will I brick my phone if I flash a wrong recovery image? I still can't root my phone..
Sent from my Transformer using XDA Premium HD app
Sent from my Transformer using XDA Premium HD app
I followed all the steps and when I'm about to flash my ported CWM the red bar went to 100%, but i got an error:
BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all images!
(Hint)
DA paritial images download is ONLY allowed under following prerequisite: 1.All images have been downloaded to target before, and target could boot up: 2.The images layout map on the target is same as the load that is to be downloaded.
Please help
when this error appeared on my end, I just created a new scatter file using MDRT and used that in flashing recovery.img
@Esrom2 your phone wouldnt be bricked. Although u wouldn't be able to enter recovery mode unless u flash the right recovery image meant for your phone.
And y is your phone not rooted?
when this error appeared on my end, I just created a new scatter file using MDRT and used that in flashing recovery.img
http://www.mediafire.com/view/?jq6jz5i9vyr8zwv
I'm trying to root mu phone, and I'm using this tut:
Code:http://www.mediafire.com/view/?jq6jz5i9vyr8zwv
I'm able to upload my boot.img and everything is OK with that boot.img, same size az MTK Tools says and all good. After that I unlocked boot.img in cygwin with plugin for that, and all is good, but boot.img size is smaller than original. Is that OK? After that I can not download that unlocked boot.img with Flash tool to my phone, there's error...
Whats wrong?
Edit:
I tryed with a recovery also, and here's error, same as error for boot.img:
Any help?
After trying again, there's new error:
Can I flash/boot with insecure boot.img with fastboot or something?
so ive downloaded all new versions of the apps..
MTK - 245
SP - V3.1304.0.119
did every thing like in tutorial pdf,,,
but whem uploading the modded TWRP to Phone with SP, i get this error:
Can any one help--please...
Can I try to flash boot.img (is smaller than original, original is 6mb, with ro.secure=0 is about 4,2mb) with that SP Flashtool v4.0?
http://www.4shared.com/file/MTJyOKeu/boot.html
http://www.4shared.com/file/-_FngVH7/unlocked-boot.html
http://www.4shared.com/office/wVCZ2nRN/MT6577_Android_scatter_emmc.html
Sure, just a sec to reboot to Windows and upload boot.img...
Edit:
Here I am, in Windows, hehehhe...so, this is original boot.img downloaded from phone, same size as MTK tools says (I think):
Code:http://www.4shared.com/file/MTJyOKeu/boot.html
, but I'm not sure is it good...
This one is with ro.secure=0, I edit original one in cygwin with plugin for that (thanks to Yuweng, if thats his plugin, I do not know, I'm sorry...):
Code:http://www.4shared.com/file/-_FngVH7/unlocked-boot.html
I'm confused because second boot.img is smaller than original, and the original one is same size as MTK Tools says, in scatter file...
This is scatter file generated with MTK droid tools:
Code:http://www.4shared.com/office/wVCZ2nRN/MT6577_Android_scatter_emmc.html
With V4.0Try SP Flashtool v4.0 Here for flashing too the phone as explained above :good:
With V4.0
Diferent Error...
SP Error:
Recovery Size... Looks normal...
Hi dj_suca,
Some phone's require you to have the battery removed and some need the battery in Again a little bit of trial and error may not go a miss. I have heard of some phone's needing the volume + button to be held in too.
Also a pc reboot may help and try different usb ports.
If no luck try this SP Flashtool SP_Flash_Tool_v3.1224.0.sn85.7z
i understand... but on this model the battery is unremoveble :S
didnt test yeat the vol+ combination with sp tools.. but i will give it a try tonight..
Defo seems like a driver problem namely preloader-usbvcom driver.to check it turn off your phone and take out the bat then plug in the usb cable. Next go to device manager. control panel> hardware & settings> device manager. Now you will have to be really quick watching the list in device manager. Pop in your battery the list will quickly refresh and you should notice "Ports (Com & LPT) " appears & Disappears by "Processors" in mine. under this you should see preloader-usbvcom. if you have a yellow ! mark thats your problem. NOTE: You have to be super quick to catch it and it may take a few goes.
I had to uninstall all drivers then reinstall about 3 times before they set properly.