Introducing XDA:DevCon – A Conference For Developers By Developers
XDA Developers Android and Mobile Development Forum
Forgot your password?
 
Post Reply+
Tip us?
 
sidechain
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 1
Join Date: Oct 2012
Default Download Mode Problem !!!

Hi everyone... Sorry for my English.

My phone was ICS updating later hard brick,

download mode does not open

Lge serial port usb driver can not find

I removed all the drivers and installed it again

Omap4boot : I've tried all but did not respond to

seems to only fastboot display

completely renewed the operating system but unsuccessful

What should I do ?

Thank you for helping
 
jonbubble
Old
#2  
Junior Member
Thanks Meter 0
Posts: 13
Join Date: Jun 2012
i have same problem please someone help
 
Mozzytm
Old
#3  
Senior Member
Thanks Meter 23
Posts: 142
Join Date: Mar 2012
as you might have read in the umpteen (unanswered) panicy posts ive wrote over the past 24 hours ive also had this problem. what ive found out is the download mode with the S/W screen seems intermittent. even if you get a black screen when entering download mode it seems to work and when the flash starts the familiar S/W screen will appear.

if flashing (what ive been doing is)
1. remove battery/sd/sim
2. queue up flashing software and press go
3. when it says ready hold vol up and plug in usb
4. wait a couple of seconds and flash will start
5. a couple of seconds more S/W screen will appear
6. insert battery (without this step all my flashes were failing at 30%)
 
jonbubble
Old
#4  
Junior Member
Thanks Meter 0
Posts: 13
Join Date: Jun 2012
I have managed to reach sw mode using xballs ressurection guide but still can get the serial port needed to come up which you then change to 41. Have reinstalled drivers and bootloaders with no success running windows 7 32bit
Any help with this?
 
Mozzytm
Old
#5  
Senior Member
Thanks Meter 23
Posts: 142
Join Date: Mar 2012
Quote:
Originally Posted by jonbubble View Post
I have managed to reach sw mode using xballs ressurection guide but still can get the serial port needed to come up which you then change to 41. Have reinstalled drivers and bootloaders with no success running windows 7 32bit
Any help with this?
ive heard window 7/8 can be iffy with this so i use an old xp laptop to do all my flashing. i think theres guides on how to get it to go using win 7/8 but i would just install an xp vm
 
Post Reply+
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Go to top of page...