Originally Posted by Be6i4

Watch this video:

http://forum.xda-developers.com/show....php?t=1633243

which video?

nice post
appreciated

mee too

---

Originally Posted by ralf230308

Doesn't work on HD2 T8585..,
Phone just stuck on splash screen / HTC logo

yes , mee too
Plesase give me another way to solve this problem

I get an error after flashing any WP ROM to the phone , Error : 123FATAL HIT 3

can somone help?

Re: [FIX] Fix "bricked" HD2\Leo; 1e FATAL HIT

---

Sorry for the late response. Not sure why you aren't able to get it to work. I would suggest reading through the first page again and making sure you didnt skip any steps.

Sent from my Galaxy Nexus using xda app-developers app

Re: [FIX] Fix "bricked" HD2\Leo; 1e FATAL HIT

---

This is the only way I know of. I suggest reading the first page again.

Sent from my Galaxy Nexus using xda app-developers app

Re: [FIX] Fix "bricked" HD2\Leo; 1e FATAL HIT

---

Originally Posted by ralf230308

Doesn't work on HD2 T8585..,
Phone just stuck on splash screen / HTC logo

Sorry for the late response. Not sure why you aren't able to get it to work. I would suggest reading through the first page again and making sure you didnt skip any steps.

Sent from my Galaxy Nexus using xda app-developers app

Re: [FIX] Fix "bricked" HD2\Leo; 1e FATAL HIT

---

Originally Posted by surya467

I get an error after flashing any WP ROM to the phone , Error : 123FATAL HIT 3

can somone help?

You obviously did not read the post. Go back through it and I'm sure you'll successfully fix your phone.

Sent from my Galaxy Nexus using xda app-developers app

Try the simple stuff first

---

I also own an HTC HD2, all I did was hit the yellow reset button on the right of my micro SD slot and boom that baby was back in business.

Before you go trying to flash and boot other software, just try resetting or turning your device and off. Simple, but sometimes it works.

Although, it might be smart to save some money just in case nothing works and go the legit route.

Originally Posted by nikhil711

So I hope this helps those that have a "bricked" HD2. Two weeks ago I had the dreaded "1e Fatal Hit" error. No matter what I did I could not get it back into working state. Here are the steps I took:

1) Flashed Task29
2) Reflashed HSPL 2.08
3) Flashed Radio 2.15
4) Flashed MAGLDR
5) Flashed latest Recovery

I did those steps multiple times, and at times using Task29 a couple of times in a row, and still would get the "1e Fatal Hit" error. Then I:

1) Flashed Task29
2) Flashed a STOCK ROM using both the SD card and Windows method (mine is a TMOUS HD2 so I flashed the appropriate ROM for it)

And still, the phone would stick on the "Sticking Together" splash screen.

Finally this is what I figured out. There is a small yellow button below the microSD card slot that is a reset button. So this is what I did:

1) Flashed Task29

2) Flashed a STOCK ROM for the HD2 (remember has to be a ROM meant for your version of the HD2/Leo). I flashed via the SD card method. Flashing via Windows might work as well.

3) After it finishes flashing, turn the phone off. Grab a paperclip or toothpick. Turn on the phone as you push the reset button in. The phone should turn on and show the splash screen, then turn off, then turn back on again. I let the phone do this two or three times before releasing. After a period of slience for 20 seconds, the phone finally booted into WinMo 6.5's startup screen.

I was then able to flash with Task29, then HSPL, then Radio, then MAGLDR, then Recovery. And the first test was booting into Recovery which finally worked, then tested with a ROM backup.

Anyways hope this helps those pulling their hair out trying to figure this out.

1E Fatal

---

I completed all of the steps but while holding in the reset button for 30 or more seconds the phone never shut off and on like yours. When I get to the AD Recovery it starts and gives me the 1E fatal error again