The play market has a few aps to manually control rotation of both sense services and aps. I forget the one used to use. I'll look and edit this post
Edit:rotation locker. It's free
sent from my evolte courtesy sense5 port.
[ROM] Operation Jelly Bean 3.15.651.16 Build Themed and Inverted
- Thread starter joeyfettucine
- Start date
The play market has a few aps to manually control rotation of both sense services and aps. I forget the one used to use. I'll look and edit this post
Edit:rotation locker. It's free
sent from my evolte courtesy sense5 port.
Thank you, I'll give it a spin! It's just that whenever I come out of an app in landscape mode it does tend to lag a litle bit before hitting the home screen.
If you already have Tasker you can have auto rotation turned off and have profiles that turn it on when you need it on certain apps.
I'm so I'm s-on I know why my tp won't work every time I flash the downgrade zip from the beginning of the post it keeps saying failed, wtf??
Sent from my EVO using Tapatalk 4 Beta
Sent from my EVO using Tapatalk 4 Beta
None that's worth releasing. I tested it for a week and there was just too much to do. Then all of the sudden 3.16 base was dropped and everything changed again. I think everyone is waiting on a sense 5 ota to start building again.
sent from my evolte courtesy sense5 port.
Well yes and no does it exist yes.... Will we post it? No.... Sorry we are very proud of our work and we will not post something we wouldn't use ourselves.
I don't know that it is going to be updated. I think joey has gotten or is getting the one and so is pneuma.
Sent from my EVO using Tapatalk 4 Beta
Oh okay well good thing that this rom is as stable as it is i will just wait until I get my upgrade which is awhile but it's not broken so I can deal with a few little problems that I have with it and I will be for sure getting another rom from him
Sent from my EVO using xda app-developers app
Sent from my EVO using xda app-developers app
Just felt like stirring the pot. Missing this Rom! Wish it had been updated. 
Sent from an (mod edit) infected EVO taking a digital bath
Sent from an (mod edit) infected EVO taking a digital bath
This was probably the best Sense ROM I ran. Fast as all hell with Arc Reactor and battery life that I haven't been able to match since.
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
45
Pneuma
joeyfettucine
ssojyeti
Fredgar
Darealboot
xsisbest
3.15.651.16 base Ruu For the Evo LTE
Android 4.1.1
Sense 4+
Extended Quick Settings+txt%- Settings/display&gesture/extendedquicksettings
Init added
Modified Advanced Power Menu
Themed Rom Completely
Inverted Google Apps
Cenverted Clock and removal of Battery in the UI it can always be added back
Converted the UI into a JB look along with the dialer, Mms, Lockscreen and widgets are all jelly bean styled
Jelly Bean and Ice Cream Sandwich Analog clocks are built into fusion
The rom is inverted and there are so many edits I cant even explain them all
Old Man Jenkinz Rom pack is in there
Screenshot remap
Mms Over wifi
MMS Compression
Increased haptic feedback
Accurate 1x/3g
Removed all the Tell HTC crap and firmware update
Acid Audio Mod with XLoud
Security checks disabled
Longpress back to kill
Longpress volume to skip tracks
USB notification removed
ADB persist
Trans pulldown and app drawer
and more, I'm sure
This project started as a result of Pneuma and Joey wanting to make a rom that has an AOSP look but retains the response timing of Sense. Our goals were, but not limited to, changing all main stage apps so they would look and act more like their jelly bean counterparts. The Project obviously started on ICS but it has followed over to jelly bean with this rom. This is pure sense and there are no google apks involved aside from those that come stock. We will be re-basing it as soon as possible with the new update... Enjoy
Clock overlap fix in post 2
Text size not editable in Settings
You tell us!
RLS1-S-Off OC'd to 1.7ghz with Elementalx
md5: f405783b6d82071e88cdb916986ff991
RLS1-S-On and off for TWRP 2.3+ & 2.4+ OC'd to 1.7ghz with Elementalx
md5: 29b7f70581b6f73139fbbd66148527ec
RLS1 S-On and of with No OC for TWRP 2.3+ and 2.4+
md5: 65876f27e95d34a7f9ea21f7e1042301
More mods, themes, and tweaks
Steal25
chogardjr
eg1122 and the Badseeds
one_love_420
Team ACID
IBotPeaches
mikeyxda
nick1313
justin860
TUN_SD
rujelus22
xHausx
and more I'm sure. If you are not named and should be, please PM and you'll be added.
13Install instruction using an excerpt from mikeyxda meanbean, because it is so beautifully written....
s-off installation
- Always make a Nandroid backup before installing anything on your phone!
- On first install of, do a full wipe (at least a factory reset)
- Subsequent updates: no wiping necessary BUT...
- If you have any trouble at all, do a full wipe and then reinstall
- Install using TWRP recovery (again, s-off recommended)
- After the first boot on a fresh install, go to "Menu", "Settings", "Power" and UNcheck "Fast Boot". When you reboot or power off the phone, you really want it to reboot/power-off. This can save you a lot of headaches.
s-on installation
Note that with s-on, TWO things must be flashed separately: the ROM ZIP and the kernel inside that ZIP. The built in kernel installer (thanks Haus) will take care of this without any extra work on your part: just flash with TWRP! Follow the instructions below, however, so you'll know what to expect because there are some pauses and an extra reboot involved whenever the kernel in the ROM is updated.
- Boot to TWRP recovery (hold vol down and press power for 1 second while you continue holding vol down until you see the bootloader, then choose "recovery")
- Always make a Nandroid backup before installing anything on your phone!
- On first install, do a full wipe (at least a factory reset)
- Subsequent updates: no wiping necessary BUT...
- If you have any trouble at all, do a full wipe and then reinstall
- In TWRP recovery, choose "Install" and locate the ROM ZIP you downloaded and begin the install.
- The installation will usually complete relatively quickly but if a new boot.img is included in the ROM, it may take 5 minutes or longer to flash: please be patient!
- When the installation is complete, if you see the word "Look!" in large text, a new boot.img was flashed and you are not done yet! In that case, continue to the next step. If you do NOT see the word "Look!", you can reboot and you are done flashing.
- When the word "Look!" appears, simply "reboot system" normally from recovery. Your phone will begin to boot but will reboot during the boot animation and then boot back to recovery. At that point, simply flash the ROM a second time from recovery to complete the install. This process is required for the s-on installer to do its job. Once you install the ROM a second time and reboot, your phone will boot normally.
- After the first boot on a fresh install, go to "Menu", "Settings", "Power" and UNcheck "Fast Boot". When you reboot or power off the phone, you really want it to reboot/power-off. This can save you a lot of headaches.
s-on additional notes
- If you have a new phone and are starting from scratch, use these instructions to unlock your phone and install TWRP recovery. These instructions work for all current software including the latest 3.16. Follow all steps up through and including step 28, except in step 25, use the latest openrecovery*.img file from here instead of the old 2.1.8 version listed on the page. Once you successfully complete step 28, you can boot to recovery and install MeanBean.
- If you've already unlocked via the HTC method above and you already have TWRP recovery installed, use the above instructions but if you have any trouble, here are instructions on how to manually install the ROM and kernel separately.
- Have trouble after trying to flash s-on: reread the s-on instructions above and be sure to follow each step. If you have done that and still have trouble, try this info.
- Updating your firmware to the 3.16 RUU is another story altogether so I'll leave the firmware/radio updates to other threads.
If your touch panel does not work, you have likely updated the Touch Panel firmware. To downgrade, download 3.15 Touch Panel Firmware and flash in bootloader. Be sure to the thank Captain_Throwback.
Furthermore,
If you dirty flash, expect issues. If you restore apps, be sure you are only restoring data apps you actually use and not apps from other ROMs. We removed several bloat apps due to their effects on battery and performance.
Disclaimer:
Anything you do on your phone is of your own volition. We take no responsibility for bricks, software issues, or federal watch lists.
Preview for the boot animation sound might be slightly off to how its going to sound I might run it through a nifty software in linux that will make it sounds crazy
[URL]http://i1177.photobucket.com/albums/x346/pneuma1985/th_Boot_Animation_Preview.jpg[/URL]
SystemUI Clock Overlay Fix
Note* The statusbar will be blank until a ticker is displayed. If one doesn't apear on its own, just send yourself a text.8
It's okay, I speak jive.
I believe the poster is saying that he enjoys the audio quality he experiences with your ROM. He's not sure if it's your ROM's audio drivers or the fact that he owns a set of Beats by Dr Dre urBeats In-Ear Headphones (which he also greatly enjoys), but he wanted to express his satisfaction with your ROM.
DISCLAIMER: I may be slightly off as my jive is a little rusty (it's been a few years). I believe headphones taking a dump in your ears is a good thing, but I'm not 100% sure on that one.
