[ROM] Evervolv | 3.2.0p1 [AOSP]

Search This thread

preludedrew

Inactive Recognized Developer
Jul 26, 2010
560
1,713
Santan Valley
I apologize for those that had wanted an evervolv rom ages ago and I didn't come through for ya. So here's a jellybean 4.2 rom. It's rough, but definitely something to work with. I'm gonna keep this post short. Read through it for links to releases, nightlies and source.

Right now the current source we are working on is Jellybean (Android 4.2.x).

For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.

Current version: 3.2.0p1

Downloads:

Evervolv releases & nightlies


Below is the "Not working" or items that are buggy list. I'm going to keep it short and simple for the time being and let ya'all figure bugs out, and I will update this.

Items that need attention: (Not working or buggy)

*** Resetting this for v3.2 ***

Wifi

Here's a couple links to keep in mind:

My twitter: @preludedrew

Evervolv Github: https://github.com/Evervolv

Evervolv Gerrit: http://review.evervolv.com/

Evervolv website: http://www.evervolv.com/
(The website has not been updated since our gingerbread builds... I know I know.)

IRC: #evervolv

 
Last edited:

preludedrew

Inactive Recognized Developer
Jul 26, 2010
560
1,713
Santan Valley
Wow will definitely try this. Is wifi really the only thing not working?

sent from vivow using XDAP

No, that's just what is confirmed by me. The device I use to test these builds out is not activated, so data/cell could not work for all I know. This is the first release build I've done for this device, and will need input as to what to fix with Jellybean 4.2.
 
  • Like
Reactions: gtdtm

gtdtm

Senior Member
May 23, 2012
899
263
I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.

---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------

I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.

What the heck, I'll give it a try in the morning. What gapps are we supposed to use?
 

Addiso

Senior Member
Jul 3, 2012
2,014
726
28
San Bernardino
Samsung Galaxy Tab S9 Series
I appreciate any new development, but unfortunately no wifi is a deal breaker. I'll keep my eyes on it for the next version. Thanks for the development.

---------- Post added at 10:27 PM ---------- Previous post was at 10:24 PM ----------



What the heck, I'll give it a try in the morning. What gapps are we supposed to use?

4.2 gapps lol
 
  • Like
Reactions: Rushead

zax10

Senior Member
Nov 8, 2010
985
116
Inman
Downloading now. Will let you know in the am. Screenshots would be nice though.

Sent from my HTC Droid Incredible 2 using xda premium
 

zax10

Senior Member
Nov 8, 2010
985
116
Inman
1st attempt:
Downloaded rom.
Flashes the antivenom since I was coming from viper.
Flashed rom.
Flashed gapps.
Upon boot com.google.processes failed then setup wizard failed.

2nd attempt:
Flashes different gapps for jb.
Same issues as first attempt.

3rd attempt:
Wiped again.
Installed rom.
Did NOT flash gapps.
Rom booted fine.
No data or cellular connection.
Tried to insert APN for Verizon. While searching for apn phone went to sleep.
Could not unlock phone afterwards. Just a blank screen.

The rom did boot so that is a good start. Need to figure out why cellular service is not functioning and why the gapps are failing.
 
Last edited:

rijujeevan

Senior Member
Aug 8, 2012
152
25
Calicut
1st attempt:
Downloaded rom.
Flashes the antivenom since I was coming from viper.
Flashed rom.
Flashed gapps.
Upon boot com.google.processes failed then setup wizard failed.

2nd attempt:
Flashes different gapps for jb.
Same issues as first attempt.

3rd attempt:
Wiped again.
Installed rom.
Did NOT flash gapps.
Rom booted fine.
No data or cellular connection.
Tried to insert APN for Verizon. While searching for apn phone went to sleep.
Could not unlock phone afterwards. Just a blank screen.

The rom did boot so that is a good start. Need to figure out why cellular service is not functioning and why the gapps are failing.

Same here..no signal bars..

Sent from my Incredible 2 using xda app-developers app
 

gtdtm

Senior Member
May 23, 2012
899
263
Not I. If you try it and it works let us know.

Sent from my ADR6350 using xda premium

Will do, if I can ever get the gapps to download over 3g. :(

Edit: Well, it didn't get past the splash screen with Aero's v15 kernel. I may tinker a bit more, but I need my phone to be a phone, so...

---------- Post added at 09:40 AM ---------- Previous post was at 08:52 AM ----------

Okay, after using the kernel failed I tried a normal flash. I was able to boot it and run through setup with gapps installed. I didn't have wifi or verizon data, so it couldn't log me in, so I skipped all that. It seems to run nicely, but there is no built in camera app. If it had data I would have tried a 3rd party. There is a "nightly" released already today, so I wonder if it has any improvements or if the dev is going to have to work on some device specific fixes for the carrier first. I'm definitely willing to keep trying, but I'd like to hear from the dev as to when we might see the data/phone stuff working.

Thanks for bringing it this far.
 
Last edited:

zax10

Senior Member
Nov 8, 2010
985
116
Inman
Will do, if I can ever get the gapps to download over 3g. :(

Edit: Well, it didn't get past the splash screen with Aero's v15 kernel. I may tinker a bit more, but I need my phone to be a phone, so...

---------- Post added at 09:40 AM ---------- Previous post was at 08:52 AM ----------

Okay, after using the kernel failed I tried a normal flash. I was able to boot it and run through setup with gapps installed. I didn't have wifi or verizon data, so it couldn't log me in, so I skipped all that. It seems to run nicely, but there is no built in camera app. If it had data I would have tried a 3rd party. There is a "nightly" released already today, so I wonder if it has any improvements or if the dev is going to have to work on some device specific fixes for the carrier first. I'm definitely willing to keep trying, but I'd like to hear from the dev as to when we might see the data/phone stuff working.

Thanks for bringing it this far.

The ROM looked really nice while I was able to run it. Also to the OP.

On the lock screen the clock is sized wrong. The bottom of the numbers are cut off.

Sent from my ADR6350 using xda premium
 

sjpritch25

Senior Member
Jan 30, 2011
1,249
182
St. Petersburg
Okay,
It boots up fine
no wifi obviously
no data
usb storage didn't work for me
did get com.android error at first boot, but not again.

I'll post some screenshots once i restore back.
 
Last edited:

sjpritch25

Senior Member
Jan 30, 2011
1,249
182
St. Petersburg
Screenshots for those...
 

Attachments

  • Screenshot_2012-12-14-01-37-07.jpg
    Screenshot_2012-12-14-01-37-07.jpg
    56.3 KB · Views: 824
  • Screenshot_2012-12-14-01-37-29.jpg
    Screenshot_2012-12-14-01-37-29.jpg
    27.5 KB · Views: 809

Top Liked Posts

  • There are no posts matching your filters.
  • 32
    I apologize for those that had wanted an evervolv rom ages ago and I didn't come through for ya. So here's a jellybean 4.2 rom. It's rough, but definitely something to work with. I'm gonna keep this post short. Read through it for links to releases, nightlies and source.

    Right now the current source we are working on is Jellybean (Android 4.2.x).

    For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.

    Current version: 3.2.0p1

    Downloads:

    Evervolv releases & nightlies


    Below is the "Not working" or items that are buggy list. I'm going to keep it short and simple for the time being and let ya'all figure bugs out, and I will update this.

    Items that need attention: (Not working or buggy)

    *** Resetting this for v3.2 ***

    Wifi

    Here's a couple links to keep in mind:

    My twitter: @preludedrew

    Evervolv Github: https://github.com/Evervolv

    Evervolv Gerrit: http://review.evervolv.com/

    Evervolv website: http://www.evervolv.com/
    (The website has not been updated since our gingerbread builds... I know I know.)

    IRC: #evervolv

    20
    Has the black screen after the lock screen issue been fixed yet?
    Also I'd like to know why i can't upload pictures to instagram

    Sent from my Incredible 2 using xda app-developers app

    I've begun to ignore your posts. If you can't let me have a life and have some patience with that, then you're issues with the phone are way too important for me to devote my donated time. We're doing this for the fun of it. I don't use this phone, so working on this device has no positive effects on me. The only thing is that I love working on these devices, and I love working with ya'all to get things straightened out. There is always a challenge around the corner, and it's difficult to find 2 people with the same exact issues, which adds to the difficulty and the fun at the same time. I try to monitor xda for any issues ya'all have with the nightlies, I might not reply but it doesnt mean im not looking into the issues. School started up again this week, so i've been busy with a little bit of integration. For everyone else. I'm gonna come up with something for ya'all to help with reporting / debugging bugs with me. For those that can already do it, we're getting into some hardware / kernel related bugs because of the 3.0 kernel integration. The best things are to get a logcat and a dmesg, when the problem occurs. Both may not apply to every situation, but it won't hurt and it's just one extra step to help us help you.

    Thanks
    -Andrew
    16
    elginsk8r merged quite a bit of updates from the vivowct kernel. I was able to reproduce the UI freezing after exiting camera/camcorder before these patches, have not been able to with them. Please report back! Also, we're working on a portion of the Evervolv toolbox to handle nightlies, release and test builds. So might make things a little easier to track. Along with a bug tracker.
    16
    We have a 3.0 kernel booting!

    <6>[ 0.000000] Initializing cgroup subsys cpu
    <5>[ 0.000000] Linux version 3.0.58-ga53dbaf (andrew@localhost) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Sat Mar 2 21:00:09 MST 2013
    <4>[ 0.000000] CPU: ARMv7 Processor [511f00f1] revision 1 (ARMv7), cr=10c53c7d
    <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
    <4>[ 0.000000] Machine: vivow
    12
    Commits that should fix then Phone FC ( occurs when the remote caller hangs up ), and the camera led are on gerrit. I'll most likely be gone this weekend, but will merged them when i get back. As far as the sound and UI freezing / black screen issues, those are next.