My phone already has "Build Number 2.17.651.5" , Baseband: 0.97.10.0808
Do I still need to unroot/S-on and flash the firmware update?
If I flashed this ROM without correct firmware, would it brick my phone or would it just not work well?
Thanks
My phone already has "Build Number 2.17.651.5" , Baseband: 0.97.10.0808
Do I still need to unroot/S-on and flash the firmware update?
If I flashed this ROM without correct firmware, would it brick my phone or would it just not work well?
Thanks
Looks like you are running the old radio. Shouldn't hurt anything but the current baseband is 1.06. You're on .97.
Mike
Sent from my PG86100 using xda premium
Hey guys, tell me that this can not be confusing. This is from one of the motorola razr threads. And it is no wonder I still have yet to root my razr.
What do these actually do?
[*]Restore Droid RAZR to 6.12.173 (Fastboot Restore. RSD Lite alternative. Must be in AP Fastboot Mode to do this))
[*]Droid Root for 2.3.6 (motofail) (Roots 2.3.6 and below for Motorola Droids. Have USB Debugging enabled to do this. )
[*]Unroot (Must be rooted to do this. Have USB Debugging enabled to do this.)
[*]Install Voodoo's OTA Rootkeeper App (Use this app to stay rooted after an OTA. Have USB Debugging enabled to do this.)
[*]Install Bootstrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Do not install this AND Safestrap. Pick one.
[*]Install Safestrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Can essentially dual boot. NOT RECOMMENDED FOR NEW USERS. Do not install this AND Bootstrap. Pick one.
[*]Overclock Install (See coryjohn's guide on Overclocking. Have USB Debugging enabled to do this.)
[*]System Pull (This is NOT a recovery program or backup program. This is for devs and power users. Have USB Debugging enabled to do this.)
[*]Droid RAZR Root for ICS 4.0.3 (The GSM ICS leak can be rooted with this. Our ICS may also be.)
[*]Boot into Fastboot from Debugging (Exactly what it says. Have USB Debugging enabled to do this.)
[*]Boot Normally from Fastboot (If you are in Fastboot mode you can use this to boot normally)
[*]Boot into Motorola Recovery from Fastboot (Read above. Exactly what it says it what it does.)
[*]Boot into Motorola Recovery from Debugging (Have USB Debugging enabled to do this.)
[*]ADB Shell (A way to more manually control your phone. For power users and devs. Have USB Debugging enabled to do this.)
[*]Wipe Data/Cache (Be in AP Fastboot mode to do this. Wipes your data and cache.)
[*]Attempt Bootloader Unlock (Just for fun. Will Not work!) (Exactly as it says)
[*]Reboot Phone (Have USB Debugging enabled to do this.)
"All Throttle-No Bottle"
Not much difference in the sound, I never really had any luck with DSP, or Volume plus, the only thing that helped increase the volume was when I was on the Sony Xpera ROM, whatever he did for a sound tweak was great, someone mentioned they flashed the Sony Bravia Engine
Hey guys, tell me that this can not be confusing. This is from one of the motorola razr threads. And it is no wonder I still have yet to root my razr.
What do these actually do?
[*]Restore Droid RAZR to 6.12.173 (Fastboot Restore. RSD Lite alternative. Must be in AP Fastboot Mode to do this))
[*]Droid Root for 2.3.6 (motofail) (Roots 2.3.6 and below for Motorola Droids. Have USB Debugging enabled to do this. )
[*]Unroot (Must be rooted to do this. Have USB Debugging enabled to do this.)
[*]Install Voodoo's OTA Rootkeeper App (Use this app to stay rooted after an OTA. Have USB Debugging enabled to do this.)
[*]Install Bootstrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Do not install this AND Safestrap. Pick one.
[*]Install Safestrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Can essentially dual boot. NOT RECOMMENDED FOR NEW USERS. Do not install this AND Bootstrap. Pick one.
[*]Overclock Install (See coryjohn's guide on Overclocking. Have USB Debugging enabled to do this.)
[*]System Pull (This is NOT a recovery program or backup program. This is for devs and power users. Have USB Debugging enabled to do this.)
[*]Droid RAZR Root for ICS 4.0.3 (The GSM ICS leak can be rooted with this. Our ICS may also be.)
[*]Boot into Fastboot from Debugging (Exactly what it says. Have USB Debugging enabled to do this.)
[*]Boot Normally from Fastboot (If you are in Fastboot mode you can use this to boot normally)
[*]Boot into Motorola Recovery from Fastboot (Read above. Exactly what it says it what it does.)
[*]Boot into Motorola Recovery from Debugging (Have USB Debugging enabled to do this.)
[*]ADB Shell (A way to more manually control your phone. For power users and devs. Have USB Debugging enabled to do this.)
[*]Wipe Data/Cache (Be in AP Fastboot mode to do this. Wipes your data and cache.)
[*]Attempt Bootloader Unlock (Just for fun. Will Not work!) (Exactly as it says)
[*]Reboot Phone (Have USB Debugging enabled to do this.)
"All Throttle-No Bottle"
Huh? Wow. They left out the part where you click your heels together three times and say there's no place like home.
Sent from my Clean and MeanROM 3D
http://dev-host.org/57THere are the installation instructions in case you haven't installed one before... Click Here
Hey guys, tell me that this can not be confusing. This is from one of the motorola razr threads. And it is no wonder I still have yet to root my razr.
What do these actually do?
[*]Restore Droid RAZR to 6.12.173 (Fastboot Restore. RSD Lite alternative. Must be in AP Fastboot Mode to do this))
[*]Droid Root for 2.3.6 (motofail) (Roots 2.3.6 and below for Motorola Droids. Have USB Debugging enabled to do this. )
[*]Unroot (Must be rooted to do this. Have USB Debugging enabled to do this.)
[*]Install Voodoo's OTA Rootkeeper App (Use this app to stay rooted after an OTA. Have USB Debugging enabled to do this.)
[*]Install Bootstrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Do not install this AND Safestrap. Pick one.
[*]Install Safestrap Recovery App (Use this to make nandroid backups and flash Roms, themes, or mods. Have USB Debugging enabled to do this. Can essentially dual boot. NOT RECOMMENDED FOR NEW USERS. Do not install this AND Bootstrap. Pick one.
[*]Overclock Install (See coryjohn's guide on Overclocking. Have USB Debugging enabled to do this.)
[*]System Pull (This is NOT a recovery program or backup program. This is for devs and power users. Have USB Debugging enabled to do this.)
[*]Droid RAZR Root for ICS 4.0.3 (The GSM ICS leak can be rooted with this. Our ICS may also be.)
[*]Boot into Fastboot from Debugging (Exactly what it says. Have USB Debugging enabled to do this.)
[*]Boot Normally from Fastboot (If you are in Fastboot mode you can use this to boot normally)
[*]Boot into Motorola Recovery from Fastboot (Read above. Exactly what it says it what it does.)
[*]Boot into Motorola Recovery from Debugging (Have USB Debugging enabled to do this.)
[*]ADB Shell (A way to more manually control your phone. For power users and devs. Have USB Debugging enabled to do this.)
[*]Wipe Data/Cache (Be in AP Fastboot mode to do this. Wipes your data and cache.)
[*]Attempt Bootloader Unlock (Just for fun. Will Not work!) (Exactly as it says)
[*]Reboot Phone (Have USB Debugging enabled to do this.)
"All Throttle-No Bottle"
I noticed that if you check bass boost above, it lowers the volume.
If you follow these instructions, does that mean that you can take any image and name it PG86IMG.zip and flash it???
Thanks
That's true. I think it lowers all bands except bass which makes the majority of the sound quieter. You could always boost bass by just dragging up the leftmost bar on the equalizer. They're all set at 5.0 in MeanROM 1.2. If you drag the left one up to say 7.0, you should get a nice bass boost.
Mike
This is going to be rather long, but Mike has asked for everyone's feedback and I'd like to speak my full piece..