Froyo Problems....

---

I'm using Froyo bundle by Ritchietos on my GT-B7610:

1. Camera is working temporarily..........Is there any solution for that........

2. SD card and my storage both are not appearing in Froyo.....

3. And how should i apply updates in it because putting in my storage is not working.......

Originally Posted by 7827505059

I'm using Froyo bundle by Ritchietos on my GT-B7610:

1. Camera is working temporarily..........Is there any solution for that........

2. SD card and my storage both are not appearing in Froyo.....

3. And how should i apply updates in it because putting in my storage is not working.......

This guide was meant for i8000, I don't know whether this guide suits b7610 or not.

1. Camera is working fine on i8000.
2. SD card and both My Storage is working fine in this tutorial after using updated V2 froyo bundle.
3. Updates are done through Ubuntu (extract the o2b3update.tar.gz contents and enter commands to copy the files to ext4) or place o2b3update.tar.gz in root of My Storage(Relaunch haret.exe).

Thanks for the guide but I'm a little stuck

I'm trying to run android from the internal 16Gb storage (I have the 16gb Omnia2)

Initialy my 16gb partition was extended with 2 fat32 sub partitions, I wiped the entire thing clean and made 2 primary partitions fat32 12gb and a 4gb ext4. I named the ext4 "android" and extracted the big tar file into it (I used the froyo 2.2 beta 3 one).

Then I copied haret and the startup.txt into the root of the "my storage" folder, modified the startup.txt and ran it.

I get the black screen with the text indicating its loading the kernel i think and then a splash screen that sais "Android loading on omnia II.." and nothing.. It just sits there doing nothing, I left it for 10minutes for good measure and then pulled the battery.

Please what am I doing wrong here? Should the etx4 be the first partition before the fat32 one?

I have not tested with beta 3 yet. Will post the update for beta 3 on the weekend.

Ok so I made a little progress but not a lot.

I downloaded the beta2 package again and used the manual installer to put it on a EXT2 partition thats at the end of the "my storage" internal storage.

I run haret from my storage and get stuck at the pink screen EVERY single time!

I tried mmcblk1p5, mmcblk1p6, mmcblk0p5, mmcblk0p6 and still all I get is the pink screen with nothing happening.
I have the Samsung omnia 2 I8000 and I removed the Micro SD card completely to make sure its not trying to run from that or something.

Is there no way to get some kind of diagnostic on why its not able get past the pink screen?
I tried the beta2 and beta3 tarballs and its the same for both.

I also tried mmcblk0p2 mmcblk1p2 since some ppl said that if you dont use extended partitions and only primary ones this should be the case.
Then I reverted back to the Beta 2 bundle, got the pink screen, and then the words "ANDROID" with a light running thru the letters. I left it like that for about 30minutes and nothing else happened. I'm REALLY annoyed that so many ppl got it working and yet no one can help others.
I don't see why you would even want to install it to the SD card in the first place, why is there so few installers for the "my storage" internal memory?

Help

---

Dear ,

Thank you very much for the tutorial, I've followed u step by step but when I came across shrinking the storage an error message appear every time below the details...

Thank you in advanced


GParted 0.8.1 --enable-libparted-dmraid

Libparted 2.3
Check and repair file system (fat32) on /dev/sdb5 00:00:09 ( ERROR )

calibrate /dev/sdb5 00:00:00 ( SUCCESS )

path: /dev/sdb5
start: 2
end: 16056319
size: 16056318 (7.66 GiB)
check file system on /dev/sdb5 for errors and (if possible) fix them 00:00:02 ( SUCCESS )

dosfsck -a -w -v /dev/sdb5

dosfsck 3.0.9 (31 Jan 2010)
dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN
Checking we can access the last sector of the filesystem
Boot sector contents:
System ID "MSWIN4.1"
Media byte 0xf8 (hard disk)
512 bytes per logical sector
4096 bytes per cluster
36 reserved sectors
First FAT starts at byte 18432 (sector 36)
2 FATs, 32 bit entries
6487040 bytes per FAT (= 12670 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 12992512 (sector 25376)
1620123 data clusters (6636023808 bytes)
63 sectors/track, 255 heads
2 hidden sectors
12986366 sectors total
Reclaiming unconnected clusters.
Checking free cluster summary.
/dev/sdb5: 1 files, 4/1620123 clusters
grow file system to fill the partition 00:00:07 ( ERROR )

using libparted
libparted messages ( INFO )

Error informing the kernel about modifications to partition /dev/sdb5 -- Device or resource busy. This means Linux won't know about any changes you made to /dev/sdb5 until you reboot -- so you shouldn't mount it or use it in any way before rebooting.
Failed to add partition 5 (Device or resource busy)

========================================
Shrink /dev/sdb5 from 7.66 GiB to 6.19 GiB

========================================
Create Logical Partition #1 (ext4, 1.46 GiB) on /dev/sdb

========================================

quick question (sorry if this has been answered before):
my omnia2 has only 2gb internal memory. Is that enough to install android? Or shall i stick with the sd card installation?

CREATE EXT4 PARTITION THROUGH GPARTED
1. Go to Applications> Accesories> Terminal
. . . . . WERE CAN I FIND Applications >Accesories>Terminal..... Im new in Ubuntu . Im using Ubuntu 11.10 Plz Plz help me