed Xposed ( It Breaks Themes)
*Pure Performance Added Again
*Pure Audio Engine
*Pure Graphics Engine
*Some Smoothness Tweaks.
*Removed Fly-On Mod
*Rebuild From Base Again.
*Breeze Theme Added.
*Some Minor Fixes.
*Things I Forget.
++++++++++++++++++
## V3 :
1-02-2014
*Xposed Added
*Gravity Box Added
*Killjoy Tweaks By Team Kernelizer
*Build.prop Tweaks Added.
*Viper Audio Added With Preinstall Drivers.
*Reduced In Size Of zip File. Upto 50% Reduced.
