Guide to Unrooting and S-ON’ing the HTC Wildfire to fix errors [170] / [171]
Hi everyone,
This is a guide I made through my experience of Unrooting and S-ON'ing the HTC Wildfire. This also works for people who have tried multiple times and still have the ERROR [170] or ERROR [171] USB CONNECTION ERROR. I had this error and used these steps to fix it.
*** I do not take any responsibility if your phone fries or explodes during the process. No, seriously I don't take any responsibility if your phone gets bricked. This worked for many people, including me ***
1. Uninstall Android SDK from Control Panel (Start>Programs>Uninstall a Program).
2. Uninstall hacked HBOOT drivers (Start>Device Manager – Right Click on the driver and click “Uninstall”
3. Uninstall HTC Sync and all drivers that came with it.
4. Download CCleaner here.
5. Run CCleaner and do a full scan.
6. Do a full registry scan after backing up the registry.
7. Re-install HTC Sync.
8. Reboot your computer. (Do not skip this step)
9. Connect your phone to the computer via “Charge Only”.
10. Disconnect from the internet so that Windows Update won’t try and install the driver software all over again.
11. Enable USB Debugging on your phone (Settings>Applications>Development>USB Debugging).
12. Start the RUU and go through the steps. The device should reboot and come up with the HTC logo and a progress bar until its completion.
Your phone has only now restored to the stock ROM and has been unrooted. The device still has the bootloader unlocked. In the next steps we will restore the phone back to an S-ON state. This is for people who used to have HBOOT 1.01.001. If you had 1.01.002, you should restore from a pre-rooted nandroid Backup
1. Download the "fastboot" files below
.
2. Extract the zip to C:\fastboot.
3. Click Start and type "cmd" and then enter (obviously)
4. In cmd type cd\ (backward slash after cd, not forward slash)
5. Type cd fastboot. You should now be in the directory C:\fastboot
6. Type the following into cmd:
C:\fastboot>fastboot oem mb 9C068490 1 30
and then enter.
It should say:
...OKAY
7. Then type
C:\fastboot>fastboot flash hboot hboot_buzz_7225_1.01.0001.nb0
and then enter.
It should say:
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... OKAY
8. Reboot into the bootloader. It should say BUZZ PVT SHIP S-ON and the HBOOT version should be 1.01.001.
You have successfully reverted your phone back to stock settings and the stock ROM!
Thanks to the following people:
- DeCex for making the tutorial " S-ON again after AlphaRevx instructions" - it helped me alot
- Vinsanity93 on the Android Forums for making the thread "RUU error 170 & 171 solution for Windows 7"
Attachments
Last edited: