[ROM][4.0.4][MTD] CyanogenMod 9.0.0 | READ : http://goo.gl/rkEeh

Status
Not open for further replies.
Search This thread
By:
Advanced…
alroger

alroger

Senior Member
May 19, 2011
1,299
1,937
Deerfield Beach
OnePlus 6
Moto G Stylus 5G
VPN PPTP MPPE not working

sbradymobile said:
Try setting the owner on /data/misc/vpn.
chown system.vpn /data/misc/vpn

The vpn change to the initramfs creates the directory with this owner, but if it exists the owner won't change. I will add a line in the initramfs to set the owner after creating the directory.
Click to expand...
Click to collapse

Ok, that worked.
chown -R system.vpn /data/misc/vpn

But I'm back to the same PPTP with encryption problem that has always haunted me in any ROM version... After a few packets are transfered the VPN hangs... stops receiving anything. :mad:
 
A

ableeker

Senior Member
Nov 20, 2010
239
34
My own compiled version works, and even boots without flashing zImage, apart from one thing: there's no data connection. Searching for network operators doesn't return any results, the access point list is empty, and restoring the default or adding a new one doesn't do a thing.

Does anybody know what could be causing this?
 
gurudev32

gurudev32

Senior Member
May 2, 2011
139
179
Bengaluru
ableeker said:
My own compiled version works, and even boots without flashing zImage, apart from one thing: there's no data connection. Searching for network operators doesn't return any results, the access point list is empty, and restoring the default or adding a new one doesn't do a thing.

Does anybody know what could be causing this?
Click to expand...
Click to collapse

Which modem r u on ?

Sent from my GT-P1000 using xda premium
 
A

ableeker

Senior Member
Nov 20, 2010
239
34
As far as I know the ROM's don't include modems, so I should still be using the JPZ modem that comes with JQ1 as I restock to the Overcome package that includes that one.

The odd thing is that the 3/7 TE4M ICS ROM works just fine, as does AOKP build 25.
 
J

jimmcghee

Senior Member
Apr 7, 2010
180
39
Garland, Texas
Will the Humberos ROM work on the Spring SPH-P100?

humberos said:
Hi fellows!

Just check it!

http://www.humberos.com.br/p/android-ics.html

ps. Today is my brother birthday!
This is for him!
Enjoy!
Click to expand...
Click to collapse

I have a SPH-P100 and when I try to load the rom with CWM it gives me an assert error because the product is not either P-1000 or galaxytab. Have I installed the wrong CWM? I'm assuming the kernel for cdma is the right one for the P100. Does the Humberos ROM not work on the P-100? :confused:
This is the same problem I'm having trying to install the ROM I built from the instructions on post #3. There I'm also assuming p1c is for the P100.
Pointing me in the right would sure be appreciated!
 
humberos

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
jimmcghee said:
I have a SPH-P100 and when I try to load the rom with CWM it gives me an assert error because the product is not either P-1000 or galaxytab. Have I installed the wrong CWM? I'm assuming the kernel for cdma is the right one for the P100. Does the Humberos ROM not work on the P-100? :confused:
This is the same problem I'm having trying to install the ROM I built from the instructions on post #3. There I'm also assuming p1c is for the P100.
Pointing me in the right would sure be appreciated!
Click to expand...
Click to collapse

just remove the assert function in update script.
It should work .

Greetings from Brazil!

Sent from my GT-P1000 using xda premium
 
  • Like
Reactions: ronak.super, GalaxyMan123, jimmcghee and 1 other person
R

reddog69

Senior Member
Dec 16, 2009
100
11
clinton,mo
compile error

hey guys wondering if u could help me out with this error.any help is greatly appreciated and great job./home/rich/cm9/kernel/samsung/p1/scripts/gen_initramfs_list.sh: line 299: lzma: command not found
make[1]: *** [usr/initramfs_data.cpio.lzma] Error 1
make: *** [usr] Error 2
thank u anybody have any ideas on this.i had been compiling my own roms fine until march4 then started getting just a blank screen so i deleted my repo and started over and now i am getting that error at the beginning of the build.thanks in advance for any advice
 
J

juanpirulo

Senior Member
Apr 19, 2011
1,378
1,061
vitoria-gasteiz (basque Country)
OPPO Find X3 Pro
reddog69 said:
hey guys wondering if u could help me out with this error.any help is greatly appreciated and great job./home/rich/cm9/kernel/samsung/p1/scripts/gen_initramfs_list.sh: line 299: lzma: command not found
make[1]: *** [usr/initramfs_data.cpio.lzma] Error 1
make: *** [usr] Error 2
thank u anybody have any ideas on this.i had been compiling my own roms fine until march4 then started getting just a blank screen so i deleted my repo and started over and now i am getting that error at the beginning of the build.thanks in advance for any advice
Click to expand...
Click to collapse

Did you make "mrproper" in p1 directory?

Enviado desde mi GT-I9100 usando Tapatalk
 
  • Like
Reactions: reddog69
amahabir

amahabir

Senior Member
Oct 27, 2008
63
9
Charlotte
humberos said:
just remove the assert function in update script.
It should work .

Greetings from Brazil!

Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse

I wanted to see if I can get this installed and have deleted the assert function. It shows "Installation aborted" after zipping back up the file and trying to flash. I also tried replacing the kernel in the ROM from the one in the CDMA file, still won't work. I am using a Sprint Tab and have the latest CWMrecovery installed v5.5.0.4...thanks.
 
C

cpgeek

Senior Member
Nov 27, 2007
236
46
Storrs, CT
Thank you so much to everyone involved with the hard work that has gone into building this awesome rom!

It got sooo much faster in the last release, got cameras (albeit slow performing but they work!), and muuuuch better hardware acceleration ( enough for Netflix to work.)

Only other issues I've had are the green line in anything that buses HD he acceleration, and also wifi networks on 5ghz don't seem to show up at all (they did before so idk what's going on)

For the record I'm using humberos' newest 3/2012 build which I installed fresh by restocking to the overcome safe stock, installing the from, p1000 kernel, and gapps from recovery, wiping all caches and /data and then booting and "wiping the SD card" from android settings just to make sure there weren't any outdated apps left behind.

Sent from my GT-P1000 using XDA
 
C

cja1972

Senior Member
Jun 14, 2010
176
48
mtp workaround help

I have some samsung films i want to be able to watch on my tab but also want to keep using this rom as its perfect and everything is working great ( using angel camera whilst the native one is being fixed) . If i go back to the beginning , reinstall safe gb rom and root convert to ext4 using overcome instal sky go, hide my root and also move the films i want onto the rom. Then create a back up. Would i in theory be able to then instal this ics rom and kernel for every day use and revert to the back up to be able to use skygo and watch my drm protected films ?Or do i just have to wait for the dev's to come up with the mtp fix ?

I seem to be going wrong somewhere as i get an orange backup screen when doing the back up from gingerbread and a blue one from ics.and the restore fails .

Any help or advice much appreciated ...
 
R

reddog69

Senior Member
Dec 16, 2009
100
11
clinton,mo
compile error

thanks for the fix on the lzma thing i guess it was pretty stupid on my part not catching that.next question i am getting builds that boot to a blank screen and never go any further any idea what is going on with that.And alroger appreciate ur kernels that is what i have been using up to this point. thanks for any help
 
alroger

alroger

Senior Member
May 19, 2011
1,299
1,937
Deerfield Beach
OnePlus 6
Moto G Stylus 5G
reddog69 said:
thanks for the fix on the lzma thing i guess it was pretty stupid on my part not catching that.next question i am getting builds that boot to a blank screen and never go any further any idea what is going on with that.And alroger appreciate ur kernels that is what i have been using up to this point. thanks for any help
Click to expand...
Click to collapse

Sounds like you're not flashing the kernel after the rom, at least not the correct one.
Let's please go to the nightly or discussion threads and I will try to help in anyway I can.

- Tapatalk - SGT-P1000N - CM9 RC0 -
 
R

Raleran

Senior Member
Aug 22, 2007
84
9
humberos said:
just remove the assert function in update script.
It should work .

Greetings from Brazil!

Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse


I'm in the same situation, I'm installing on a SPH-P100 with a kernel with CWM 4.0.1.5 bajed ubti ut, I tried to install the rom and received the assert error. I went into the updater-script file and deleted the assert line. But now when I try to install it all it says is "Installation aborted".

When troubleshooting I tried modifying the file first in windows, then in linux as I know sometimes zip in windows messes with file attributes. With no error message, I don't know what to try next. Any ideas?
 
humberos

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
Raleran said:
I'm in the same situation, I'm installing on a SPH-P100 with a kernel with CWM 4.0.1.5 bajed ubti ut, I tried to install the rom and received the assert error. I went into the updater-script file and deleted the assert line. But now when I try to install it all it says is "Installation aborted".

When troubleshooting I tried modifying the file first in windows, then in linux as I know sometimes zip in windows messes with file attributes. With no error message, I don't know what to try next. Any ideas?
Click to expand...
Click to collapse


Look!

Try this way:

1 - Back to your CwM 4.0.1.5
2 - Install latest CDMA CM9 Kernel - reboot in to recovery mode
3 - Install CM9 ROM - don't reboot
4 - Again, install latest CDMA Kernel - reboot

Let me know if this way work.

Greetings from Brazil!
 
Last edited:
  • Like
Reactions: jeebspawnshop and andnej
R

Raleran

Senior Member
Aug 22, 2007
84
9
Unfortunately I can't seem to get past step 2. The kernel loads successfully but when I try to boot back into recovery (either using the reboot recovery menu option or power+vol up) I get stuck on the samsung screen. I went between the kernels a couple times and will try starting over again by going back to stock unless you have another suggestion.

Thanks.
 
Status
Not open for further replies.

Similar threads

stimpz0r
  • Poll
[ROM] [ICS|MTD] [GSM/CDMA] AOKP SGT7 - Milestone #6 (19/09/2012)
Replies
3K
Views
1M
A
agustincordoba
cdesai
[ROM][4.1.2] CyanogenMod 10
Replies
1K
Views
434K
L
lordorwell
cdesai
  • Locked
[ROM][4.1.1] CyanogenMod 10 Preview [Build 4]
Replies
1K
Views
464K
cdesai
cdesai
cdesai
[ROM][4.2.2]CyanogenMod 10.1 Nightly builds
Replies
551
Views
327K
Cyterafle
Cyterafle
alterbridge86
  • Locked
[7.July.2011][ROM][GSM][2.3.3] ◄► Overcome ROM v3.0.0-ICARUS ◄► Kernel v3.2.0 ◄►
Replies
5K
Views
930K
alterbridge86
alterbridge86

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 190
    cdesai
    cdesai
    Read this, IMPORTANT: http://goo.gl/rkEeh

    Code: 
    ** These CyanogenMod builds are highly experimental and unsupported.
**
** If one of this builds bricks your phone, kills your cat or causes
** a thermonuclear war, don't point at us. We'll laugh at you.
** You decided to make this modifications to your Tablet.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on experimental builds is the leading 
** cause of male impotence.

    IMPORTANT NOTES
    Click to expand...
    Click to collapse

    This is a stable Build of the current state of CyanogenMod 9 for the Samsung Galaxy Tab.
    CM9 is based on latest AOSP sources plus some useful tweaks and features.

    Useful links
    Click to expand...
    Click to collapse
    Known issues, Downloads and Screenshots: Post #2
    General Discussion thread : SGT7 General
    Developer only post : Post #3 (how to build and more)
    What is MTD (for epic, but its the same for all Samsung devices - except the ROM links ofcourse) http://xdaforums.com/showthread.php?t=1387334

    Please refrain from submitting bug reports for any build not released by us - report em to whom u got the build from

    We'll release new builds when we feel like doing so, although we do keep our sources updated all the time!

    The people behind this :
    Click to expand...
    Click to collapse

    angel_666
    cdesai
    humberos
    jt1134
    koxudaxi
    red_rebel
    sbradymobile
    eaut
    Techomancer

    Big thanks to Teamhacksung for all their work on the aries, and for all the help

    And Ofcourse - the CyanogenMod Team!
    View
    88
    cdesai
    cdesai
    Known Issues + Useful info :
    Click to expand...
    Click to collapse
    USB Tethering won't work in windows (works in ubuntu, untested on OSX)
    Internal sd is /mnt/sdcard, and external is /mnt/emmc
    USB Host works with a Y cable as the tab doesn't supply power, doesn't with the standard Samsung Adapter for the new tabs.

    Downloads :
    Click to expand...
    Click to collapse
    Official Nightlies : http://get.cm/
    p1 : http://get.cm/?device=p1 [GSM Tabs]
    p1c : http://get.cm/?device=p1c [CDMA Tabs]
    Modems :
    p1 [GSM] : http://goo.gl/EjHq5 (Flash via CWM)
    p1c [CDMA] : http://goo.gl/Dhmjl (Flash via Odin)

    READ THIS BEFORE FLASHING
    ^It's for the epic but it's pretty much the same thing except the ROM links, and the only ROMs having MTD now are CM9 based ROMs - no MTD on GB

    Only way to revert to a normal ROM now is flashing a stock Samsung ROM by odin (with repartition checked)


    How to Flash the above zips :

    You need to restock your tab if you are running an old MTD build, (only if /system isn't 406 mb, check it by the command `df system` or use an app (such as root explorer) )
    IF you are coming from a FSR (STL/BML) ROM (aka Samsung ROM - anything else than the latest CM9 builds / AOKP builds, i.e. any GB ROM, no need to restock)
    IF you are coming from a froyo ROM, you need to flash a stock GB ROM first, follow the guide below :

    Restocking :
    Follow the team overcome restock guide [http://www.teamovercome.net/p1000/?page_id=17], and completely restock your tab.
    Once you've flashed it, reboot into download mode again and flash any kernel with recovery (any non-MTD kernels from humberos.com.br, or this forum, for your tab model)
    After you've flashed the kernel, reboot into recovery, and this time, install the zip you just downloaded from CyanogenMod servers.
    Install Google Apps if you want (gapps-ics-* from goo.im) [optional]
    Reboot and enjoy your tab :)

    Normal install :
    You need to have a kernel with CWM Recovery
    Get the zip from the above download links
    Put the zip on your sdcard, reboot into recovery, and install the zip
    It'll reboot a few times during the install, that's normal :)


    Screenshots :
    Click to expand...
    Click to collapse
    attachment.php
    attachment.php
    attachment.php
    View
    44
    cdesai
    cdesai
    DEV AREA NOW
    Click to expand...
    Click to collapse

    Sources :

    CyanogenMod : https://github.com/CyanogenMod
    SGT7 (based off CyanogenMod sources with a few tweaks of our own) https://github.com/sgt7

    All device tress (p1, p1c and p1-common) and kernel tress (p1 and p1c) have been merged into the CyanogenMod tree now, if you want to submit a change/patch, use cm code-review [http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit]

    How to get the sources :
    Setup Android Build Environment (http://source.android.com)
    Code: 
    mkdir ~/cm9
cd ~/cm9
repo init -u git://github.com/CyanogenMod/android.git -b ics
    (Type in your name and email address when asked)
    Code: 
    repo sync
    (^^This'll take a while, as ~7GB of sources are downloaded initially)

    How to build :
    Code: 
    source build/envsetup.sh
cd device/samsung/p1 ; ./extract-files.sh
brunch p1
    Replace p1 with p1c for CDMA variants.
    Building may take a long time depending on your machine, might range from a few minutes to many hours
    After the build is done, navigate to ~/cm9/out/target/product/p1
    The zip you'll be looking for would be update-cm-9.0.0-RC0-p1-UNOFFICIAL-signed.zip

    If you want to build just the kernel, type the below commands
    Code: 
    source build/envsetup.sh
make out/target/product/p1/boot.img

    If you want just the kernel - u'll get it in the same folder, boot.img
    Flash it with heimdall
    heimdall flash --kernel ~/cm9/out/target/product/galaxytab/boot.img --recovery ~/cm9/out/target/product/galaxytab/boot.img

    ^^The above instructions were for building a clean CyanogenMod build for p1, without any changes we did to the sources (mainly frameworks and some apps)

    IF you want to build that, sync from https://github.com/sgt7/android.git instead of CyanogenMod, and then build using the same commands
    View
    38
    cdesai
    cdesai
    I got some news!

    https://plus.google.com/115013390614274076135/posts/CcmArQkDDXn

    Official builds coming soon!


    But, till then, i suggest the kangers not to sync, as i'll be changing stuff upstream which might break the build(mainly vendor/samsung, device is now p1 and p1c)

    So, dont repo sync until i give a heads up(or remove vendor/samsung from your manifest)

    And, don't try to build p1 atm (uploading it in a while) - Can build the good old galaxytab fine, just don't try to build p1 or you'll be on your own (you'll know why soon)
    View
    37
    humberos
    humberos
    CM9 - Updates

    Hi fellows!

    Just check it!

    http://www.humberos.com.br/p/android-ics.html

    ps. Today is my brother birthday!
    This is for him!



    Greetings from Brazil!

    Enjoy!
    View

New posts