Never had to do that before hence the question-how,which one(will I lose anything).
Thanks in advance.
Back up your SD, format, put your stuff back, and you are good to go
Sent from my SGH-T889 using xda app-developers app
ok, I'm assuming it's the external one? You format in recovery?
ok, I'm assuming it's the external one? You format in recovery?
Thanks. Seems ok now. That probably had an effect on my battery with this version (an last), checking sd card and generating notifications every couple of seconds.
Format SD to fat32
Sent from my SGH-T889 using xda app-developers app
Im always have this problem whit your kernels ptmr3. The frecuens always up and not got down always at 1.5 and 1.6. Look.
Sent from my SGH-T889 using Tapatalk 2
This is the best at 1.8....... in stock kernel i got 18000. Need to work on this, realy bad numbers and on nenamark 57.2 the best and the lowest i got on stock was 58.0.
Sent from my SGH-T889 using Tapatalk 2
OK you are doing something funky. Your settings more than likely are hindering your performance this is mine at 1.6 with lulzactive gov (not as geared for performance so running lower than it would usually on pegasus)
Sent from my SGH-T889 using xda app-developers app
!!! Haha right on top lol
Sent from my SGH-T889 using xda app-developers app
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release