Galaxy Tab GT-P1010 NooB Guide - Last Revised 2012-02-29
2013-03-09 - SEE POST 9 FOR IMPORTANT INFORMATION
Revisions
2012-02-27 - Initial Publication
2012-02-29 - Added Firmware Download, Thread Consolidation, Custom ROM's, Flashing Stock Firmware and Q&A Section(s)
Post Summary
In this thread I will attempt to outline the details I know of regarding the Galaxy Tab GT-P1010. I feel this is a necessary thread because this device is NOT the same as the various other devices that garner so much attention within this forum and I personally experianced quite a difficult time searching to find the questions to my answers as they releated to this device in particular. While it is my opinion that this device should have it's own sub-forum, I do not believe it is popular enough. This said I feel that it is a fairly solid device and if you are like me, you are somewhat lost in in finding the approriate information. Hopefully this thread will be informative and popular enough that it may get stickied so us lowly 1010 users can find the information they are looking for. I am an active XDA member and will do my best to keep this thread updated as new information & techniques become available. If you see some information that you feel should be included do not hesitate to bring same to my attention and I will update the OP's accordinglly. These Instructions are for use on Windows machines even though I personally use a Mac. If you are in the same boat, I recomend running windows within a Virtual Machine (VM). I use Parallels but VirtualBox is a free alternative. Mac and or Linux only instructions may follow at a later date, but honestly a majority of users use Windows so I'm starting there. Without further a do, let's get started.
GT-P1010 Device Specifications
The GT-P1010 is also know as the "Wi-Fi Only" 7" Galaxy Tab. It differs from a majority of the devices in this forum because it has NO 3G or cellular capabilities. The hardware of the device is also different enough from the 3G/Cellular versions, that the Development going on for these other devices will NOT work for it. The GT-P1010 is unfortunately considered a "forgotten" device and even Samsung has seemingly abandoned providing updates for it. This is particularlly evident within the United States (US), however other Countries, speciffically the United Kingdom (UK) have been seeing updates. For the record I am the owner of a US version and this guide was written using my experiance on that device.
A complete list of specifications can be viewed from Samsung's US Website HERE
MD5 Sums
When downloading files from the internet is extremly important that you verify the download was complete and not corrupted. Insuring this can avoid troubleshooting issues that may simply be because of a bad file. All files available from this post will have an MD5 sum next to them. To verify that your file is EXACTLY the same as the file on the server you will need to run it through an MD5 checker. These checkers are available freely over the internet and Mac OS X even has one built in. I'm not going to make this post about how to run these programs but have included a few links below to get you started. A complete explanation of MD5 Sums can be found at Wikipedia.
WinMD5Free
Drivers - Samsung KIES
In order to perform updates to your P-1010 you need to be able to communicate with the device via a USB cable. While there are stand-alone USB drivers available, I chose to install Samsung's "KIES" application so that I could see if any updates were being pushed directly from Samsung. The KIES program also offers additional functionality to allow you to sync various media on your device. This functionality may or may not be needed for all users but by installing the software you are also guaranteed that the drivers needed to communicate with the device are installed on your machine. The US Samsung KIES site can be accessed HERE but I have included a direct link to the latest Windows Version below.
Kies_2.2.0.12014_18_7 ---- MD5 Sum: 7116aa29ce9df3dc2e916128c9c0aa4c
Download the file and double click it to install KIES and the drivers to you system. Once this is acomplished running the program will present you with a screen similar to the one below:
ODIN
ODIN is a utility that communicates with your device when it is in Download Mode (see below). This utility allows you to flash different firmware and other files to your Galaxy Tab. A screenshot of ODIN running is posted below.
To Run ODIN you will need to download and Un-zip the following file. Once this is acomplished you can run the program by simply double clicking the .EXE file "Odin3 v1.85.exe" which will be inside the un-zipped (extracted) folder. The program does NOT get "installed" and this section is just an overview of the tool. Additional steps on when to use it, and how, will be included in the appropriate sections below.
Odin3-v1.85.zip. ---- MD5 Sum: 414e3af7c4c01e21527aeaab65e68a75
Download Mode
Initiating Download Mode
To communicate with ODIN the device needs to be placed into Download Mode. This is accomplished (from an OFF condition) by holding the Volume Down button + the Power Button at the same time until Download Mode is activated. I have found that the easiest way to do this is to press and hold the Volume Down button and then press and hold the Power Button. Download mode will activate within a couple of seconds and your device will indicate such by presenting you with the following screen. As soon as that happens you can release both buttons.
Exiting Download Mode
If you flash any updated files to your Tab using the procedures outlined below, the device will accept the files and reboot on it's own thereby exiting download mode. If you find that you have entered download mode when you did not intend to use ODIN to flash files, you can EXIT download mode by Holding the Power Button for about 10 seconds. The device will then turn off and when you turn it back on it will boot normally. This can be a little scary considering the warning stating "Do Not Turn of the Target". This warning can be ignored and it is actually telling you not to turn it off while files are being written to it.
Connecting Device to ODIN
To play it safe, I recomend that you try connecting your device to KIES FIRST just to insure that the drivers have been installed properly. If KIES can recognize the device then so can ODIN. Simply open KIES and connect the device to your computer via the USB cable. Once you see that KIES is communicating with the Tab you can close KIES and disconnect the Device from the USB. This will only need to be done once, again, just to make sure the communication is working. Once you are satisfied that it is ....
Run ODIN by double clicking the executable file as outlined above. Place the device in download mode as outlined above. Connect the device to the computer using the USB cable. You will then notice that ODIN has found and is communicating with your device because the ID:COM field will turn yellow and assign a COM port to your device. This COM port will vary by user so don't be alarmed if you personally don't see "COM5" as shown in the screenshot below. As long as this field turns yellow you are good to go.
Recovery Mode - Stock
A stock Tab has a built in recovery mode that will allow you to perform a factor reset on the device and other "maintenance". This mode is entered (from an OFF condition) by holding the Volume Up button + the Power Button at the same time until you see the Samsung Logo, then Release the Power button but continue to hold the Volume up button until Recovery Mode is activated and your device presents you with the following screen. As soon as that happens you can release the Volume Up button. Once Recovery is activated you can toggle through the menu items by using the Volume up & Volume down buttons. To execute a selection use either the Power OR Home Button. It is the Power button on my device but this apparently varies on some models.
Rooting
If you are here on XDA then you are probably interested in "Rooting" your device. Rooting has many advantages and certain Market Applications will only work if you have these Root Powers. The US version of the Stock GT-P1010 is currently running the Froyo version of the Android Operating System. A Gingerbread version has not been officially released and may never be. We will deal with upgrading to Gingerbread later in the Tutorial. For now, if you want to Root your device running Froyo (My device had Build: Froyo.UEKC6), you can follow these steps:
1. Download the application Z4Root from the following link:
Z4Root.1.3.0.zip ---- MD5 Sum: 077974421412b25089289acdc763b1c1
2. Unzip the archive to Extract the file : "z4root.1.3.0.apk"
3. Connect your Tab to the PC and initiate "Mass Storage Mode"
8. Setup Z4Root
Titanium Backup is a GREAT program that lets you backup all your applications as well as the user data that is used by them. For example your game progress, high scores, ETC. Titanium Backup REQUIRES Root access and in my opinion is reason enough to Root your device. There is a Free as well as a Paid version of this application. Let's install this program to verify that we have in fact "rooted" our device.
Installing and Checking for Root
To backup your applications and user data using Titanium Backup follow the steps below:
Saving your backup to your computer
There is no reason performing a backup if you are just going to leave it on your device. Obviously if something catastrophic were to happen, you would lose the backup as well. The backup files are located in the /sdcard/TitaniumBackup directory.
To restore your applications and user data using Titanium Backup make sure that the backup containing the files you wish to restore is located at /sdcard/TitaniumBackup and follow the steps below:
Custom Recovery - ClockWorkMod
In the section above we explained about the System Reovery that was built and installed by Samsung. This is great for restoring your system to an out of the box (OOB) condition but not for much else. In order to flash custom Rom's and perform Nandroid Backups we will need to replace the "stock" recovery with a Custom version. ClockWorkMod (CWM) is the recovery of choice for a majority of users and while there are "others" out there, only CWM has been made available for our devices. A Nandroid backup is an exact copy or "image" of your system and can be used to restore your system to the exact state it was in at the time you made the backup. So, lets get to installing CWM.
You will need to download the following file:
Skin1980_P1010_CWM-RECOVERY-BETA-1 ---- MD5 Sum: ca14360ee5f1eebd0efaec5adc77940e
Note: This file is only to be used if you are running the Froyo Version of Android
Once you are in CWM the Volume Up / Down buttonas re used to navigate through the menu choices and the Settings Drawer Hardware ley is used to select an option. The Back hardware key also functions to go back to the previous menu but all screens also offer a "Go Back" choice. If you click the Power Button and are presented with a blank screen simply click it again and CWM will come back up. Now, lets make out first Nandroid Backup!
Making a Nandroid Backup
Again, as with Titanium there is no reason performing a backup if you are just going to leave it on your device. The CWM backup files are located in the /sdcard/clockworkmod/backup directory. Inside this directory you will see a folder that is named based upon the date and time you performed the backup. For Example 2012-02-27.21.57.14 means that the backup was created on February 27, 2012 at 21:57:14. This is UTC time so make sure you add or subtract your UTC offset to get to "local" time.
To restore your system to it's nacked up state make sure that the backup containing the Nandroid you wish to restore is located at /sdcard/clockworkmod/backup and follow the steps below:
In some instances you may be faced with a system that won't boot which makes getting your Nandroid Backup put back on your device problematic. Don't fear. Using CWM you can mount the USB Mass Storage without the need to be running the operating system. Here's how:
While I have compiled all the files, tested them, generated MD5 Sums and written this tutorial based upon my experiance, it should be noted that other users are responsible for the actual Development. If you think I have done a good job and find this information usefull Please click my "THANKS" button. It is not necessary to thank me by witing a seperate post and by not doing so you keep this thread clean and easy to find the information that others may be looking for You should also visit the following users, find a post or two from them and THANK them as well. Without them none of this would be possible.
Skin1980 for his Development of ClockWorkMod for the GT-P1010
RyanZA for his Development of Z4Root
motafoca for his Development of ClockWorkMod for the KPI Firmware
Donations
While I enjoy tinkering with devices and trying new methods, doing so can be time consuming. Compiling and witing this tutorial took me a considerable amount of time. I have also convieniently placed all the required files on an Ad-Free, Fast Download server so you can get them quick and don't need to hunt around. Mediafire was my server of choice but it is NOT free. I pay a monthly service charge to host on the server and this will also insure that the files are available now AND in the future. If you like my work and feel that it has helped you, I would appreciate a donation as a token of your appreciation. Simply click the button below or the "Donate to Me" button under my Username. Anything you can spare will be appreciated and go toward keeping the file sharing up and running as well as keep me interested in generating more tutorials. Thanks in advance!
Questions or Comments
If you have any questons or feel that certain information could be added or clarified, feel free to post them. I will do my best to check this thread often and assist you as best I can. Valid questions will be answered and added to the Q&A post below.
2013-03-09 - SEE POST 9 FOR IMPORTANT INFORMATION
Revisions
2012-02-27 - Initial Publication
2012-02-29 - Added Firmware Download, Thread Consolidation, Custom ROM's, Flashing Stock Firmware and Q&A Section(s)
Post Summary
In this thread I will attempt to outline the details I know of regarding the Galaxy Tab GT-P1010. I feel this is a necessary thread because this device is NOT the same as the various other devices that garner so much attention within this forum and I personally experianced quite a difficult time searching to find the questions to my answers as they releated to this device in particular. While it is my opinion that this device should have it's own sub-forum, I do not believe it is popular enough. This said I feel that it is a fairly solid device and if you are like me, you are somewhat lost in in finding the approriate information. Hopefully this thread will be informative and popular enough that it may get stickied so us lowly 1010 users can find the information they are looking for. I am an active XDA member and will do my best to keep this thread updated as new information & techniques become available. If you see some information that you feel should be included do not hesitate to bring same to my attention and I will update the OP's accordinglly. These Instructions are for use on Windows machines even though I personally use a Mac. If you are in the same boat, I recomend running windows within a Virtual Machine (VM). I use Parallels but VirtualBox is a free alternative. Mac and or Linux only instructions may follow at a later date, but honestly a majority of users use Windows so I'm starting there. Without further a do, let's get started.
GT-P1010 Device Specifications
The GT-P1010 is also know as the "Wi-Fi Only" 7" Galaxy Tab. It differs from a majority of the devices in this forum because it has NO 3G or cellular capabilities. The hardware of the device is also different enough from the 3G/Cellular versions, that the Development going on for these other devices will NOT work for it. The GT-P1010 is unfortunately considered a "forgotten" device and even Samsung has seemingly abandoned providing updates for it. This is particularlly evident within the United States (US), however other Countries, speciffically the United Kingdom (UK) have been seeing updates. For the record I am the owner of a US version and this guide was written using my experiance on that device.
A complete list of specifications can be viewed from Samsung's US Website HERE
MD5 Sums
When downloading files from the internet is extremly important that you verify the download was complete and not corrupted. Insuring this can avoid troubleshooting issues that may simply be because of a bad file. All files available from this post will have an MD5 sum next to them. To verify that your file is EXACTLY the same as the file on the server you will need to run it through an MD5 checker. These checkers are available freely over the internet and Mac OS X even has one built in. I'm not going to make this post about how to run these programs but have included a few links below to get you started. A complete explanation of MD5 Sums can be found at Wikipedia.
WinMD5Free
Drivers - Samsung KIES
In order to perform updates to your P-1010 you need to be able to communicate with the device via a USB cable. While there are stand-alone USB drivers available, I chose to install Samsung's "KIES" application so that I could see if any updates were being pushed directly from Samsung. The KIES program also offers additional functionality to allow you to sync various media on your device. This functionality may or may not be needed for all users but by installing the software you are also guaranteed that the drivers needed to communicate with the device are installed on your machine. The US Samsung KIES site can be accessed HERE but I have included a direct link to the latest Windows Version below.
Kies_2.2.0.12014_18_7 ---- MD5 Sum: 7116aa29ce9df3dc2e916128c9c0aa4c
Download the file and double click it to install KIES and the drivers to you system. Once this is acomplished running the program will present you with a screen similar to the one below:
ODIN
ODIN is a utility that communicates with your device when it is in Download Mode (see below). This utility allows you to flash different firmware and other files to your Galaxy Tab. A screenshot of ODIN running is posted below.
To Run ODIN you will need to download and Un-zip the following file. Once this is acomplished you can run the program by simply double clicking the .EXE file "Odin3 v1.85.exe" which will be inside the un-zipped (extracted) folder. The program does NOT get "installed" and this section is just an overview of the tool. Additional steps on when to use it, and how, will be included in the appropriate sections below.
Odin3-v1.85.zip. ---- MD5 Sum: 414e3af7c4c01e21527aeaab65e68a75
Download Mode
Initiating Download Mode
To communicate with ODIN the device needs to be placed into Download Mode. This is accomplished (from an OFF condition) by holding the Volume Down button + the Power Button at the same time until Download Mode is activated. I have found that the easiest way to do this is to press and hold the Volume Down button and then press and hold the Power Button. Download mode will activate within a couple of seconds and your device will indicate such by presenting you with the following screen. As soon as that happens you can release both buttons.
Exiting Download Mode
If you flash any updated files to your Tab using the procedures outlined below, the device will accept the files and reboot on it's own thereby exiting download mode. If you find that you have entered download mode when you did not intend to use ODIN to flash files, you can EXIT download mode by Holding the Power Button for about 10 seconds. The device will then turn off and when you turn it back on it will boot normally. This can be a little scary considering the warning stating "Do Not Turn of the Target". This warning can be ignored and it is actually telling you not to turn it off while files are being written to it.
Connecting Device to ODIN
To play it safe, I recomend that you try connecting your device to KIES FIRST just to insure that the drivers have been installed properly. If KIES can recognize the device then so can ODIN. Simply open KIES and connect the device to your computer via the USB cable. Once you see that KIES is communicating with the Tab you can close KIES and disconnect the Device from the USB. This will only need to be done once, again, just to make sure the communication is working. Once you are satisfied that it is ....
Run ODIN by double clicking the executable file as outlined above. Place the device in download mode as outlined above. Connect the device to the computer using the USB cable. You will then notice that ODIN has found and is communicating with your device because the ID:COM field will turn yellow and assign a COM port to your device. This COM port will vary by user so don't be alarmed if you personally don't see "COM5" as shown in the screenshot below. As long as this field turns yellow you are good to go.
Recovery Mode - Stock
A stock Tab has a built in recovery mode that will allow you to perform a factor reset on the device and other "maintenance". This mode is entered (from an OFF condition) by holding the Volume Up button + the Power Button at the same time until you see the Samsung Logo, then Release the Power button but continue to hold the Volume up button until Recovery Mode is activated and your device presents you with the following screen. As soon as that happens you can release the Volume Up button. Once Recovery is activated you can toggle through the menu items by using the Volume up & Volume down buttons. To execute a selection use either the Power OR Home Button. It is the Power button on my device but this apparently varies on some models.
Rooting
If you are here on XDA then you are probably interested in "Rooting" your device. Rooting has many advantages and certain Market Applications will only work if you have these Root Powers. The US version of the Stock GT-P1010 is currently running the Froyo version of the Android Operating System. A Gingerbread version has not been officially released and may never be. We will deal with upgrading to Gingerbread later in the Tutorial. For now, if you want to Root your device running Froyo (My device had Build: Froyo.UEKC6), you can follow these steps:
1. Download the application Z4Root from the following link:
Z4Root.1.3.0.zip ---- MD5 Sum: 077974421412b25089289acdc763b1c1
2. Unzip the archive to Extract the file : "z4root.1.3.0.apk"
3. Connect your Tab to the PC and initiate "Mass Storage Mode"
- Connect USB Cable
- Drag down Status Bar and Click "USB Connected" under the ongoing tasks
- Click "Turn on USB Storage"
- Your device should mount and be available as a Removable Drive in Windows
- It doesn't matter where you put this file. Just remember where so you can find it in the next step(s)
- The easiest place would be the "root" of the Removable Disk
- Settings >> Applications >> Check Unknown Sources Box
- Settings >> Applications >> Development >> Check USB Debugging Box
- Use any "file explorer" program on the Tab. You should have an application called "My Files". It will work fine
- Navigate to the .apk file you put on the device in Step 4
- Click the .apk file
- Click Install
- Application will install and you will have a Z4Root Icon in your app drawer
8. Setup Z4Root
- Click the Z4Root Icon
- You will be presented with two (2) Options. Temporary Root & Permanent Root
- I chose Permanent Root but you could "try" it first if you like
- In my case the device re-booted and I was rooted.
- To test this I installed an application called Titanium Backup (see next Section).
- Note: The Z4Root Icon will remain and if you open it again you will be given the option to"Un-Root".
Titanium Backup is a GREAT program that lets you backup all your applications as well as the user data that is used by them. For example your game progress, high scores, ETC. Titanium Backup REQUIRES Root access and in my opinion is reason enough to Root your device. There is a Free as well as a Paid version of this application. Let's install this program to verify that we have in fact "rooted" our device.
Installing and Checking for Root
- Go to the market and search for Titanium Backup
- Give the free version a try just to confrm Root. Simply install it from the market.
- Once installed open the application and you should be presented with a dialog box stating that "Titanium Backup is requesting Super User Permissions".
- Click allow and follow any on-screen instructions
- You will eventually get to an "Overview" screen and should see that Root Access has a Green Checkmark next to it and that BusyBox was installed from the app.
- Congratulations you are now rooted
To backup your applications and user data using Titanium Backup follow the steps below:
- Open Titanium Backup and click the Backup/Restore Tab near the top of the screen
- A list of the applications installed on your device will appear
- Click the Settings Drawer Hardware Key
- Click Batch
- Under the Backup section on the next screen click Run next to "Backup all User App + System Data"
- On the next screen Select the applications you want to backup, They are ALL selected by default.
- Make sure the "Pause Active App's" radio button is selected
- Click "Run the batch operation" button
- Congratulations. You have just performed an application Backup!
Saving your backup to your computer
There is no reason performing a backup if you are just going to leave it on your device. Obviously if something catastrophic were to happen, you would lose the backup as well. The backup files are located in the /sdcard/TitaniumBackup directory.
- Initiate "Mass Storage" as outlined in the Rooting Section above.
- Once the device is mounted navigate to the TitaniumBackup directory. Note: When mounted to the PC, the /sdcard directoy is the one mounted so TitaniumBackup should appear in the root of the Removable Disk.
- Copy the entire TitaniumBackup Directory to your PC
- You now have a folder that can be restored to your device allowing you to restore your applications without re-downloading them from the Market.
- Remember to copy this folder to your computer after perfoming any future backups.
To restore your applications and user data using Titanium Backup make sure that the backup containing the files you wish to restore is located at /sdcard/TitaniumBackup and follow the steps below:
- Open Titanium Backup and click the Backup/Restore Tab near the top of the screen
- A list of the applications installed on your device will appear
- Click the Settings Drawer Hardware Key
- Click Batch
- Under the Restore section on the next screen click Run next to "Restore missing apps with data"
- On the next screen Select the applications you want to Restore, They are ALL selected by default.
- Decide if you want to restore just the app, the app and it's data or just the data by clicking the appropriate radio button
- Click "Run the batch operation" button
- Follow the prompts to install each application
- Congratulations. You have just perfored a restore
Custom Recovery - ClockWorkMod
In the section above we explained about the System Reovery that was built and installed by Samsung. This is great for restoring your system to an out of the box (OOB) condition but not for much else. In order to flash custom Rom's and perform Nandroid Backups we will need to replace the "stock" recovery with a Custom version. ClockWorkMod (CWM) is the recovery of choice for a majority of users and while there are "others" out there, only CWM has been made available for our devices. A Nandroid backup is an exact copy or "image" of your system and can be used to restore your system to the exact state it was in at the time you made the backup. So, lets get to installing CWM.
You will need to download the following file:
Skin1980_P1010_CWM-RECOVERY-BETA-1 ---- MD5 Sum: ca14360ee5f1eebd0efaec5adc77940e
Note: This file is only to be used if you are running the Froyo Version of Android
- Using the information above put your device in Download Mode and connect it to ODIN
- click the PDA button in ODIN and navigate to the file you just downloaded
- Make sure your ODIN screen is setup and matched the screenshot below:
- Click the "Start" button and watch your device and the "Message" section of ODIN. You will see some some text in the message center and your screen will show a progress indicator.
- Once this completes your device will re-boot. It may boot directly to your new ClockWorkMod OR it might boot back into your operating system.
- If it boots to the operating system you can get to CWM using the same procedure outlined in the "Stock" recovery section above. Volume up + Power.
- Make sure you are booted into CWM and see the screen shown below:
Once you are in CWM the Volume Up / Down buttonas re used to navigate through the menu choices and the Settings Drawer Hardware ley is used to select an option. The Back hardware key also functions to go back to the previous menu but all screens also offer a "Go Back" choice. If you click the Power Button and are presented with a blank screen simply click it again and CWM will come back up. Now, lets make out first Nandroid Backup!
Making a Nandroid Backup
- Navigate and Execute the "Backup and Restore" menu item
- Navigate and Execute the "Backup" menu item
- Sit back and wait for your backup to complete.
- A progress indicator as well as some text will be flashing across the screen
- When it completes you will see .. "Backup Complete"
- That's it! Congratulations!
Again, as with Titanium there is no reason performing a backup if you are just going to leave it on your device. The CWM backup files are located in the /sdcard/clockworkmod/backup directory. Inside this directory you will see a folder that is named based upon the date and time you performed the backup. For Example 2012-02-27.21.57.14 means that the backup was created on February 27, 2012 at 21:57:14. This is UTC time so make sure you add or subtract your UTC offset to get to "local" time.
- Initiate "Mass Storage" as outlined in the Rooting Section above.
- Once the device is mounted navigate to the clockworkmod/backup directory. Note: When mounted to the PC, the /sdcard directoy is the one mounted so clockworkmod directory should appear in the root of the Removable Disk.
- Copy the folder containing your backup to your PC
- You now have a folder that can be restored to your device allowing you to restore your system to the exact sate it was in at the time of the backup..
- Remember to copy any future backups to your PC as Well.
To restore your system to it's nacked up state make sure that the backup containing the Nandroid you wish to restore is located at /sdcard/clockworkmod/backup and follow the steps below:
- Boot into CWM
- Navigate and Execute the "Backup and Restore" menu item
- Navigate and Execute the "Restore" menu item
- Sit back and wait for your restore to complete.
- A progress indicator as well as some text will be flashing across the screen
- When it completes you will see .. "Restore Complete"
- Navigate to and execute the "Reboot System Now" menu item
- Your device will reboot and you will be restored to the exact state your system was in when you made the backup
In some instances you may be faced with a system that won't boot which makes getting your Nandroid Backup put back on your device problematic. Don't fear. Using CWM you can mount the USB Mass Storage without the need to be running the operating system. Here's how:
- Boot into CWM
- Plug your USB Cable into your PC
- Navigate to and Execute the "Mounts and storage" menu item
- Navigate to and Execute the "mount USB storage" menu item
- The Device will mount and you will have access to it from your PC
- Copy your Nandroid Backup to the clockworkmod/backup folder
- Go "back"
- Go "Back"
- Go to "backup and restore"
- Restore your Nandroid
- Reboot
- Welcome back to a running machine!!
While I have compiled all the files, tested them, generated MD5 Sums and written this tutorial based upon my experiance, it should be noted that other users are responsible for the actual Development. If you think I have done a good job and find this information usefull Please click my "THANKS" button. It is not necessary to thank me by witing a seperate post and by not doing so you keep this thread clean and easy to find the information that others may be looking for You should also visit the following users, find a post or two from them and THANK them as well. Without them none of this would be possible.
Skin1980 for his Development of ClockWorkMod for the GT-P1010
RyanZA for his Development of Z4Root
motafoca for his Development of ClockWorkMod for the KPI Firmware
Donations
While I enjoy tinkering with devices and trying new methods, doing so can be time consuming. Compiling and witing this tutorial took me a considerable amount of time. I have also convieniently placed all the required files on an Ad-Free, Fast Download server so you can get them quick and don't need to hunt around. Mediafire was my server of choice but it is NOT free. I pay a monthly service charge to host on the server and this will also insure that the files are available now AND in the future. If you like my work and feel that it has helped you, I would appreciate a donation as a token of your appreciation. Simply click the button below or the "Donate to Me" button under my Username. Anything you can spare will be appreciated and go toward keeping the file sharing up and running as well as keep me interested in generating more tutorials. Thanks in advance!
Questions or Comments
If you have any questons or feel that certain information could be added or clarified, feel free to post them. I will do my best to check this thread often and assist you as best I can. Valid questions will be answered and added to the Q&A post below.
Last edited: