I'm using viper xl 3. 0 with 1.8 GHz... Smooth as it can be...
Sent from my HTC One XL using xda premium
Hmmm what hboot? Also how you install it?
Sent from my HTC One X using xda app-developers app
I'm using viper xl 3. 0 with 1.8 GHz... Smooth as it can be...
Sent from my HTC One XL using xda premium
What would this help do?
Hmmm what hboot? Also how you install it?
Sent from my HTC One X using xda app-developers app
I'm on HBOOT 1.09 and booted into recovery and flashed it using twrp...
Sent from my HTC One XL using xda premium
Jb kernel..not a ics kernel.
Sent from my HTC One XL using xda app-developers app
---------- Post added at 07:02 PM ---------- Previous post was at 07:01 PM ----------
So I assume this only works for lower hboots for now?
Sent from my HTC One XL using xda app-developers app
To boot up? I'm using newts Rom and its deodexed yet it kept bootlooping
Sent from my HTC One X using xda app-developers app
What frequency did you pick during kernel install?
Sent from my HTC One XL using Tapatalk 2
I'm not sure exactly what happens with hboot 1.14 because I don't have it, but I know some people have trouble flashing with it.
If you install through TWRP you should get the config files, then you could do fastboot flash to get the kernel and it will work.
Okay! Uhmmm where do I find the config file after installing the kernel? I hate to ask:/
Sent from my HTC One X using xda app-developers app
/etc/elementalx.conf
But you don't need to edit it, if you go through the aroma installer and then flash the kernel in fastboot, it will use the settings you set in aroma.
/etc/elementalx.conf
But you don't need to edit it, if you go through the aroma installer and then flash the kernel in fastboot, it will use the settings you set in aroma.
v0.2 is not working for me on Newt's Sense+ ROM, but v0.1 does. I don't remember if I used v0.2 on another ROM(RebelROM) successfully prior to this. But init.d is the only difference right so why whould this happen?
Has anyone used v0.2 successfully?
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
FEATURES:
- based on HTC Sense 5 Android 4.2.2 source code
- Aroma installer
- choose CPU optimization level: vanilla, elementalx, or ultra
- optimized for extended battery life
- overclocking options
- choose max screen off frequency
- user voltage control
- choose voltage profile in installer
- GPU overclocking
- button light notification
- sweep2wake
- doubletap2wake
- pocket detection (prevents accidental wakes in pocket)
- /system writable
- force fastcharge
- NTFS r/w support
- exFAT support
- i/o schedulers: FIOPS (default), SIO
- option to disable fsync
- faux sound control support
- increased refresh rate for HDMI output via MHL adapter
- optimized -O3 linaro 4.7
DOWNLOAD
Sense 5 Android 4.2.2
ElementalX-8.3.2
mirror: http://www.androidfilehost.com/?fid=23212708291674213
If you experience cell signal drops and reboots, you need the latest firmware and matching radio.
Earlier versions
ElementalX-7.0.2
Previous releases:
ElementalX-6.7
ElementalX-6.6
ElementalX-6.5
ElementalX-6.4
ElementalX-5.4
ElementalX-5.2
ElementalX-JB-v2.5: http://goo.gl/I9DHA
Please hit the Thanks button if you download this
If you really like it, please consider buying me a beer
Actually, I won't spend it on beer. I'm saving it all up to buy my next device
Thanks to those who have donated!
INSTALLATION
1. Install zip from TWRP Recovery
2. Follow the instructions, if you don't know what to do, use the preselected option
3. Reboot!
S-OFF required!
First boot will take a while. Let it load all the way, then let it settle in for a few minutes, then reboot again.
FAQ
Q. I installed ElementalX and now I'm stuck in a bootloop
A. Go to this thread and get S-OFF: http://xdaforums.com/showthread.php?t=2155071
Q. I installed ElementalX and now my phone is laggy/sdcard is corrupt/camera doesn't work/other random problem not related to the kernel
A. Please don't fill up my thread with vague complaints. As long as you pick reasonable voltage and frequency settings, this kernel is 100% stable and problem free. I know what I'm doing and I don't do anything to the kernel that will mess up your phone. If you have problems, it's because of something else you've done. If you think you've found a bug with the kernel, please include dmesg output or /proc/last_kmsg
Q. I installed ElementalX and I get random reboots
A. If the reboots occur when your phone is idle, increase your voltage or increase your max screen off frequency. If the reboots occur while you are using the device, scale back your overclock and/or increase voltage. If all else fails, choose the vanilla option.
Q. What if I am still having problems?
A. If you are having problems the key to getting help is to provide appropriate detail.
Number 1: Description of your issue
I'm most cases people in this thread will try and help you. The more information, the better chance someone in the thread will be able to help you.
If you can't be helped by one of the experienced ElementalX users it would generally be referred to the dev
Number 2: Details of installation options e.g.
- ElementalX 6.5 Vanilla
- CPU Max: 1.7ghz
- CPU Min: 384mhz
- GPU OC: On
- S2W: On
- fsync: On
- Zram: On
Number 3: Logs, refer to the following details on gathering appropriate logs
In the below example the adb path is c:adb
Open command prompt type cd c:adb
The following two commands can be used to provide logs to help troubleshoot slowdown/freezing issues.
adb shell top -n 1 > c:top.txt
adb shell dmesg > c:dmesg.txt
If you experience a non-user initiated reboot please follow the below steps to provide last_kmesg
* After reboot issue is encountered boot to recovery
* use the file manager to copy /proc/last_kmsg to sdcard/download/
* mount usb and copy it to your computer
* zip it
* post it with details of your issue in this thread.
* restore your nandroid and boot into your last stable config
CHANGELOG:
Sept 26, 2013 - ElementalX-8.3.2
-fix fsync setting
-fix BLN setting
-battery saving and speed tweaks
Sept 22, 2013 - ElementalX-8.2
-compile with linaro 4.7
-fix touches registering during calls with sweep2wake
-update installer
-start fresh with HTC 4.2.2 source
-remove zram
-remove 192 min freq
-default governor is ondemand
-default i/o scheduler is fiops
August 18, 2013 - ElementalX-7.0.2
-fix installer
-fix init.d support
August 17, 2013 - ElementalX-7.0.1
-fix installer
August 16, 2013 - ElementalX-7.0
-remove OTG whitelist to enable more devices
-build with Linaro 4.8
-add TCP congestion control algorithms
-enable Netfilter XT target log support
-update installer
May 26, 2013 - ElementalX-6.7
-dt2w works with buttons
-no pocket detection when screen is on
-fix fm radio
-revert autogroup: group by current UID
May 17, 2013 - ElementalX-6.6
-add DoubleTap2Wake (DT2W)
-add button light notification (BLN)
-enable/disable pocket detection
-pocket detection (prevent accidental wakes with s2w and dt2w)
-enable/disable s2w and dt2w separately
-add faux sound control support (untested)
-other minor tweaks and fixes
April 5, 2013 - ElementalX-6.5
-modification to work with SD Manager in ViperXL 3.2.7
April 5, 2013 - ElementalX-6.4
-correct oc frequencies
-adjust l2 cache frequencies
-gpu overclock frequencies now 480 3D and 266 2D
-fix max screen off limit
-various patches from Linaro and CAF
-WiFi module fix (thanks thicklizard)
-avoid loadavg moire
-enable automatic process group scheduling
-max screen off frequency can be disabled
March 13, 2013 - ElementalX-5.4
-optimized build compiled with -O3
-linaro 4.6.3 -> linaro 4.7.3
-force ac for unknown chargers
March 10, 2013 - ElementalX-5.3
-re-add use glibc memcpy
-re-add use glibc string
-adjust dirty_background_ratio = 10
-adjust vm_dirty_ratio = 20
-revert fudgeswap
-revert minfree stats
-tweak clock settings
-add /dev/frandom
-add force fastcharge
March 3, 2013 - ElementalX-5.2
-review and clean up code
March 1, 2013 - ElementalX-5.1RC
-tweak GPU settings
-change installer defaults
-made sure that if you flash boot.img in fastboot you get vanilla version
February 26, 2013 - ElementalX-5.0.6-beta
-add another CPU optimization setting (Ultra)
-switch do_fsync() to fget_light()
-adjust readahead to 2048
-tweak GPU clock settings
February 24, 2013 - ElementalX-5.0.5-beta
-updated aroma installer
-CPU optimization options: Vanilla or ElementalX
-zram enabled by default
-small tweaks to GPU settings
-fstrim at boot
February 23, 2013 - ElementalX-5.0.4-beta
-dual zram
-use zcache instead of qcache
-use zsmalloc instead of zxmalloc
-CPU1 governor can be set independently
-set max screen off frequency
-choose 192 or 384 minimum CPU frequency
-update cpupower according to cpu load
February 21, 2013 - ElementalX-5.0
-fix installer conflicts
-option to install new ElementalX bootsplash
-option to install HTC bootsplash
February 19, 2013 - ElementalX-v4.5beta
-default i/o scheduler is now ROW
-add fix for crash when wp_mod.ko loaded
-add fudgeswap
-disable gentle fair sleepers
-xz kernel compression
February 17, 2013 - ElementalX-v4.4beta
-add lionheart, badass governor
-add row i/o scheduler
-adjust l2 cache frequencies
-re-add 200MHz step for 2d GPU (ElementalX-v4.4beta only)
-remove smartassv2 (broken)
February 16, 2013 - ElementalX-v4.3beta
-based on HTC source code 3.17
-overclock to 2.1GHz
-minimum frequency 192MHz
-optional overclock GPU
-full voltage control
-enable/disable fsync
-intellidemand default governor
-fiops default scheduler
-add sweep2wake
-add zRam with snappy compression
-init.d support
-ntfs r/w support
-fix HDMI refresh rate
February 3, 2013 - ElementalX-JB-v2.5
-added 384 MHz frequency step when selecting 192MHz as min frequency (needed because CPU1 will not stay at 192MHz)
-adjustments to init script
-option to install extra governors (lionheart, lagfree, interactivex2, and badass)
January 26, 2013 - ElementalX-JB-v2.2
-choose minimum CPU frequency (192MHz or 384MHz)
-option to leave minimum voltage at default
-optimized CPU control module, now reads PVS efuse and sets appropriate voltage levels
-streamlined options and config file
-optional XBox controller support
January 21, 2013 - ElementalX-JB-v2.1
-Option to completely disable overclocking/undervolting
-If overclocking, choose between optimization for stability or performance
-stability option does not increase L2 cache frequency and bus bandwidth
January 20, 2013 - ElementalX-JB-v2.0
-added intellidemand governor (default)
-added fiops i/o scheduler (default)
-optional zram with snappy compression
-optional ntfs r/w support
-select minimum voltage (800, 825, 850, 875, or 900mV)
-added 1134 and 1242 MHz underclocking options
-increased bus bandwidth
-many changes to installer and configuration files
January 14, 2013 - ElementalX-JB-v1.5
-minor fixes to init script
January 12, 2013 - ElementalX-JB-v1.4
-fix low 3D GPU setting
-undervolt option now undervolts 384MHz frequency step to 800mV
-boost L2 cache frequency for extra performance
-increase readahead buffer to 4096
January 8, 2013 - ElementalX-JB-v1.3
-added voltage options
January 2, 2013 - ElementalX-JB-v1.2
-removed 1998MHz frequency step
-added 1647MHz frequency step
-increased voltages slightly for stability
-added option to install without boot.img
January 1, 2013 - ElementalX-JB-v1.1
-minor tweaks to install method
-adjust lowmemorykiller
December 31, 2012 - ElementalX-JB-v1.0beta
-same max freq for both CPUs
December 29, 2012 - ElementalX-JB-v0.4alpha
-new overclocking method
-more frequency choices, underclock or overclock
-option for completely stock CPU
-increased overclock voltages
December 28, 2012 - ElementalX-JB-v0.3alpha
-enable system write
December 24, 2012 - ElementalX-JB-v0.2alpha
-overclock to 1998MHz