[ROM] malata_t8_smba_9701_cm9_3g

remav · Sep 18, 2012

Hi guys,

I have a Neura 3G (1GB RAM) and I updated at 4.0 from Evolio (stock rom). First I did update at CM7 (same from official site of evolio) and from than I have a problem with touchscreen, it's behavior is like an resistive touchscreen, I mean that if I want to scroll a page when I touch the screen and slide with finger, if I don't push hard on screen it take the command like a simple touch and open the file or execute the command what is in area where I touched the screen first time. If I want only to touch for opening something is work nice, no need to push hard.
So this problem was apeared from I made first update at CM7 and persist with ICS. Now I saw that here is a good rom and I want to change with this.
Can anybody to help me with the steps what are need to follow for this? And which rom I need to download? Is need to change the kernel too?

Thank you.

geowolf1000 · Sep 18, 2012

remav said:
Hi guys,

I have a Neura 3G (1GB RAM) and I updated at 4.0 from Evolio (stock rom). First I did update at CM7 (same from official site of evolio) and from than I have a problem with touchscreen, it's behavior is like an resistive touchscreen, I mean that if I want to scroll a page when I touch the screen and slide with finger, if I don't push hard on screen it take the command like a simple touch and open the file or execute the command what is in area where I touched the screen first time. If I want only to touch for opening something is work nice, no need to push hard.
So this problem was apeared from I made first update at CM7 and persist with ICS. Now I saw that here is a good rom and I want to change with this.
Can anybody to help me with the steps what are need to follow for this? And which rom I need to download? Is need to change the kernel too?

Thank you.

Its very important to nvflash the ota firmware From malata obequin has uploaded at first page you can take it from and wipe data and cache
and calibrate screen
After nvflash neuro kernel ics
And flash the update.
If problem exsist post again
I will give instruction how can format emmc

geowolf1000 · Sep 19, 2012

after little hard work first page updated

remav · Sep 25, 2012

geowolf1000 said:
Its very important to nvflash the ota firmware From malata obequin has uploaded at first page you can take it from and wipe data and cache
and calibrate screen
After nvflash neuro kernel ics
And flash the update.
If problem exsist post again
I will give instruction how can format emmc

It's not working, I mean I can't put your ROM. I follow the steps, the Malata ROM is OK, but when I nvflash the CM9 or update zip, after restart it's stuck at Nvidia logo. After Nvidia logo is shown, a small line is flash and after the Nvidia logo start to have a small flicker and stay like this.
Now I put back the 2.2 Froyo from Neura. The touchscreen is normal now, have not the problem what I told in first post.
Any suggestions?
Thanks.

geowolf1000 · Sep 25, 2012

remav said:
It's not working, I mean I can't put your ROM. I follow the steps, the Malata ROM is OK, but when I nvflash the CM9 or update zip, after restart it's stuck at Nvidia logo. After Nvidia logo is shown, a small line is flash and after the Nvidia logo start to have a small flicker and stay like this.
Now I put back the 2.2 Froyo from Neura. The touchscreen is normal now, have not the problem what I told in first post.
Any suggestions?
Thanks.

This nvflash is for malata not neuro
You must nvflash neuro kernel for ics links now are dead but you can grab them
From here http://www.fileshare.ro/72636708378.1
And folow the steps 2 and 3

geowolf1000 · Sep 26, 2012

update 1.4
download from here
http://www.mediafire.com/?cz6x3y9x3lkad6c
changelog
added latest ics browser
added new kernel modules
ntfs support!!!
cifs support
sound improved
wifi improved
fingerprint improved
added latest busybox
added google music player for usb play
apollo removed
compitible with more games ie gameloft

ihave add two txt at attachment files for mount sdcard
you must have a copy of real-fat32.img from nvflash folder to the root of sdcard
open terminal type su
copy paste comands
and reboot

remav · Sep 26, 2012

geowolf1000 said:
This nvflash is for malata not neuro
You must nvflash neuro kernel for ics links now are dead but you can grab them
From here http://www.fileshare.ro/72636708378.1
And folow the steps 2 and 3

Good job geowolf, now it's working. I'll download the new update and install now. Thanks a lot (I pushed the thanks button too).

geowolf1000 · Oct 4, 2012

i had decide that1.4 could be last update
but always released new intersting stuff and i can not reassist them from you
update 1.5
download from here
http://www.mediafire.com/?zwj1tfypabfubss
added new overclocking script
have little heat more but worth to give the push that cores need ....
i attach the results from benchmark
previus was at 1096
we are under nexus 7!and above from other good devices not bad!
added original latest walkman player from sony with you tube tweaks
i change bootanimaion
we are not cm any more...
have fun

kedziu · Oct 8, 2012

in the newest ROM are problems with GSM data.
Modem is able to connect to the network, show signal, operator name etc..
ROM do not see default settings of APN located on the SIM card.
Of course you can add it manually but it not solve problem.

Application "Network Signal Info" shows
Data state: disconnected.

Do anybody has the same problem?

geowolf1000 · Oct 9, 2012

kedziu said:
in the newest ROM are problems with GSM data.
Modem is able to connect to the network, show signal, operator name etc..
ROM do not see default settings of APN located on the SIM card.
Of course you can add it manually but it not solve problem.

Application "Network Signal Info" shows
Data state: disconnected.

Do anybody has the same problem?

You mean at 1.5 or all previus updates?

geowolf1000 · Oct 11, 2012

pimpup edition
download from here
http://www.mediafire.com/?24cymzxexec9kwd
changelog
the most amazing pimp script added
superbassbeats
float touchscreen
wifi and 3g devices support
if 3g doesnt work return to ote and make wipe data cache
first boot takes longer
wifi user turn off data

until now i have not use cpu sleeper
the sleep script seems that working
dont use it until reboot
i added just in case...

I apologize for multiply updates
The most certain bug at cm9 was sleep
The device was reboot and consume battery
We overpass with cpu sleeper but when the device awaked
The cores dint work propebly
That been fix now with new script
The device sleep deep after awake is the same fast
I have obsession with sound because i listen music from my device
i have test all driver that released to xda forum dolby,beats audio,.....
The sound has improoved with new audio policy no lags any more
And superbassbeats work with dsp and walkman player
I sugest to backup your apps and flash it as new rom
Go to ota 20110528 full wipe and flash again
Thanks i hope this will be last before upgrade to jb

remav · Oct 13, 2012

Thanks a lot for your work.
This must be installed like an update over the last ROM or is need to flash it like an new ROM?
I mean if I loose the apps installed.

geowolf1000 · Oct 13, 2012

remav said:
Thanks a lot for your work.
This must be installed like an update over the last ROM or is need to flash it like an new ROM?
I mean if I loose the apps installed.

Go cwm make backup
Go ota wipe
Flash new rom and gapps( dont skip gapps)
Go cwm advance restore and restore data and wipe
Done

kedziu · Oct 15, 2012

For sure, after updates 1.4 and 1.5. Version of my device is 3G 512MB. I am going to reinstall and check again for previous updates.

geowolf1000 said:
You mean at 1.5 or all previus updates?

kedziu said:
in the newest ROM are problems with GSM data.
Modem is able to connect to the network, show signal, operator name etc..
ROM do not see default settings of APN located on the SIM card.
Of course you can add it manually but it not solve problem.

Application "Network Signal Info" shows
Data state: disconnected.

Do anybody has the same problem?

geowolf1000 · Oct 15, 2012

kedziu said:
For sure, after updates 1.4 and 1.5. Version of my device is 3G 512MB. I am going to reinstall and check again for previous updates.

Check last pimpup its very fast and no need cpu sleeper apk
Its smooth and 3g working i have test it since your quote

Sent from my Full Android on Malata a9701

onvi · Oct 18, 2012

geowolf1000 said:
Check last pimpup its very fast and no need cpu sleeper apk
Its smooth and 3g working i have test it since your quote

Sent from my Full Android on Malata a9701

Hi,

Hi have a problem, when flash neuro roma and cwm, at the succesive step i enter in recovery mode(5.5.0.4 cwm) , there is a meu...but not function...there is a message sad "E:cant' mount/chache/recovery/command."

How i can resolve the problem?

thanks for all...

geowolf1000 · Oct 18, 2012

onvi said:
Hi,

Hi have a problem, when flash neuro roma and cwm, at the succesive step i enter in recovery mode(5.5.0.4 cwm) , there is a meu...but not function...there is a message sad "E:cant' mount/chache/recovery/command."

How i can resolve the problem?

thanks for all...

I have post before for this
This is malata kernel
Wipe data factory reset from cwm
If you have neuro model download from here
http://www.fileshare.ro/72636708378.1
This neuro kernel
Wipe data factory reset
And flash pimpup rom

Sent from my Full Android on Malata a9701

onvi · Oct 18, 2012

Thanks,

But i don't Succeed to do wipe data factory reset from cwm...cwm don't function, i flash a malata original rom, after i do wipe and factory, after i falsh neuro rom and cwm.......and i don' succeed to do anyting with recovery mode...only up and down to menu with + and - keys..., i have a malata T8 WCDMA 512mb.
Now i reflash original rom and is ok....but the cmw 5.5.0.4 don't work...and after this i cant do nothing....wipe don't function and a can'tflash the other rom...

Thank for your patience

geowolf1000 · Oct 18, 2012

onvi said:
Thanks,

But i don't Succeed to do wipe data factory reset from cwm...cwm don't function, i flash a malata original rom, after i do wipe and factory, after i falsh neuro rom and cwm.......and i don' succeed to do anyting with recovery mode...only up and down to menu with + and - keys..., i have a malata T8 WCDMA 512mb.
Now i reflash original rom and is ok....but the cmw 5.5.0.4 don't work...and after this i cant do nothing....wipe don't function and a can'tflash the other rom...

Thank for your patience

Did download malata kernel from first page or did you have neuro from romanian page?
You have 512 try to nv flash wifi version
Nvflash / wifi

onvi · Oct 18, 2012

I have download a malata kernel to malata site(works well...i have reflash after a error), i have follow the istruction in irst page:

FIRST DOWNLOAD FROM HERE....OK
UNRAR OK
Copy cm-9 unofficial...and gapps to sd OK
go apx OK
NV FLASH OTA(T8_nvflash_mmc..........) OK
and do wipe data factory reset OK
go apx OK
NV FLASH NEURO KRNEL AN CWM(neuro kernel dowload from your link) OK
GO RECCOVERY CWM 5.5.0.4 and wipe cache Not done....Cwm start in recovery, i see onli a menu...with menu + or - i go down or up to menu, but all choice not function.
There is a message error in white in the down of display sad: E:can't mount/cache/recovery/command.

and stop here...without cmw i do not flash rom and gaps.

I have use wifi batch on neuro rom dowload from your link(there is a recovery cwm 5.5.0.4)....and before i have use a rom from malata site(works well...i have rstore malata whit this).

I do not if I have wrong done...but i have follow istructio line for line..

many tanks

[ROM] malata_t8_smba_9701_cm9_3g

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Similar threads

Top Liked Posts