I do not have that issue. used OSB on Vista, 7 and presently 8.
[WP7 KITCHEN] OS Builder V1.4.236 FULL (01.12.2012)
- Thread starter -=Barin=-
- Start date
7.10.8858.136-7.10.8860.142
After applying both updates (8860 and 8862) into my kitchen I noticed that I lost the possibility to sync my gmail contacts, I solved that by not importing SyncApps and SyncPlatform into my kitchen, you can find SyncApps and SyncPlatform in the 8860 cab, and yes I know there is another solution to sync my gmail contacts but I don't see any difference when I leave those pkg's out of the rom.
Greetz,
After applying both updates (8860 and 8862) into my kitchen I noticed that I lost the possibility to sync my gmail contacts, I solved that by not importing SyncApps and SyncPlatform into my kitchen, you can find SyncApps and SyncPlatform in the 8860 cab, and yes I know there is another solution to sync my gmail contacts but I don't see any difference when I leave those pkg's out of the rom.
Greetz,
The MSI spits out an error about a DLL required for install not being able to run. I am on Windows 8 and trying to install the 1.4.236 version. Any help?
Thank you very much, This is exactly my problem, which I can't build my rom (OSbuilder has stop working). This error now is resoluted by the way you public. Thanks again!
os.nb.payload:
IMGFS signature not found
what does it mean?
HELP!
it show me that when I dump Ultrashot's ROM!
IMGFS signature not found
what does it mean?
HELP!it show me that when I dump Ultrashot's ROM!
To make it simple, probably a rom "protected" against dumping.os.nb.payload:
IMGFS signature not found
what does it mean?
it show me that when I dump Ultrashot's ROM!
OsBuilder is a tool which uses a stock rom as a source. Never try to dump custom roms especially if these roms came from OsBuilder developers team members.
include cab updates in my custom rom
Hi everyone, 3 weeks ago i was totaly noob in winphone world, i've read many xda threads, but i cant find the details about what i'm trying to do.
My goal is only unlock sideload, thanks to xda(registry infos, etc...) , OSbuilder and DppImplant, this is done but updates remove the sideload unlock as expected, then ofcourse i need to include cab updates in my custom rom.
I've read this thread and seen posts of people doing that. I would like to know please how to do same.
I can get the cab links as described in the forum, but don't know where i will have to add the cabs, in SYS ? in EXT ? in OEM ? And i'm not sure if this question is logic.
Ofcourse i've downloaded and watched x-times the video tutorials about packages, but that didnt helped me
I'm sure i'm missing something to really understand packages management in OsBuilder.
I've seen a post on this thread talking about windowsupdate cabs update and dsm, but i'm affraid i don't really understand dsm files
If someone could please describes the main steps to achieve this goal, it will be very nice. (links to threads are welcome, since i'm sure this question has been already asked, but can't find where)
(and last question : there is a way to be sure that the wp cab updates will be applied first ? Because my registry sideload unlock is just a modification of the exisiting registry values in the rom (official one))
If aditional infos are needed to answer , don't hesitate.
(Lumia 800 : advanced config/wp7roottools dosent work on my device to prevent relock )
Thx in advence !!!!!!!!!!
Sorry long post.
EDIT: hi, i've uncompressed the cab update files, then uncompressed the multiple cab.pku and cab.pkg, things becomes to look like the video tutorial called 02-grouping.avi, i think i can try things to achieve my goal
I keep you informed about my progress, got to test some things...(but what makes me affraid is the number of packages that are being updated, this will take some time )
Hi everyone, 3 weeks ago i was totaly noob in winphone world, i've read many xda threads, but i cant find the details about what i'm trying to do.
My goal is only unlock sideload, thanks to xda(registry infos, etc...) , OSbuilder and DppImplant, this is done but updates remove the sideload unlock as expected, then ofcourse i need to include cab updates in my custom rom.
I've read this thread and seen posts of people doing that. I would like to know please how to do same.
I can get the cab links as described in the forum, but don't know where i will have to add the cabs, in SYS ? in EXT ? in OEM ? And i'm not sure if this question is logic.
Ofcourse i've downloaded and watched x-times the video tutorials about packages, but that didnt helped me
I'm sure i'm missing something to really understand packages management in OsBuilder.
I've seen a post on this thread talking about windowsupdate cabs update and dsm, but i'm affraid i don't really understand dsm files
If someone could please describes the main steps to achieve this goal, it will be very nice. (links to threads are welcome, since i'm sure this question has been already asked, but can't find where)
(and last question : there is a way to be sure that the wp cab updates will be applied first ? Because my registry sideload unlock is just a modification of the exisiting registry values in the rom (official one))
If aditional infos are needed to answer , don't hesitate.
(Lumia 800 : advanced config/wp7roottools dosent work on my device to prevent relock
)Thx in advence !!!!!!!!!!
Sorry long post.
EDIT: hi, i've uncompressed the cab update files, then uncompressed the multiple cab.pku and cab.pkg, things becomes to look like the video tutorial called 02-grouping.avi, i think i can try things to achieve my goal
I keep you informed about my progress, got to test some things...(but what makes me affraid is the number of packages that are being updated, this will take some time
)
Last edited:
still trying to include cab update files in my custom ROM
Hi everyone,
still stuck since my previous post.
due to the number of packages inside the 4 update cabs i want to include inside my custom rom, i deceided to try to not uncompress the cab files before include them with osbuilder.
what i've done : i created separate folders inside oem folder, one for each wp update with an empty dsm file that is fixed by osbuilder, added the packages in cif and sof packages editor (at last position)
added the rgu with dsm i need to sideload unlock my lumia 800 at bottom of packages.
i flashed my phone and... updates are not applied
i really need some theorical help plz.
anyone ? even just a link ? (forum's search always send me either nothing, either 4353450 results to my requests...)
spent too many energy for dload=>qualcomm now seems i'm too tiered to do things wich i have the right tool for(osbuilder).
i cross fingers for an usefull answer.
Hi everyone,
still stuck since my previous post.
due to the number of packages inside the 4 update cabs i want to include inside my custom rom, i deceided to try to not uncompress the cab files before include them with osbuilder.
what i've done : i created separate folders inside oem folder, one for each wp update with an empty dsm file that is fixed by osbuilder, added the packages in cif and sof packages editor (at last position)
added the rgu with dsm i need to sideload unlock my lumia 800 at bottom of packages.
i flashed my phone and... updates are not applied
i really need some theorical help plz.
anyone ? even just a link ? (forum's search always send me either nothing, either 4353450 results to my requests...)
spent too many energy for dload=>qualcomm now seems i'm too tiered to do things wich i have the right tool for(osbuilder).
i cross fingers for an usefull answer.
it's sad this waste of time
tool> apply update was my answer
that's all.
that was not difficult to find, neither difficult to post this answer...
so much waste of time to reverse eng the pku system update, to finally find osbuilder includes a tool to do it...
thx for the guy(s) that created osbuilder, no thx to others for no answer
things changed around here...
tool> apply update was my answer
that's all.
that was not difficult to find, neither difficult to post this answer...
so much waste of time to reverse eng the pku system update, to finally find osbuilder includes a tool to do it...
thx for the guy(s) that created osbuilder, no thx to others for no answer
things changed around here...
Cherches bien sur xda, et tu trouveras des tutos qui devraient t'intéresser.tool> apply update was my answer
that's all.
that was not difficult to find, neither difficult to post this answer...
so much waste of time to reverse eng the pku system update, to finally find osbuilder includes a tool to do it...
thx for the guy(s) that created osbuilder, no thx to others for no answer
things changed around here...
Il y en a même sur des forums français, puisque tu est français ...
Looking on xda and you will find some tutorials that should interest you.
There are even on french forums, since you are French...
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
108Hi all!
I want to present the tool which can port/rebuild XIP (NK) and build IMGFS partition file for Windows Phone 7 with real registry recompiling and relocations according to WP7 memory model.
It can also build NB (D000FF and WMSTORE containers) and NBH files for HTC WP7 devices (tested on HTC HD2, HTC HD7, HTC Mozart, HTC Radar, HTC Titan).
This thread is the continuation of OSBuilder for WM topic. The future discussion about WP7 ROM assembling by means of OsBuilder will take place over here
Thanks again to the team (AndrewSh, Feropont, Vladimir1973, lucifer3006) - for the support, for the tests, for your work!
Special thanks to HD2Owner for enthusiasm and his titanic work in testing WP7mode.
Thanks a lot to AnDim for his tenderness and important information provided.
Sincerely,
Barin and Ultrashot
Tutorial videos:
How to dump NBH
How to work with registry
How to work with packages.sof/packages.cif
to be continued...
[POLL] What new features do you want to have in OsBuilder future releases
27Changelog links:
Changelog - OS Builder V1.4.236 FULL (01.12.2012)
Changelog - OS Builder V1.4.235 FULL (25.11.2012)
Changelog - OS Builder V1.4.234 FULL (22.11.2012)
Changelog - OS Builder V1.4.223 FULL (02.10.2012)
Changelog - OS Builder V1.4.209 FULL (19.05.2012)
Changelog - OS Builder V1.4.206 FULL (21.04.2012)
Changelog - OS Builder V1.4.205 FULL (16.04.2012)
Changelog - OS Builder V1.3.199 FULL (09.12.2011)
Changelog - OS Builder V1.3.189 FULL (08.11.2011)
Changelog - OS Builder V1.3.187 FULL (03.11.2011)24Changelog - OS Builder V1.3.187 FULL (03.11.2011)
1. Fixed issue with deleting a parameter defined in boot.rgu, if the removing directive was stored in other packages - the post http://xdaforums.com/showpost.php?p=18251257&postcount=564
The second step to full WP7 support
2. Relocation engine is totally redesigned. (Hats off to Ultrashot for valuable help with WP7 modules Z .reloc sections)
3. Added possibility of porting/rebuilding XIP (NK) and the assembling IMGFS partition file for Windows Phone 7 with real registry recompiling and relocations according to WP7memory model (tested on HTC HD2, HTC HD7 and HTC Mozart. Credit for tests goes to Feropont and HD2Owner)
I want to warn that the registry files have to be checked by registry preview, because there is a hell of syntax errors in the original registry. Frankly, it seems (IMHO) that first the registry was generated and then some comments for dumb and mistakes were added.
Registry Preview will define incorrect lines to help you to fix that. The most common errors are:
- Parameter name without the quotes
- The comments are not marked with a semicolon or marked with colon.
- HEX type values end with point (the last or the only parameter line)
- The value MULTI_SZ contains comments between the lines parameter
- Existence of Directives for conditional compilation IF ... END (it's not a mistake, but currently these directives are not processed, so you should label them as a comment)
4. The dsm-editor has now the feature to set/clear Z-flags for modules.
Warning! This flag is used for WP7 XIP modules only if the RW section of a module must be located within the boundaries of RAMStart-RAMFree (nk.exe, kernel.dll, kitl_noplat.dll and similar)
5. For WP7 - Added ability to edit the file MsDefaultcerts.dat (see Additional Tools)
6. For WP7- Added ability to edit files CoreOS.dat and initobj.dat (see Additional Tools)
7. Added ability to automatically insert a certificate which will sign files while assembling DefaultCerts.dat and MsDefaultCerts.dat (for WP7) - see the settings in Build Dump and ROM. The original files stay untouched.
8. XIP Port settings - added the list of additional MS packages (for WP7). When porting WP7 XIP, the packages specified in this list will be replaced with donor packages.
At the moment, we can safely add the following packages to this list:
BaseDrivers_NK
CCFGSVC
GFX_NK
KFPCRT
Watson_Core
WinCENLS
9. In Configuration and packages tab of Setting - added the option "Always include 0409packages." If your WP7kitchen allows the language selection, it is recommended to use this option enabled to include English-language packages by default to your ROM, otherwise there is risk to get non-bootable ROM.
10. Added - the ability to build NB files (! For the moment only D000FF container !, NB assembling for the new _wmstore structure devices is not supported yet) and NBH files for WP7
To build NB you should have the original NB and should define the way to it in Build ROM settings, for example ".\NB\OS.nb". Unfortunately, to get rid of the original NB is not yet possible, but the work is in process. Hats off to AnDim for help and information provided. NBH build configuration settings are similar to the previous version, except that the CID tab can contain multiple values (each value in a separate line)
Warning! If you plan to use for cooking WP7 dump obtained by earlier versions of OSBuilder, I would strongly recommend you to dump again, and to copy the new ROM template \ ROM.tpl to your kitchen. The new template will contain additional service information, which was not recorded in earlier versions of OSBuilder
11. OSBuilder is fully backward compatible with WM6.x kitchens, (it was a big deal btw, but it was implemented). When you open the kitchen OSBuilder automatically detects the required mode WM6/WP7.
This compatibility will remain for the future, but no new features for WM kitchens will be added. OSBuilder WM Kitchens Development is terminated due to the termination of WM6.5.x development from MS side.
Thanks again to the team (AndrewSh, Feropont, Vladimir1973) - for the support, for the tests, for your work!
Special thanks to HD2Owner for enthusiasm and his titanic work in testing WP7mode.
Thanks a lot to AnDim for his tenderness and important information provided.
Sincerely,
Barin and Ultrashot18OSBuilder V 1.4.205 (16.04.2012) changelog:
1. New settings form
2. More responsive UI
3. WMSTORE rom format support.
4. Significantly updated D000FF support. Thanks, Andim! !!!Be VERY careful with maximum ROM size!!!
5. Automatic o32_dataptr fixing - important for system updates
6. WP7 DSM support improved. New module size calculation subroutine.
7. WP7 page pool changing support. (!) You have to keep original not patched NK, otherwise pool won't be changed during building.
8. Package file browser performance improved.
9. Simple algorithm against ROMs with hexed headers added. No need to use such protections anymore.
10. Language packages sorting function added to CIF/SOF editor.
11. RGU: Now OSB ignores most of errors OEMs and MS got used to.
12. SLDR certs edit button.
ATTENTION! There are some new settings for D000FF generator! Please open settings window, check all settings (ROM files and formats) and the save settings.17OSBuilder V 1.4.223 (02.10.2012) changelog:
1. "Copy path to clipboard" item is added to Package context menu.
2. Files with nbh, nb, esco, nb0, payload, ffu extensions are associated with Dump Tool. Warning! Dump Tool works only with FFU WP7 files. All attempts to open FFU WP8 files will return error.
3. For WP7 second generation devices: logo file generator is added to Tools/Built-In.
4. Added ability (Additional tools) to view the policy.xml files (like provxml files - processing order and editing)
5. Added context menu of the kitchen root folder path (lower left corner of the main window) – possibility to open in a file manager or the command line, also possibility to copy the path to the clipboard
6. DSM Editor: added ability to set flags Boot hive and Allow Downgrade. Also added the opportunity to set the flags DIFF and DEL for FileEntry
7. In Tools/Built-In: added Cab Builder, allowing to create Cab file from the folder with files and to sign it with the certificate.
8. In Settings: changed an option to automatically include 0409 packages to rom. Now it's 0409/0809
9. A hell of internal changes in routines of processing and assembling
New posts
-
-
Development [dubai][OFFICIAL][Android 13] The XPerience Project 17
- Latest: rohan.irani2
-
