[DEV] CyanogenMod 9.1 / CyanogenMod 10 by MacławStudios (update: 02.09.2012)

Status
Not open for further replies.
Search This thread

nesaja83

Senior Member
Dec 4, 2011
68
52
then u have to wait when the guys fix the errors with rebooting and flight modus...


does everyone got this? and running in flight modus or is it just me and you and a few others?
 
  • Like
Reactions: Xardonor

marcin1147

Senior Member
Dec 29, 2011
378
2,100
Install Android SDK on PC, turn off your phone, plug usb cabble to PC, type "adb logcat > output.txt" in terminal, turn on your phone, post output.txt on forum :)
 
Last edited:
  • Like
Reactions: Xardonor

eightballbill

Member
Dec 19, 2011
25
15
If the problem is in the network - phone interface, this problem could be related to the baseband. Could you please tell us which baseband you have installed?

ITALIAN:
Ciao agli italiani sul forum. Se il problema riguarda la rete mobile, potrebbe essere un problema di incompatibilita' con la banda base installata sul telefono.
Ditemi che banda base avete installata (andate su info telefono alla voce banda base, il tutto dal menu' impostazioni)
 
Last edited:
  • Like
Reactions: Xardonor

nesaja83

Senior Member
Dec 4, 2011
68
52
If the problem is in the network - phone interface, this problem could be related to the baseband. Could you please tell us which baseband you have installed?

ITALIAN:
Ciao agli italiani sul forum. Se il problema riguarda la rete mobile, potrebbe essere un problema di incompatibilita' con la banda base installata sul telefono.
Ditemi che banda base avete installata (andate su info telefono alla voce banda base, il tutto dal menu' impostazioni)

stock baseband S5660XXKPA 2.3.3 ---> GY 7.2

dunno the baseband cause bussy with logs.

tell me which u runs which dont auto reboots, so i can try it out
 
Last edited:
  • Like
Reactions: Xardonor

mauri90

Senior Member
Jun 19, 2011
65
36
Bari
If the problem is in the network - phone interface, this problem could be related to the baseband. Could you please tell us which baseband you have installed?

ITALIAN:
Ciao agli italiani sul forum. Se il problema riguarda la rete mobile, potrebbe essere un problema di incompatibilita' con la banda base installata sul telefono.
Ditemi che banda base avete installata (andate su info telefono alla voce banda base, il tutto dal menu' impostazioni)

finalmente un italiano, grazie mille per la risposta, ho pensato anche io fosse quello il problema perchè nella prima pagina la versione banda base è diversa dalla mia, comunque la mia versione di banda base è: S5660XXKQ5
sai come risolvere questo problema?
 
  • Like
Reactions: Xardonor

eightballbill

Member
Dec 19, 2011
25
15
Ok, if i remember correctly, most of developers are using xxks2 or above. You should try installing giopro 1.4 or any other firmware providing a newer baseband(you can go to sammobile forums in the gio section, there you can find all the latest firmwares) flash one of these using odin (not CWM, Odin, this is important, as there's no other method to install the baseband other than odin), and then reflash all the packages (cwm -> cm7.2 -> cm9). I suggest you to go to the giopro v1.4 topic in this forum and follow the instructions.

---------- Post added at 01:20 PM ---------- Previous post was at 01:13 PM ----------

finalmente un italiano, grazie mille per la risposta, ho pensato anche io fosse quello il problema perchè nella prima pagina la versione banda base è diversa dalla mia, comunque la mia versione di banda base è: S5660XXKQ5
sai come risolvere questo problema?
Allora, non no so come risolverlo, in quanto non installo mai rom in una fase cosi' iniziale dello sviluppo, sono troppo instabili. TI traduco quanto consigliato in inglese nel post precedente. Fossi in te proverei a mettere la stessa banda base degli sviluppatori e vedere cosa succede, ma non garantisco chiaramente. Prova a flashare con odin un firmware con una banda base piu' moderna della tua, ti consiglio una stock 2.3.5 da sammobile oppure la giopro 1.4, credo vada bene lo stesso. A quel punto ripeti tutta la procedura di installazione, dalla cwm al pacchetto presente all'inizio di questo topic. Ripeto, non garantisco, ma a fiuto mi sembra una procedura sensata. Facci sapere se tutto va a buon fine. Mi raccomando segui tutte le guide/tutorial per le procedure, e' molto importante, altrimenti rischi di distruggere il telefono.
Ciao.
 

gnekt

Member
Oct 20, 2011
42
13
Caserta
finalmente un italiano, grazie mille per la risposta, ho pensato anche io fosse quello il problema perchè nella prima pagina la versione banda base è diversa dalla mia, comunque la mia versione di banda base è: S5660XXKQ5
sai come risolvere questo problema?

Ok, if i remember correctly, most of developers are using xxks2 or above. You should try installing giopro 1.4 or any other firmware providing a newer baseband(you can go to sammobile forums in the gio section, there you can find all the latest firmwares) flash one of these using odin (not CWM, Odin, this is important, as there's no other method to install the baseband other than odin), and then reflash all the packages (cwm -> cm7.2 -> cm9). I suggest you to go to the giopro v1.4 topic in this forum and follow the instructions.

---------- Post added at 01:20 PM ---------- Previous post was at 01:13 PM ----------


Allora, non no so come risolverlo, in quanto non installo mai rom in una fase cosi' iniziale dello sviluppo, sono troppo instabili. TI traduco quanto consigliato in inglese nel post precedente. Fossi in te proverei a mettere la stessa banda base degli sviluppatori e vedere cosa succede, ma non garantisco chiaramente. Prova a flashare con odin un firmware con una banda base piu' moderna della tua, ti consiglio una stock 2.3.5 da sammobile oppure la giopro 1.4, credo vada bene lo stesso. A quel punto ripeti tutta la procedura di installazione, dalla cwm al pacchetto presente all'inizio di questo topic. Ripeto, non garantisco, ma a fiuto mi sembra una procedura sensata. Facci sapere se tutto va a buon fine. Mi raccomando segui tutte le guide/tutorial per le procedure, e' molto importante, altrimenti rischi di distruggere il telefono.
Ciao.
è finalmente degli italiani ..se avete problemi contattatemi
 
  • Like
Reactions: Xardonor

mauri90

Senior Member
Jun 19, 2011
65
36
Bari
Ok, if i remember correctly, most of developers are using xxks2 or above. You should try installing giopro 1.4 or any other firmware providing a newer baseband(you can go to sammobile forums in the gio section, there you can find all the latest firmwares) flash one of these using odin (not CWM, Odin, this is important, as there's no other method to install the baseband other than odin), and then reflash all the packages (cwm -> cm7.2 -> cm9). I suggest you to go to the giopro v1.4 topic in this forum and follow the instructions.

---------- Post added at 01:20 PM ---------- Previous post was at 01:13 PM ----------


Allora, non no so come risolverlo, in quanto non installo mai rom in una fase cosi' iniziale dello sviluppo, sono troppo instabili. TI traduco quanto consigliato in inglese nel post precedente. Fossi in te proverei a mettere la stessa banda base degli sviluppatori e vedere cosa succede, ma non garantisco chiaramente. Prova a flashare con odin un firmware con una banda base piu' moderna della tua, ti consiglio una stock 2.3.5 da sammobile oppure la giopro 1.4, credo vada bene lo stesso. A quel punto ripeti tutta la procedura di installazione, dalla cwm al pacchetto presente all'inizio di questo topic. Ripeto, non garantisco, ma a fiuto mi sembra una procedura sensata. Facci sapere se tutto va a buon fine. Mi raccomando segui tutte le guide/tutorial per le procedure, e' molto importante, altrimenti rischi di distruggere il telefono.
Ciao.

niente, ho provato a fare quello che mi hai detto ma comunque mi ha lo stesso problema, continui riavvii, domani provo a fare questo logcat, speriando i riuscirci.
comunque ti ringrazio per la risposta davvero.

nothing, I tried to do what you told me but I have the same problem, continues reboot, I try to do this logcat tomorrow, hope for succeeding.
however, I thank you for the answer really.
 
Last edited:
  • Like
Reactions: Xardonor

shuegig

Senior Member
Aug 21, 2011
551
30
LaLaLa land :)
niente, ho provato a fare quello che mi hai detto ma cmq mi ha lo stessto problema, continui riavvii, domani provo a fare questo logcat, speriando i riuscirci.
comunque ti ringrazio per la risposta davvero.

Can you all speak English please? Or use Google translate? Its getting really irritating for ppl who don't know what's going on :(

Sent from the GUN in my pants:)
 
  • Like
Reactions: Xardonor
M

Macław

Guest
@Maclaw
If i upload finnish xml's from framework, could you replace the existing ones? because finnish translation is really bad.

Sent from my GT-S5660
Sure, send it to me at PM. I'll add it.

Ok ok ok in airplane modus.... NO REBOOTS,FASTER SCROLL SPEED IN APPS AND WIDGETS LESS LOADING TIME

There must be a solution for this prob.... network yes
Try to change your BASEBAND to S5660XXKS2. I'll try to do CWM package with this baseband ;-)

genuinely do not understand much about these things, could you give me an easier way to get the logcat?
It's developer preview version, not alpha or beta. If you don't know how to dump logcat or you don't want to learn it, please, don't install this rom!
 

mauri90

Senior Member
Jun 19, 2011
65
36
Bari
I know that I did not say that I want to learn, because I am the logcat I am creating. respond so do not understand why, it seems that only in the way but I just want to help in improving the rom, I know that is not even an alpha or a beta, but there is no need to heat up so much.
 
  • Like
Reactions: Xardonor

ddiel

Member
Feb 22, 2011
34
10
Palembang
(CM9 devs-preview build2)

[report]
1. if i charge when phone off, it will phone on.
2. vibrate on unlock screen still enable when haptic feedback already uncheck (so I use 3rd-app "vibrafix" from market to disable vibration on unlock screen)
3. can't set time zone
4. the keyboard looks truncated

okay, That's all I can report now. :D
nice works for all team CM9-Gio. Many thanks for this ROM ;)
 
Last edited:
  • Like
Reactions: Xardonor
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 78
    Patch for CyanogenMod 9

    here's some report from me

    Tested & Working:

    • RIL
    • proximity
    • touchscreen with multi touch (but it'll give alot of warning on logcat. trying to disable them)
    • gps
    • compass (please test)
    • accelerometer for autorotate
    • 4 pin headset + button (like from samsung)
    • microphone
    • root & busybox
    • call & sms
    • packet data with 2G(GPRS/EDGE) & 3G (UMTS/HSDPA)
    • wifi
    • bluetooth
    • USB mass storage
    • wired & hotspot tether *

      * wired & hotspot tether use 3rd application. u can download from this post's attachment

    Not Working:
    • 3 pin headset (must have ICS source to fix it)
    • hardware acceleration (our gpu libraries from gingerbread is not 100% working on ICS. and qualcomm isnt release libraries for ICS yet)
    • camera (problem with HAL)
    • FM Radio
    • BLN (liblight from gingerbread is not working. need to recompile liblight with some modification for BLN. the problem is i dont have ICS source)
    • find bug? just report it ;)

    PATCH FOR CYANOGENMOD 9​
    I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE BECAUSE FLASHING IT


    NOTE: Start from patch-cm9-v3. i'm not provide move some system app to user app because it make patch size 14mb bigger.
    if you fresh installed this rom (not yet applied patch) and want to free some space on /system partition then you need to install patch-cm9-v2 first and then install the latest patch


    patch-cm9-v3
    [Download]
    Changelog:
    • disable setupwizard. because cause problem in some user
    • trying to patch surfaceflinger to decrease lag. but still failed
    • update egl libraries
    • fix error while charging in off condition. now u can charging when phone turn off
    • fix frame buffer issue on kernel, now we have more color & better color depth.
    • fix swap, now really working on my device

    patch-cm9-v2
    [Download]
    Changelog:
    • added genlock feature to kernel
    • added zram (compcache) to kernel
    • patch video decoder driver
    • change all module on /system/lib/modules to work with our kernel version
    • added support to swap
    • added bugfix on S2E *not sure S2E work or not on this ROM*
    • change density to 150 for better view & match keyboard
    • fix autorotate sensor
    • fix sensors *please test*
    • change bootanimation
    • update usbstorage app, thx to bexton
    • enable setupwizard
    • move some system application to user application to give more freespace on /system (youtube,maps & videoEditor)
      let me know, if you found bug because moving these to user applicaton.
      [*] Dont forget to mount /system & /data from cwm before flash it
      [*] after flash it, please open root explorer & go to /system/etc/init.d/02gio and change permission to rwxr-x---. sorry i forgot to change it :p

    patch-cm9-v1
    [Download]
    Changelog:
    • fix touchscreen
    • fix flickering
    • add netfilter support for native data usage report
    • add IPV6 support
    40
    Thread cleaned once again.
    If you appreciate Maclaw's work, don't reply to his post saying "thanks", just hit the thanks button, easy as that.
    Stay on topic and quit the spamming.

    Thank You.
    39
    what happened to that mod who was threatening people 10 or 20 pages of spam ago?

    I have a real life and don't spend my days trawling for spam. If you see spam report it, I will get rid of it asap.

    As for those who keep spamming this thread, well done, you got it closed.

    Maclaw - PM me when you have and update to add & I will re-open it.

    EDIT - Also members of Maclaws Development Team, if you have any updates PM me and I will reopen it for you too.
    36
    Last error is fixed :)
    31
    And here we go again......
    THREAD CLOSED FOR CLEANING x2.

    EDIT:
    Deleted off-topic posts and cleaned the thread once again.
    If a person asks about something inappropriate, just report the post. There's no need for two pages with discussion ;)

    YZ.