The touchscreen firmware is separate from HBOOT but they were both "upgraded" by those JB OTA's so HBOOT version was used an indicator of touchscreen firmware version.
[HBoot Mod] Remove red text from splash screen, Remove Tampered Text!
- Thread starter liamstears
- Start date
-
- Tags
- development
The touchscreen firmware is separate from HBOOT but they were both "upgraded" by those JB OTA's so HBOOT version was used an indicator of touchscreen firmware version.
http://xdaforums.com/showthread.php?p=38304611
[How-To] Downgrade your Touch Panel's firmware (and upgrade back)
↑this is only for folks that took jb ota↑
Nothing to do with Hboot.
[Edit] 2.14 happens to have the touch panel kernel changes
Sent from my HOX w/CM10.1 4.2.2 s-off
Last edited:
http://xdaforums.com/showthread.php?p=38304611
[How-To] Downgrade your Touch Panel's firmware (and upgrade back)
↑this is only for folks that took jb ota↑
Nothing to do with Hboot.
[Edit] 2.14 happens to have the touch panel kernel changes
Sent from my HOX w/CM10.1 4.2.2 s-off
Ok thank you, so HBOOT 2.14 wouldn't cause issues I suppose but is there any benefits for it? I am sticking with ViperXL and am on 1.09 HBOOT, Do you recommend just sticking with 1.09?
Yes 2.14 would cause touch screen issues with aosp cause of the firmware that came with the ota update. If you are originally 1.09 no worries about any changing Hboot. And YES I personally would stick with 1.09 as that's what I have and don't want to have to fastboot flash boot.IMG to change ROMs.
Sent from my HOX w/CM10.1 4.2.2 s-off
Yes 2.14 would cause touch screen issues with aosp cause of the firmware that came with the ota update. If you are originally 1.09 no worries about any changing Hboot. And YES I personally would stick with 1.09 as that's what I have and don't want to have to fastboot flash boot.IMG to change ROMs.
Sent from my HOX w/CM10.1 4.2.2 s-off
Ok thanks I will just stick with that, I did have 1.14 but I ran the RUU and removed tampered text, then made a custom 1.09 with removed dev text and updated build date lol
Good to know. Fortunately, I used the very original RUU: PJ83IMG_Evita_UL_Rogers_WWE_1.73.631.1_Radio_0.16a.32.09.06_10.81.32.14L_release_254934_signed.zip
And now I am officially S-Off with no tampered/red text, and LOCKED status on AOKP 4.2.2.
Now I just have to figure out if it's worth flashing a new radio like 3.17...
LOCKED status? you just changed it to say LOCKED? or are you actually RELOCKED? with S-OFF we don't need the bootloader unlock anymore? or is that not what you meant.
He could've just made it say *** LOCKED *** like i did using the program mentioned in the OP.
Oh, I was just confused to what CWolfCW meant, I know you can change it to anything you want but thought CWolfCW meant true LOCKED, not just pretending to be lol
Heh the recent mods released have made my phone simply awesome. Maybe I don't need the HTC one after all.
Sent from Xparent Red using my Venomized Evita
What would that do for us? Very curious.
Sent from my HTC One X using xda app-developers app
Allow us access to more fastboot commands such as being able to flash radios from cmd prompt. Not a big deal for the average user
Sent from my VENOMized HoxL
Awesome:laugh: job - I followed the process for removing the red writing. Worked well and I customised. Then I thought why not do the lot. Followed your process - Slowest part was downloading the RUU. So when that was happening I went through the HTCDev unlock and downloaded TWRP.
Then when all downloaded the process took about 20 mins. Great job Thx :laugh:
As I mentioned earlier I've used it with the plugin that Liamstears made to make a 'stealth' bootloader
Similar threads
- Poll
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
135Remove Tampered Text!
S-Off required
This is quite a lengthy process but this will remove the tampered text competely and not leave just a blank space at the top, you will need adb, fastboot, 2.20 RUU, recovery img and your Unlock_code.bin, so here goes:
First of all do a FULL backup in recovery (your phone will be wiped so dont miss doing this!)
While your phone is doing that heave over here to download the 2.20 RUU: http://xdaforums.com/showthread.php?t=1814217
When backup has completely reboot into fastboot
do: fastboot oem lock
Reboot into Bootloader
Run the RUU downloaded earlier
When it has finished do: fastboot flash unlocktoken Unlock_code.bin (Dont panic if this fails, it failed for me all you need to do is go to HTCDev and unlock bootloader following the instructions)
When that has completed go back into fastboot and flash your recovery back: fastboot flash recovery twrp.img (twrp.img or whatever img your recovery is called)
Once done enter recovery and restore the backup you made earlier
After this you are all done for the main part but remember you flashed an RUU so everything an RUU flashes needs to be flashed back to what you want, this means reflash the HBoot, Splash image, radio and anything else that the RUU changes that you want to be different from the RUU
Done! Enjoy no tampered text in Bootloader
For those that want a quick easy flash with only red text removed please scroll down
For One XL/Evita Only! Hboot only will be flashed. S-Off is required. This can be flashed on any HBoot and can be used to easily downgrade hboot.
Can anyone work out what causes the loading bar to show or disappear?
New method, customize your HBoot!
Please note this method is currently untested (although I have hex compared the before and after hboots and all the changes seem 100% fine)
I have made plug-ins for RegawMOD Bootloader Customizer
RegawMOD Bootloader Customizer allows you to remove the red text or change it to something else, change s-off text to s-on, change the build date/time and change the *** Unlocked *** text
Download the main app from here: http://xdaforums.com/showthread.php?t=1786498
Then download the plug-ins from here: http://xdaforums.com/showpost.php?p=38216901&postcount=89
Choose the plug-in dependant on what version of hboot you want
Place the plug-in and RegawMOD Bootloader Customizer exe in the same directory and open the exe. Choose your options and create a zip and place that zip in your adb folder
boot into bootloader and enter fastboot mode.
do:
fastboot oem rebootRUU
fastboot flash zip PJ83IMG.zip (Or whatever you called the zip when you saved it)
fastboot reboot
Quick simple flash that only removes red text:
Here it is for anyone that wants it:
HBoot 1.09: http://d-h.st/bt9
HBoot 1.14: http://d-h.st/pZ1
HBoot 2.14: http://d-h.st/J1T
HBoot 2.15: http://d-h.st/toS (Thanks to exad)
HBoot 2.18: http://d-h.st/Tnu
Make sure you have fastboot and adb installed
Place downloaded file in same directory as fastboot and adb is installed
boot into bootloader and enter fastboot mode.
do:
fastboot oem rebootRUU
fastboot flash zip RemoveText-1.09.zip (for 2.14 version RemoveText-2.14.zip)
fastboot reboot
This simply mods the hboot to remove the red text
Some people report issues with erase cache command, if you have the problem to fix simply go into recovery and wipe cache
This has been flashed and confirmed 100% working but as always we need a disclaimer:
I can not be held responsible for this zip please flash at your own risk!!11Since we ripped the new 2.15 hboot from the European OTA, I thought I would create a no red text splash hboot for those who just want to remove the red splash, and a plugin for those who want to add some swag to their bootloader screen.
I have already tested it myself.
No red text hboot: http://d-h.st/toS
Plugin: http://d-h.st/4pR77
To those that want it I have added the 2.18 HBoot with red text removed in the first post7
