[KERNEL][AOSP/AOKP/CM9][5-September][4.1][Thoravukk] APP•TUN•NTFS•CIFS•OC/UV•BLN•OTG

***4.1***
linux 3.0.37-42
update to latest samung sources
MDNIE fixes
revert a lot of patches
add lazy governor
bfq, sio, vr tweaked
latest clockworkmod recovery without touch
and a lot of other new and cool stuff
import a lot of fluxi's patches thx to him

***3.40***
wakelock: main_wake_lock fix by tungstwenty
wakelock: (tungstwenty's implementation)
Auto-brightness increased slightly from s3 ( thx hardcore )
MDNIE screen sharpness and color tuning (improves text readability) from s3 ( thx hardcore )
init.d script fix ( was my fault, i forgot to change it after update th initramfs :D )
MDNIE color tuning: reduce color saturation for Standard mode from s3 ( thx hardcore )
Remount all partitions with noatime
Remount ext4 partitions with optimizations
linux 3.0.37
update ramdisk
update ramdisk-recovery

***3.37***
sync: Add synchronization framework
sw_sync: add cpu based sync driver
sync: add timestamps to sync_pts
sync: add debugfs support
sw_sync: add debug support
sync: add ioctl to get fence data
sw_sync: add fill_driver_data support
sync: add poll support    
enable sync And sw_sync
enable conservative governor
update ramdisk
update ramdisk-recoevry


***3.33***
fix recharge issue if the phone is off
some code cleanup
update ramdisk-recovery
update conservative( thx fluxi ), interactive, smartass2 governor
some GPU default changes ( let's try again )
xz compressed

[U]i'll push new patches to github if i'm back from holiday
[/U]
***3.31***
wifi deepsleep fix
block: strict rq_affinity
block: BFQ v3-r4 IO Scheduler

***3.24***
update ramdisk
enable IP tunneling
mach-u1: THRESHOLD_BATT changes
bcmdhd: Change packet filter settings to block multicast
init:calibrate: lpj from 3.4
Makefile: add one more cflag
add optimized ARM RWSEM algorithm
power: raised polling interval andand use default charge current
ARM: hard float

***3.22***
insecure adbd
back to touch recovery
fixed backup function
update ramdisk
update ramdisk-recovery
GPU: 100MHz, 160MHz, 267MHz as default
GPU: Threshold 84% 44% 84% 64% as default
# The new GPU defaults should fix some game problems like in Samurai vs Zombies defense
Timer frequency: 300Hz
mach-u1: THRESHOLD_BATT changes
.config: enable IP tunneling

***3.20***
update ramdisk
update ramdisk-recovery
usb: gadget: storage: make FSG_NUM_BUFFERS variable size
usb: gadget: android: Honor CONFIG_USB_GADGET_VBUS_DRAW
Use 4 storage pipeline buffers
Increase vbus draw
update Ultimate kernel Cleaning Script 


***3.13***
Update busybox
AFTR || LPA as default
enable SCHED_MC
use cm recovery without touch

***3.11***
linux 3.0.36
color adjusment (color looks now more powerful)
use only 1200MHz for recovery mode
cpufreq: interactive governor: Add a time view concept 
net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog

***3.09***
linux 3.0.35
lib: introduce some memory copy macros and functions
lib: improve the performance of memcpy and memmove of the general version
bcmdhd: enable pno support, change initial scan, fixes wifi direct
net: wireless: bcmdhd: Driver update from N7000 Update 3 sources
mach-u1: Make SoC "need recal" check shut up
max17042: Make driver less chatty
sec_battery: Make driver less chatty
modem_if: Stop printing [MIF] messages
arm: remove stale export of 'sha_transform'
lib/sha1.c: quiet sparse noise about symbol not declared
sched: Don't call task_group() too many times in set_task_rq()
arm: remove "optimized" SHA1 routines
lib/sha1: use the git implementation of SHA-1
config: Set country/region code
keyboard: cypress: Ensure light is off, enable regulator only if needed
mmc: Fix file permissions from N7000 commit
mmc: Pull in N7000 Update3 mmc drivers, disable MMC_CAP_ERASE
update ramdisk-recovery
update ramdisk

***3.07***
use cfq as default
fix recovery error
linux 3.0.34
some more patches from myfluxi and cm kernel
more color adjustment

***3.05***
Linux 3.0.33
fixed wifi toggle issue
same patches from fluxi recovery
and a lot of other patches but sorry i'm very busy at time will add it later

***3.02***
linux 3.0.32
fixed ffc
aosp charger
enable IP tunneling
ubuntu/linaro 4.6.3-11ubuntu5 toolchain
ondemand governor as default
remove mfc firmware
mali: Driver update from N7000 Update 3 sources
more matches to cm kernel
add ACCESSORY_SET_AUDIO_MODE control request and ioctl 
usb: gadget: f_accessory: Add support for HID input devices
usb: gadget: f_audio_source: New gadget driver for audio output
sound: mc1n2: Prevent tick-noise when reboot menu selected
usb: gadget: composite: Fix corruption when changing configuration
sched_rt: fix SCHED_RR across cgroups
keyboard: cypress: Automatically enable BLN while charging
touchscreen: mxt224_u1: Update touch values according to power state
touchscreen: mxt224_u1: Use mxt224_ta_probe instead of writing directly 
net: wireless: bcmdhd: Fix division by 0 if dhd_watchdog_ms is 0
net: wireless: bcmdhd: Fix WPS PBC overlap failure
config: enable kernel panic timeout
max8997: Implement Accessory Charger Adapter support
mach-u1: Rework ramconsole init
Add correct microphone code for PX devices
cpufreq: Build smartassv2 as a module
and something more changes

***2.57***
tun as module
adjust touchscreen parameters
disable CONFIG_BUG
lower LOG_BUF_SHIFT 18->14
led button fadeout effect
adjust panel gamma
recovery fixes
ramdisk cleanup

***2.55***
linux 3.0.31
add brazilianwax gov
a bit more undervolting
brilliant color
sync with latest UKCS

***2.53***
BLN enabled by default
touchscreen sensitivity changes on battery
fixed adb in recovery mode
initial LED breathing effect ( thx fluxi ) needs a app update
initial LED blink function ( thx fluxi ) needs a app update too
new tweakz
color calibration

***2.52***
touchscreen fix ready
net: wireless: bcmdhd: Driver update from SHW-M250S_ICS_Opensource_Update5 ( thx fluxi )
[URL]https://github.com/pinpong/thoravukk[/URL]

****2.50***
mach-u1: solved problem with touch sensitivity
ramdisk cleanup

***2.48***
linux 3.0.30
remove wheatly governor 
remove lazy governor 
cpufreq interactive updated
re-working recovery
fixed nandroid backup
fixed led timout always off/on
vibrator level default4
power: raised polling interval and usb charge current 
Timer frequency: 300Hz 
Makefile: Compile with -Ofast
remove app from boot.img ( now you need to download in app thread [URL="http://xdaforums.com/showthread.php?t=1616426"][APP]Thoravukk Control for Thoravukk Kernel [/URL]

***2.45***
App: some fixes [COLOR="Red"]( before you flash new kernel be sure you have deinstall the old thoravukk control app )[/COLOR]
USB OTG support thx gokhan
remove debugging 
re-compiled recovery

***2.43***
Thoravukk-kernel App( beta )
better battery runtime

***2.41***
linux 3.0.29
hope we fix sod's
minore fixes
fuse.ko ntfs support 

***2.40***
revert: Switch to Gingerbread legacy hotplug
update interactive Governor
remove lot debugging and tracing
revert: 1200MHz lowered voltage
for completely chngelog check [url]https://github.com/pinpong[/url]

***2.39***
fix permission
Joe's RCU
Switch to Gingerbread legacy hotplug ([COLOR="Red"] testing[/COLOR] )
more on github [URL]https://github.com/pinpong/thoravukk/commits[/URL]

***2.37***
update ramdisk
fix for bootsplash changer
cleanup
update recovery
1200MHz lowered voltage

***2.35***
 [COLOR="Red"]now we have a great ics kernel [/COLOR]
should work now with newer and older aosp roms
more optimizations
update recovery
[COLOR="Red"]switched mountpoints for sdcards to match cm standard:
/mnt/emmc = internal storage
/mnt/sdcard = external sdcard[/COLOR]
[url]http://xdaforums.com/showpost.php?p=25027440&postcount=25700[/url]

***2.32***
same as 2.30 but will work with newer cm9 nightlys

***2.30***
back to 2.21 cpu driver and enable 1400&1600MHz ( i think i will remove 1600Mhz next version )
led_timout back to 500
more compiler optimization

***2.28***
change to stable cpu drivers. 200MHz-1400MHz
led_timeout 250 as default

***2.25***
cpu voltage fixes 

***2.24***
fix permission ( init.d should work fine now ) it will fix the VC conflict
remove 300,400,600,900MHz frequencies
stripped modules ( thx saturn_de for the good idea ) we get smaller modules
remove ext4 remount script ( it's useless )

***2.23***
CPU: Now with 16 steps ( thx homura/fluxy )
J4FS Module for custom bootlogo thx codeworkx & sakuramilk to gimme some input
more cleanup
add lippol94 kernel cleaning script
remove cleanup.sh

***2.21***
Linux 3.0.28 upgrade
recovery-ramdisk cleanup 
ramdisk cleanup
change touchscreen sensitivity

**2.19***
enable CIFS
CGROUP_TIMER_SLACK 
Add adjustable vibrator levels
Performance improvement

***2.17***
Patch to linux 3.0.27
disable pegasusq governor
set leds on for 1 secs as standard
change recovery color
set the right path for sd and sd-ext in recovery
disable more kernel debbuging
sio tuned for flash device's
set lulzactive as default

***2.16***
initramfs cleanup
hope we fix kernel_panic
Touch recovery thx sk8erwitskil
Use other way to copy liblights ( now it should work without problems )
Set sakuractive as default governer

***2.03***
init.d support
modded initramfs
add wheatley governer
add cpu overclocking thx gm
CPU Overclocking & Undervolting support thx gm
GPU Overclocking & Undervolting support thx gm
BLN auto install
Tegrak second core app support
Tegrak touch move app support
Charging voltage support thx gm
add clean-up script