AT&T Latest Firmware For There Sense 5 Android 4.2.2 Release.
I took the honors of removing "Boot.img" and "Recovery.img". So it doesnt overwrite your current boot.img or recovery.img... Should of been posted last night ( Feb 16 ) when I did this but was busy with my family afterwards.
Download:
AT&T 5.18 Firmware MD5 Checksum - 78aa08f90d38c16f1b0a93f508bece8f
I took the honors of removing "Boot.img" and "Recovery.img". So it doesnt overwrite your current boot.img or recovery.img... Should of been posted last night ( Feb 16 ) when I did this but was busy with my family afterwards.
- Installing the Firmware (Warning: You MUST be S-OFF and Super CID to flash this! Flash at own risk!)
- Reboot to bootloader (adb reboot bootloader if "USB Debugging" is enabled in Android)
- Run: fastboot oem rebootRUU
- Run: fastboot flash zip
- If the output ends with "FAILED (remote: 90 hboot pre-update! please flush image again immediately)", run the previous command AGAIN
- If it ends with "INFO..... OK", reboot to the bootloader: fastboot reboot-bootloader
- Verify everything was successful by running fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.18.0000
(bootloader) version-baseband: 1.35a.32.45.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.18.502.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4147mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d3bfc037
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
- Reboot into Android: fastboot reboot or into recovery: fastboot reboot-recovery
Download:
AT&T 5.18 Firmware MD5 Checksum - 78aa08f90d38c16f1b0a93f508bece8f
Last edited: