[ROM][4.2.2][NIGHTLIES] CyanogenMod 10.1 for HTC One XL

Search This thread

Munoz.ca

Member
May 9, 2012
48
4
Dallas, TX
CM Stable 10.1.3

How is the camera on this stable build? I am thinking of rooting my One X but I would like to make sure that my camera still works like it does now.

Thanks
 

QQNoob

Senior Member
Jul 5, 2012
89
27
USB host mode works with an OTG cable on CM 10.1-20130520-Unofficial. I can use a keyboard or mouse (but not both at the same time.) The new 10.1.3 build is also Android 4.2.2, but I can no longer use a USB mouse or keyboard.

I also tried a nightly of CM 10.2 and it doesn't support USB devices either.

A USB mouse and keyboard both work fine (at the same time, even) on my Nexus 10 running stock Android 4.3.

What happened to this feature in CM?
 
  • Like
Reactions: sandys1

cmccollough

Senior Member
Nov 16, 2010
90
4
I'm having trouble sending picture messages. Mms group messages go through fine and I can usually receive pictures but sending them is unsuccessful. Any ideas?
 

Heisenberg

Retired Forum Moderator
Jun 29, 2011
27,180
18,633
Knocking on your door
OnePlus 9 Pro
I'm having trouble sending picture messages. Mms group messages go through fine and I can usually receive pictures but sending them is unsuccessful. Any ideas?

Check your APN settings, I can almost guarantee that's what your problem is.

Also, in future please direct all questions and non-development talk to the cm10.1 q&a thread. This thread is reserved for development discussion only.

Sent from my Evita
 

aaron.a

Senior Member
Dec 24, 2010
646
98
If disable root (10.2) superuser menu item disappears. No dev options so cannot reenable. On tablet ROM can reenable through dev options but still no su menu item.

Known issue?

What happened to our 10.2 thread?

OOF!
 

Heisenberg

Retired Forum Moderator
Jun 29, 2011
27,180
18,633
Knocking on your door
OnePlus 9 Pro
You could enable root again by installing Superuser or SuperSU via recovery maybe.

The cm10.2 thread has now become the cm11 thread. Is there a particular reason you're not running a 4.4 ROM yet? Only reason I ask is because older ROMs aren't generally supported as much.

Sent from my Evita
 
  • Like
Reactions: aaron.a

aaron.a

Senior Member
Dec 24, 2010
646
98
I'm very particular about flashing my recovery. One might say paranoid.

What is selinux and why do I need it? Not linked in OP official twrp w/selinux, equals 'spicious. =/

I don't wanna be part of the Onex botnet. XD

Am I making sense?

Sent from my One X using Tapatalk
 

TonyStark R.I.P.

Retired Moderator - R.I.P.
May 20, 2008
11,217
10,878
Malibu Point
Q&A thread has been updated. Please use this for all question. This thread is dor development of CM 10 that do not pertain to development.

flashing-arrow_1__1_.gif
[Q&A][CM 10.1][4.2.2] CyanogenMod 10.1 Questions and Help thread

Thank you
 
  • Like
Reactions: llambkin

Top Liked Posts

  • There are no posts matching your filters.
  • 188
    CyanogenMod 10 is a free, community built distribution of Android 4.2.2 (Jelly Bean) which greatly extends the capabilities of your phone.

    This is the official Nightly Build of CM10.1 for the AT&T HTC One X / HTC One XL.

    To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!
    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    Installation Instructions (These are all required)
    1. S-Off your device (Do this before RUU'ing and it will not wipe your /sdcard)
    2. Update to 3.18 RUU
    3. Flash a custom recovery (TWRP/CWM)
    4. Download latest Nightly
    5. Download and flash GAPPS

    Nightlies return! Keep an eye on http://get.cm/?device=evita

    List all Questions and Off-Topic discussions here

    Changelog

    Huge thanks:
    intervigil, xkonni, toastcfh, deck and rohan32 - Great team to work with for the HTC MSM8960 device family.
    98
    @h8rift please check PM

    Thread has been cleaned out. While I realize Development has slowed, I have created an OT thread in the General section HERE For all to decompress ;)


    Lets try to stick with CM talk here.

    Thank you

    Thanks Tony, and sorry for the very late reply to your PM. You did what I would have asked :).

    Development is still going on for this device, but we're trying to work on m7 (HTC One) and this family and get them merged so they always stay up to date with eachother. Its a fun, but daunting task...so please bear with me :). Once we get this kernel cleaned up it *does* have working HDMI and no refresh lines too. So basically, it will be near perfect and solid for this device. Just need some time as alot of us have had work stuff, personal stuff, (and myself) medical stuff going on.

    We still love our S4 8960 devices, so they aren't forgotten :). We're learning alot about things we can fix here from what we are learning about the m7, so its a great experience for us and for you, the user. So kick back and relax and I will definitely put a noticable post up when nightlies return to normal and we move on to the other kernel which drops the lib that got us DMCA'ed.

    Thanks everyone,
    -h8
    89
    I believe everyone is correct and a status update is required at this point. This was my first CM device to maintain and I have a deep love and respect for it.

    We just merged up our 3.4 stuff to CyanogenMod and each of the four devices in the family have a few leftover issues before we start nightlies again.

    Here's the scoop on our phone on 3.4 at this moment:

    All features work except:
    *720p/1080p video
    *random reboots
    *increased battery drain over 3.0 kernel as it is not optimized or has a stale process chewing battery. Its nothing catastrophic, but noticeable.

    Issue-by-issue:
    #1: this is broken on all four devices at the moment and as all of you remember from cm9, cm10, cm-10.1 w/3.0 kernel....we do camera last. Stability first, features second, polish third.

    #2 I bricked my Evita while fixing this issue so it could be released in an alpha status to you all. Luckily, XsMagical has been very very kind and offered to donate me a new motherboard ($150) to revive my device. It should be in the mail coming my way on Monday. We believe we found the fix, I just need to validate.

    #3 this issue will be addressed after reboots and camera are up. Hell it could be the camera or reboots causing it. That's why we polish last.

    **Sidenote: in 6-8 months I will most likely get whatever new htc device is out there and maintain it too if its on at&t. Why? Because our 4 (now 6) man squad are all CM has for HTC development officially. Period. There's nearly 10 people on the GS3 and GS4 series of phones just by themselves. No one wants or loves htc devices more than us so damn right I will do my hardest to maintain as much and as many as I can. Every new device I encounter the mire I learn how to fix up the others. We figured out HDMI out for this device by working on the HTC One, for example. We are also looking at merging kernels so that yes, thus device will be continually carried through new versions of android as well as the newer devices.

    Some Evita users moved to the HTC One already and I was already there having their back. I would feel more appreciative that you get an easy-going, hard working person like me to give up all this time to work on devices knowing dang well that if you upgrade to another AT&T HTC device, you can expect me along with it. I feel I am dependable and actually listen to complaints, kudos, and feedback and respond appropriately, while other developers might not really care to respond to anything. My PM box fills up daily with questions and queries about how to build android from source for random devices like Huawei, or older devices like the HTC Flyer tablet. I literally work 45 hours a week at work, then put in another 5 hours minimum every night (or 10-15 on weekends). If you have been wondering what I have done with my 25 hours on android this week it has been trying to find a way to un-brick my Evita before that motherboard arrives so I can get to work this weekend. Rohan has been helping out a lot since my device died but he is very busy at the moment.

    Last but not least. As soon as I can confirm the random reboots every 5-10 minutes are gone and it is a stable phone (I'm talking voice and data, because phone call availability is #1 priority...I mean...its a phone for crying out loud...), I will be blowing this thread up with test builds to see if we catch other bugs.

    But I would rather see you on a stable build from March than an unstable build today and something happens to a family member and you don't get the phone call. Or maybe you get hurt badly and your phone reboots in mid-dial.

    That's what I think about. That's why there are no test builds yet. Be patient, I want to see everyone excited again once this is released again. Lord knows I could use a few hours break by having all the devices on nightlies so I can work out bugs!

    Sorry for the length, but that's what's on my mind after I read the last few posts so I wanted you to know *everything* that is going on.

    Thanks,
    -h8





    Sent from my One using xda app-developers app
    81
    Little update for you guys, the remaining issues are almost done for the 3.4 kernel. the permanent black screen unless USB is plugged in is gone now. We are now dealing with a screen on / off delay of a half a second and getting camera working again :).

    Sit tight, eat some popcorn, you will enjoy the update when its available (then nightlies will start up again shortly after, bc we wont need the file that got us DMCA'ed). This also sets us up for quick updates to the next version of android since we're mostly CAF, with minor HTC bits needed to run the vendor-specific hardware.
    77
    H8 is never late, nor is he early. He arrives precisely when he means to.

    Sent from my One X using xda app-developers app

    We're making major headway on our 3.4 kernel. No tearing and such, super smooth. Only problem right now is Camera, screen on/off delay, and if you dont have a USB cable plugged in, after about 10-15 seconds, the screen will not turn back on until you plug a usb cable back in. Otherwise its pretty much fully CAF code :).

    Sorry haven't been around, we took a break for about a week, we'll still waiting on our vendor repo to come back. That break did us well, we're making major progress now.

    There is no "giving up", its just "how long will it take". We are going to miss M3 but are trying to be ready for cm-10.1 stable. We'll just have to see.

    Thanks guys!
    -h8rift