I installed version 0.3 and cannot turn wifi on too... but the OC is working fine, even tho I wont use it for more than 1.4 GHz 
pawitp's CM11 on Galaxy Grand
pawitp's CM11 on Galaxy Grand
[kernel][cm/aosp][i9082/L][evolution kernel][v1.8.1]21052014[LINARO-4.9.1]
- Thread starter k2wl
- Start date
can you please tell me where is the 0.4 version of this kernal
i am used 0.3 version of kernal
wi fi not working
antutu score decrease 11321 to 8752
0.2 gives 11442 antutu score
i am used 0.3 version of kernal
wi fi not working
antutu score decrease 11321 to 8752
0.2 gives 11442 antutu score
Last edited:
wifi fixed.
its in link for downloads https://www.mediafire.com/folder/ifx0oopyy5ajt/kerneli9082
wifi is fixed in 0.4b version.
its in link for downloads https://www.mediafire.com/folder/ifx0oopyy5ajt/kerneli9082
wifi is fixed in 0.4b version.
confirmed Wi Fi not working
but device performance increased, Over clocking working fine and it show upto 1.7 GHZ:good:
Please resolve the wi fi now back to 0.2
but device performance increased, Over clocking working fine and it show upto 1.7 GHZ:good:
Please resolve the wi fi now back to 0.2
Last edited:
Checked 0.5 version.. Wifi still not working, strangely mobile data also not working
Sent from my GT-I9082 using Tapatalk
Sent from my GT-I9082 using Tapatalk
strange is working fine here. .. OK. ..I will update with new version soon.
I' will be thankful if someone post logcat....plz...
Last edited:
I'm really new to logcat... did I do this right? Sorry if I'm doing it wrong.
All I did was 1. flashed kernel version 0.5 via recovery, 2. boot up the device, 3. opened settings and switched on wifi, but as you know, it's not turned on. 4. started up the terminal and typed logcat -d -f /sdcard/logcat.log *:V
All I did was 1. flashed kernel version 0.5 via recovery, 2. boot up the device, 3. opened settings and switched on wifi, but as you know, it's not turned on. 4. started up the terminal and typed logcat -d -f /sdcard/logcat.log *:V
RVR
Inactive Recognized Contributor
RVR
Inactive Recognized Contributor
OK in v0.5 Wifi working now but why getting less benchmarks scores don't know really from 11500 to 8500
Sent from Unofficial CM11 Galaxy Grand 4.4.2 - k2wl's kernel v0.2
Sent from Unofficial CM11 Galaxy Grand 4.4.2 - k2wl's kernel v0.2
For me it's down from 11695 (version 0.2) to 11341 (version 0.5, with overclocking to 1.4 GHz)
Also the phone doesn't show up when I connected it to my PC. Is anybody experiencing the same?
Reverting to 0.2 for the time being, it's really a fast kernel. :good:
Calls not working in v, 0.5, can any one confirm?
Sent from Unofficial CM11 Galaxy Grand 4.4.2 - k2wl's kernel v0.2
Sent from Unofficial CM11 Galaxy Grand 4.4.2 - k2wl's kernel v0.2
yeah, its rebooting the phone... though wifi is now working...
---------- Post added at 07:46 AM ---------- Previous post was at 07:37 AM ----------
same here benchmark is 8500 upto 8600 only
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
36WARNING : THIS KERNEL IS ONLY FOR AOSP/CM variant based ANDROID 4.4 !
As franco said in his every thread... i dont like Long OPs...
Lets get to the point...
version 0.1
https://www.mediafire.com/?l1lukrzax544v96
version 0.1.1
https://www.mediafire.com/?5cc6z4cxgskctf6
version 0.2
https://www.mediafire.com/?5b59ldl6q6z44rh
upto 1.2 version all downloads will be in following location.
http://www.mediafire.com/?ifx0oopyy5ajt
Following 1.3 version the following will be the download location.
http://www.androidfilehost.com/?w=files&flid=12091
Use 1.7.5 version for RR based roms.
1.7.6 version is for latest cm11 and based roms which support dual-sim.
Version 1.7.8 for all roms...
changelog next post.
sources :
https://github.com/k2wl/evolution_i9082.git
credits:
pawtip35changelog:-
version 0.1
- based of pawtip cm sources.
- added frandom to the build.
version 0.1.1
- fixed boot on cm11
version 0.2
- added LZMA compression for kernel, now kernel is 3.8 mb only instead of ~6 mb.
- Added OC upto 1500MHz (1400 MHz is recommended)
version 0.3
- added 1.6 ghz
- increase max readahead to 4096
- updated to 3.0.33
version 0.4b
- update to 3.0.34
- added new frequencies 152, 412, 512,712,900, 1000, 1100, 1364, 1432, 1586, 1600, 1700 MHz
- compile with SaborMod toolchain 4.7
version 0.5 fixed version (15/12/2013)
fixed wifi, finally.
version 0.5.1
fixed MTP issue with more optimisations and new frequency steps....
version 0.6
-Sched Tweaks to improve performance...
-Early Suspend Delay- Sysfs interface
-logger: Add sysfs interface to Enable / Disable Android Logger
switching done via /sys/kernel/logger_mode interface
default is 0 (off)
version 0.7
-Added new I/O schedulers Vr, ROW, SIO, SIOPLUS, ZEN
-Added new governers smartass2, conservative zzmoove (thanks to @chotu222 )
-new battery percentage fixed with pawtip 17122013 update.
version 0.7.1
-fixed call (incoming and outgoing) issue.
-accidentaly rebased my kernel source to stock...guuurrrr......:crying:
now i have to start from scrach...
you pleaple have to wait for next update...sorry.....:crying:
version 0.8a
- fixed battery .(using since 3 days now)
- added new I/O fifo schedulers
-added new governers...now 16 are there ....test out on your own..
version 0.9
-updated to pawtip's new rom
-added new governer "k2wl" ...yes mine own...my precious...:victory::laugh:
-removed useless govs
-added samrtassv2 back.
Version 1.0
-updated to latest pawitp sources and kernel version 3.0.101
-Compiled with latest linaro (4.8.3 GCC 2013.12 version) [Compiled for our grand CPU by me, see the screenshot:victory:]
-added performance tweaks.
-removed gov and I/O schedulers for now. will add them back later.
Version 1.1
-Added new frequency steps.
few changes i dont remember.
Version 1.2
-Added more frequency steps
- fixed scheduler latency.
Version 1.3
- compiled with latest linaro constomized toolchain by me 4.8.3 2014.1 .
- more OC steps added.
- Performance app included (credits to @ xenon92)
- Full ARM Topology + optimizations
- added UKSM 0.1.2.2
- optimize Kernel Samepage Merging(KSM)
- Permanent filesystem TRIM
version 1.4
- Added CPU boost driver from 3.4 kernel
- updated performance control app to latest (thanks to @ xenon92 and @ h0rn3t )
- Added OC to 1.6 Ghz
- 4.8.3 linaro optimization flags -Og
Version 1.5
- 1.5 version is born
- Zram: accept up to 4 devices
- enabled zram and zsmalloc
- added zswap and zbud and enabled.
- zbud from 3.11 kernel
- mm: Rename function "reset_page_mapcount" to "page_mapcount_reset"
- update cleancache to 3.11 kernel
- update frontswap to 3.11 kernel
- fix mm/kconfig
- Add zswap backend from Linux kernel 3.11
- adapt frontswap to 3.0 kernel
- Backport zbud from kernel 3.11
- adapt zram to zsmalloc from 3.11 kernel
- update zsmalloc to kernel 3.11
- update zcache to kernel 3.11
- backport frontswap from kernel 3.9
- adapt zcache from 3.9 to 3.0 kernel
- deleted unused zcache.c
- Backported ZCache mechanism from Linux Kernel 3.9.11
- fix zram_drv.c
- zram: optimize memory operations with clear_page()/copy_page()
- staging: zram: add per-cpu support to Crypto
- staging: zram: add Crypto API support
- drivers/staging/zram: adapt to 3.0 kernel
- drivers/staging/zram: backport zram from 3.7 kernel part 2
- drivers/staging/zram: backport zram from 3.7 kernel
- staging: Add Snappy compression support to zram
- staging: Add Snappy compression library (v3)
- Fix Cleancache porting
- Cleancache & frontswap new headers
- enabled frontswap
- enabled zcache and cleancache
- Adapt Cleancache & Frontswap on Kernel 3.0
- added cleancache from 3.7 and frontswap from 3.8
- Introduce ZCACHE from Kernel 3.8
- enabled zram and zsmalloc
- ZSMALLOC source files from Kernel 3.8
- Added zsmalloc for 3.0 support
- LZ4 references
- lib/lzo: Update LZO compression to current upstream version , lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c , lib/lzo: huge LZO decompression speedup on ARM by using unaligned access
- xz: Tweaking
- addded piggy.xzkern and modify .gitignore
- init:calibrate: lpj from linux kernel 3.4
- boot: Enable XZ compression
- crypto-add-lz4-cryptographic-api-fix
- crypto: add lz4 Cryptographic API
- lib-add-lz4-compressor-module-fix
- ib: add lz4 compressor module
- arm: Remove enforced Os flag for LZ4 decompressor
- arm: add support for LZ4-compressed kernel
- kbuild: fix for updated LZ4 tool with the new streaming format
- lib: add support for LZ4-compressed kernel
- decompressor: add LZ4 decompressor module
- lib: add weak clz/ctz functions
- sched: smart wake-affine foundation and disable uksm for while.
- revert hard code dirty ratios
- aded local version with OC
Version 1.6
- Highly experimental (not for weak hearted.)
- Enabled Highmemory
- Kernel timer to hz_128 from hz_100
- few updates
Version 1.6.1
- bluetooth fixed...hopefully..
- implemented boeffela sound 1.6 (thanks to andip71)
- few performance tweaks
- see git log for more
Version 1.7
- fs: move code out of buffer.c
- mm, memcg: give exiting processes access to memory reserves
- staging: android: lowmemorykiller: Management of not killable processes
- LMK from 3.4 kernel
- nohz: Remove nohz_cpu_mask
- Implemented lots and lots of tweaks into single commit...hope everything will go right.... Fingers crossed...view git commit https://github.com/k2wl/evolution_i9082/commit/f19b5b35959b79e432d2b970477fd0fb16e449fc
Version 1.7.1
- Fixed autosleep and enabled it from 3.4 google main line kernel
- kernel/power/powersuspend: new PM kernel driver for Android w/o earlysuspend (faux123). Back
- Add permission checking for binder IPC.
- Logger: Add sys fs kernel interface to configure Android logger
- Increase default entropy setting
- Android: lowmemorykiller: add lmk parameters tunning code.
- revert hz_128 to hz_100, might fix soft reboots.
Version 1.7.3
-reverted few changes to fix reboot issue.
Version 1.7.4
- Now works with cm11 latest (09032014, pawitp update), i.e dual sim...
- few performance tweaks
Version 1.7.5
- New f2fs support...
- ext4 support enhanced..
- SLUB from 3.3 kernel
version 1.7.6
cm11 dual sim compatibility.
Version 1.7.7
Using AnyKernelUpdater by KOUSH.
Merged all f2fs changes to main evolution kernel . now all features from old kernel available on 1.7.7 kernel.
few performance tweaks.
Version 1.7.8
Highly experimental and great kernel...
i am cant post log here...
its long...
dso see it yourself on github...
https://github.com/k2wl/evolution_i9082/commits/cm11exp1
from page 1 to 18 ......too long....
version 1.7.9
- Fixed wifi issue. ( thanks to xenon92 )
- Compiled with latest SM toolchain 4.10 (see the screenshot)
- Enable smartass2
- few performance changes
Version 1.8.0
-Allocate whole ram to userspace. now total ram is 803 MB.
-Added new governers lulzactiveq, lulzactive, smartassH3, smartassv2.
- Added new I/O schedulers sio, fiops, bfq.
- Multicore power saving feature.
- MOre perfromance tweaks with battery saving features added.
-Compiled with latest linaro 4.10
Version 1.8.1
- USB host notify enabled [OTG part 1]
- Given more power to USB fsa9845 switch
- reverted back to 4.9.1 linaro toolchain.
- few battery saving and performance tweaks12New much much improved version is up.
Changelog is too much to quote :
2014-02-17
* 1.5 version is born
* Zram: accept up to 4 devices
* enabled zram and zsmalloc
* added zswap and zbud and enabled.
* zbud from 3.11 kernel
* mm: Rename function "reset_page_mapcount" to "page_mapcount_reset"
* update cleancache to 3.11 kernel
* update frontswap to 3.11 kernel
* fix mm/kconfig
* Add zswap backend from Linux kernel 3.11
* adapt frontswap to 3.0 kernel
* Backport zbud from kernel 3.11
* adapt zram to zsmalloc from 3.11 kernel
* update zsmalloc to kernel 3.11
* update zcache to kernel 3.11
* backport frontswap from kernel 3.9
* adapt zcache from 3.9 to 3.0 kernel
* deleted unused zcache.c
* Backported ZCache mechanism from Linux Kernel 3.9.11
* fix zram_drv.c
* zram: optimize memory operations with clear_page()/copy_page()
* staging: zram: add per-cpu support to Crypto
* staging: zram: add Crypto API support
* drivers/staging/zram: adapt to 3.0 kernel
* drivers/staging/zram: backport zram from 3.7 kernel part 2
* drivers/staging/zram: backport zram from 3.7 kernel
* staging: Add Snappy compression support to zram
* staging: Add Snappy compression library (v3)
* Fix Cleancache porting
* Cleancache & frontswap new headers
* enabled frontswap
* enabled zcache and cleancache
* Adapt Cleancache & Frontswap on Kernel 3.0
* added cleancache from 3.7 and frontswap from 3.8
* Introduce ZCACHE from Kernel 3.8
* enabled zram and zsmalloc
* ZSMALLOC source files from Kernel 3.8
* Added zsmalloc for 3.0 support
* LZ4 references
* lib/lzo: Update LZO compression to current upstream version , lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c , lib/lzo: huge LZO decompression speedup on ARM by using unaligned access
* xz: Tweaking
* addded piggy.xzkern and modify .gitignore
* init:calibrate: lpj from linux kernel 3.4
* boot: Enable XZ compression
* crypto-add-lz4-cryptographic-api-fix
* crypto: add lz4 Cryptographic API
* lib-add-lz4-compressor-module-fix
* ib: add lz4 compressor module
* arm: Remove enforced Os flag for LZ4 decompressor
* arm: add support for LZ4-compressed kernel
* kbuild: fix for updated LZ4 tool with the new streaming format
* lib: add support for LZ4-compressed kernel
* decompressor: add LZ4 decompressor module
* lib: add weak clz/ctz functions
* sched: smart wake-affine foundation and disable uksm for while.
* revert hard code dirty ratios
* added local version with OC
Enjoy....
@iceyhotguy the performance app now work flawlessly...
all values now can be customized.10Version 1.8.0
-Allocate whole ram to userspace. now total ram is 803 MB.
-Added new governers lulzactiveq, lulzactive, smartassH3, smartassv2.
- Added new I/O schedulers sio, fiops, bfq.
- Multicore power saving feature.
- MOre perfromance tweaks with battery saving features added.
-Compiled with latest linaro 4.109New version 1.7.8 is here
Versionn 1.7.8
Highly experimental and great kernel...
i am cant post log here...
its long...
so see it yourself on github...
https://github.com/k2wl/evolution_i9082/commits/cm11exp1
from page 1 to 18 ......too long....
