MutiTool - Swiss army knife - MUST have for Newbies. 17Menu >300 choices. believe it!

Search This thread

dr.ketan

Recognized Developer / Recognized Contributor
MutiTool - Swiss army knife - MUST have for Newbies. 17Menu >300 choices. believe it!

MutiTool Advaced - Swiss army knife - All in One Tool is on post#3

MutiTool Basic- Swiss army knife - MUST have tool for Newbies.

This is for N7100 only, N7105 user look here.

Glad to announce a utility tool - MultiTool.
This is state of the art must have tool for all newcomers. You can manage following things with it.

- Root
- Busybox
- EFS Backup/Restore
- Recovery changer
- Kernel changer
- Modem changer
- Backup/Restore System App & Framework folder
- Bloatware Backup-Remove-Restore
- LockScreen Security bypass
- Clean device to prepare for Triangle Away
- Flash Recovery/Kernel/Modem from SD card (.img .bin)
Details of features under Installation & Features

Installation and Features MUST READ BEFORE USING

So You must have CWM/TWRP Recovery Installed to use this tool. Here is detail guide to get CWM on your device.

Procedure to get CWM : Click to Show Contents if you want to know How to flash CWM. If you have CWM installed then move to next step - MultiTool Intallation and features.
Step 1
Download Philz_touch_*n7100.tar.md5 Also you need to have Kies OR Samsung USB driver installed on PC.

1.Open Odin and select PDA tab (see image below) (Get Odin from here)
2.Point to recovery file you have downloaded philz_touch_* -n7100.tar.md5
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
attachment.php


5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC (see image below)
attachment.php


[Note : normally, phone should auto-reboot into recovery.
If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm]

On successful flashing your recovery change to CWM, Now Next step How to use Multitool


Installation of Multitool and Detail features

- Download DrKetan_MultiTool-AromaVxx.zip from end of this post and copy to SD card (Internal / Ext)
- Reboot device to Recovery (Vol Up +Power + Home).
- You will have recovery menu like this(see image below), Select Install zip
- Then select Int/Ext SD card depending on you have copied file location.
- Select file you have copies DrKetan_MultiTool-AromaVxx.zip and hit Entre. (See image)
attachment.php
Screenshot_2013_09_08_16.07.49.jpg
attachment.php


This will Open Aroma Installer and you will have following Option to perform. Read every option in detail before proceeding.

1.Root
attachment.php

Here you will have two option.
A.Root : You can root your device with this option, Also this option cleans leftover of previously installed Superuser/SU of different superuser app.
In case your device is previously rooted and on reboot you can't see SuperSU app in drawer OR if you unable to update binary, simply update from Play store and it should work.
B.BusyBox - Routinely this doesn't needs and most of app needs root works without this too. Still any of your app demand this then you can select this option also you can do it later too.

2.EFS Backup If you are newbies and don't know why you need this then first read this thread. I recommend all user to make EFS backup if you still don't have.
attachment.php


A.EFS Backup : This will make EFS backup in format of raw imahe efs.img to int SD card MyEFS folder
B.EFS Restore : This will restore previously made backup in case you lose IMEI and need it.

3.Recovery - This is recovery changer tool.
attachment.php


You can switch to different recovery like
A.Philz touch CWM based recovery
B.TWRP
C.Stock Recovery- remember if you flash stock recovery, you will have to use odin to flash CWM/TWRP.
Here is Philz Recovery original thread
Here is TWRP official project website

4.Kernel - You can switch between kernel
attachment.php

Available kernels are
A.NEAK kernel B.Perseus Kenel C.Stock Kernel
Here is Neak kernel original thread if you have any queries for NEAK kernel Credit @simone201 for NEAK kernel.
Here is Perseus Kernel original Thread, in case you have any kernel related queries for Perseus Kernel. Credit @AndreiLux for Perseus Kernel

5.Modem
attachment.php


A.Old Modem LK6 : Don't Flash this on New ROM ME6 and later otherwise you will lose IMEI
B.New Modem MG1 :If you downgrade ROM and lose your IMEI, flashing this new modem can restore your IMEI.

6.backup Restore general - Helpful before trying different MODs, if that doesn't work you can restore previous file wuth this.
attachment.php


A.Backup Framework folder - Will make backup of System/framework folder to IntSDcard/DrKetanMod/framework folder -Needs 100MB free space
B.Backup System Folder - will make backup of System/app folder to IntSdcard/DrKetanMod/app folder. it needs appr 700MB space.
C.Backup to ExtSD - will backup System/app + System/framework folder to ExtSDCard/DrKetanMod. Needs 800MB space.
For Restore select option according you have selected backup location.
D.Restore Framework folder from IntSD
E.Restore System/App folder from IntSD
F.Restore System app and framework folder from ExtSD

7.Bloatware
attachment.php


A.Backup Bloatware - Select this to backup bloatware before removing it so you can restore anytime you need it.
B.Remove Bloatware - You can remove batch bloatware with this. To remove selected bloatware use this tool
C.Restore Bloatware

8.LockScreen security bypass
attachment.php


A.Remove Password - If you forget your lockscreen password/Pin/Pattern, you can bypass security with this option. This will remove PIN/Password and you can reset new. In case you bypass Pattern then you may have pattern on reboot but you can unlock with any pattern and you can reset your new pattern.

9.Prepare device to use TriangleAway Newbies are not knowing about their recovery/kernel so this tool will help to reset stock.
attachment.php


A.Clean device - This will remove all left over of Super user app and SU, also remove Busybox and symlink of busybox. As well this will Replace CWM to Stock recovery. But still clean root access will remain present to use triangle away app. That can be unroot with SuperSU settings.
Again if device doesn't have SuperSU app OR fail to update binary then update it from play store.
Remember after selecting this option your recovery will be stock and if you need CWM, you have to use Odin again
B.Select This If you have stock kernel - If your kernel is custom and you want to make device clean you also have to select this option along with A. to use triangle away.

10.Own Flashing
attachment.php


No more Flashable zip OR Tar needed to flash extracted recovery/kernel.img OR modem.bin
You can extract recovery.img or boot.img or modem.bin from stock ROM by simple unzip tool and put file on Int/Ext Sd card root directory then you can follow below mentioned task from aroma to flash that stuff.

A.Flash Kernel from IntSD
B.Flash Kernel from ExtSD
C.Flash modem from IntSD
D.Flash modem from ExtSD
E.Flash recovery from IntSD
F.Flash recovery from ExtSD


Download :
DrKetan_MutiTool_AromaV11 - Basic version

Dr.Ketan_MultiTool_Advanced


Old Version
DrKetan_MutiTool_AromaV10

-------------------------------------------------------------------------------------------------------------------------------------------------------


Hope friends you will find this tool helpful to keep on your SD card so you can use it anytime. If Niewbies can't post here in dev section, use this thread instead.

GoodLuck And Happy Flashing !
 
Last edited:

dr.ketan

Recognized Developer / Recognized Contributor
ChangeLog :
[15.09.13] DrKetan's MultiTool V10 -Initial release

[17.09.13] DrKetan's MultiTool V11 - two changes. A. Own Flashing - you can flash your recovery.img /boot.img /modem.bin. B.fixed issue on twrp using ExtSD option.

[21.09.13] DrKetan's MultiTool Advance V1 added. A. Aroma File Manager with Terminal. B. Odex remover C. Simplistic backup restore. D. System push

[29.09.13] DrKetan's MultiTool Advance V2 added. A.GPS Glonass fixer B. CSC Features C. build.propTweaks D. Bloat remover customized

Credits : @Phil3759 for his amazing recovery and busybox cleaning tool @Chainfire for his Superuser.apk and SU
 

Attachments

  • Capture2.jpg
    Capture2.jpg
    49.3 KB · Views: 136,231
  • Capture1.jpg
    Capture1.jpg
    45.7 KB · Views: 138,078
  • Screenshot_2013_09_15_08.36.46.jpg
    Screenshot_2013_09_15_08.36.46.jpg
    18.5 KB · Views: 153,805
  • Screenshot_2013_09_15_08.40.32.jpg
    Screenshot_2013_09_15_08.40.32.jpg
    31.1 KB · Views: 150,564
  • Bloatware.jpg
    Bloatware.jpg
    33.2 KB · Views: 148,358
  • EFS.jpg
    EFS.jpg
    31 KB · Views: 151,115
  • Gen_backup.jpg
    Gen_backup.jpg
    34 KB · Views: 148,250
  • Kernel.jpg
    Kernel.jpg
    32.9 KB · Views: 148,464
  • LS_Bypass.jpg
    LS_Bypass.jpg
    32.8 KB · Views: 146,769
  • Modem.jpg
    Modem.jpg
    32.6 KB · Views: 148,078
  • Recovery.jpg
    Recovery.jpg
    30.8 KB · Views: 148,324
  • Root.jpg
    Root.jpg
    31.2 KB · Views: 149,060
  • TA.jpg
    TA.jpg
    32.6 KB · Views: 146,078
  • OwnFlashing.jpg
    OwnFlashing.jpg
    35.8 KB · Views: 133,213
  • Screenshot_2013_09_29_09.29.54.jpg
    Screenshot_2013_09_29_09.29.54.jpg
    25.8 KB · Views: 152,841
  • Screenshot_2013_09_28_17.08.36.jpg
    Screenshot_2013_09_28_17.08.36.jpg
    18.3 KB · Views: 152,647
Last edited:

dr.ketan

Recognized Developer / Recognized Contributor
I MutiTool Advanced

Ok friends glad to present advanced version of MultiTool. This is not much different from basic version but having some extra features and may not be comfortable to use by newbies. so releasing here as extra version and keeping basic vesion as it is.

Index

attachment.php


- Root
- Busybox
- Recovery changer
- Kernel changer
- Modem changer
- Backup/Restore System App & Framework folder/ EFS /Simplistic and mass bloatware remover
- Restore
- Odex remover
- Customized bloatware remover
- Customized CSC Features
- Tweaks - build.prop
- LockScreen Security bypass
- Push System Apks
- GPS Glonass Fixer
- Clean device to prepare for Triangle Away

This is advanced version and expecting no need to write guide about how to flash CWM and install multitool, still anyone have doubt please refer post #1.

Detail features

- Tool having some welcome screen, introduction, terms and condition, changelog, features list initially.

- After this is MainMenu. You can select either of one menu
attachment.php

A. MultiTool Utilities
B. Aroma File Manager with Terminal Console
C. System Information.
attachment.php
attachment.php

- Starting with Mutitool utilities, you will get following options
1. Root option : Inject root to device.
2. Busybox : Inject Busybox to device.
3. Recovery Flasher
  • Phillz recovery
  • TWRP recovery
  • Stock recovery
  • Recovery from SD card - You need to put desired recovery.img file on root directory of int SD card
  • Recovery from ExtSD card - You need to put desired recovery.img file on root directory of Ext SD card
  • Do Not change - To Keep your existing recovery
attachment.php
attachment.php
attachment.php

4. Modem Flasher
  • New MG1 flash - you can restore IMEI lost by downgrading ROM. I have removed option to flash old modem as it is not useful. still can flash any modem from SD card
  • Flash Modem from Ext SD - Put modem.bin file on root directory of ExtSD to flash
  • Flash Modem from Int SD - Put modem.bin file on root directory of IntSD to flash
  • Do Not change - To keep your existing modem
attachment.php

5. Kernel Flasher
  • Perseus Kernel
  • NEAK Kernel
  • RedPill Kernel (TW)
  • Adam Kernel
  • Stock Kernel (MG1)
  • Flash Kernel from ExtSD - Put boot.img file on root directory of ExtSD to flash
  • Flash Kernel from IntSD - Put boot.img file on root directory of IntSD to flash
  • Do not change - To keep existing kernel
attachment.php

6.Backup and Removel utility - This will be Menu page
There will be option to skip this OR to enter to customize backup/removal
  • EFS - A.Backup to IntSD B.Backup to ExtSD
  • Bloatware - A.Backup Bloatware (To bloatware folder in intSD)B.Bloatware Removal
  • System Backup A.Backup System/app folder to IntSD/DrKetanMod/app B.Backup System/framework folder to IntSD/Dr.KetanMod/framework
  • Simplistic Backup A.OdexB.Deodex If you want to try Simplictic framework. select according you are flashing version of simplistic. Incase simplistic doesn't work, you can restore your files.
attachment.php
attachment.php

7.Restore Utility - This will be menu page
There will be option to skip OR enter customiztion of restore.
All above option of backup will available here when you needs to restore.
  • EFS - A.Restore from IntSD B.Restore from ExtSD
  • Bloatware - Restore bloatware, if you have previously made backup
  • System Folder - A.Restore from DrKetanMod/app to System/app B. Restore from Dr.KetanMod/framework to System/framework
  • Simplistic - A.Odex B.Deodexed
attachment.php
attachment.php

8.Odex remover - This is Menu page
select skip OR enter to remove selected odex. This helpful when you flashing mod on odex rom doesn't have odex removal script
  • There is 19 common odex you can select any of it to remove
attachment.php
attachment.php

9.Customized bloatware remover
Now there is option to remove selected Bloatwares.
10.Customized CSC Features
You can have following CSC features. Thanks to @wesamothman and @MBariya for providing feature list. Just to add
-Backup is highly Recommended -Don't Use TRIGGER option first time -If you know your fetures file name is feature.cml and not others.xml then only select workaround option. - if first time regular flashing doesn't work, select only workaround option and flash. - still fail, select Trigger option + all requred feature and flash. - still fails select only workaround and flash - Still fails, Sorry hard luck, restore your backup.

attachment.php
attachment.php
attachment.php


11.Build Prop Tweaks
Following tweaks you can apply. Credits goes to original founder of tweaks, searched XDA for build.prop tweaked and selected some of it.
attachment.php


12.Lock Screen security bypass
  • You can use this if you forget PIN/Password/Pattern to remove it.
attachment.php

13.SystemPush - Push application to System folder
  • place apk and / or odex to sdcard/app folder to push system/app folder
  • place jar,apk and / or odex to sdcard/framework folder to push
    system/framework folder
attachment.php


14.GPS/Glonass Fixer
Read This for more info, no need to download separately as it's included in tool.
15.Clean Device -
  • Use this to replace recovery with stock one, also remove old leftover of multiple superuser,su and busybox. still you will have root access to use triangle away
  • If your kernel is custom you have to use second option, as that will do above all plus replace custom kernel with stock one.
attachment.php


Will update screenshot later

Download
Dr.Ketan MultiTool Advance V2 [For 4.1.*]
Dr.Ketan MultiTool Advance V6 [For 4.3]


Older Vx
Dr.Ketan MultiTool Advance V1
Mirror
MultiTool V5 (For 4.3 OS) ---------- Mirror for V5 advance
 
Last edited:

dr.ketan

Recognized Developer / Recognized Contributor
Last one In case
 

Attachments

  • BusyBox.jpg
    BusyBox.jpg
    17.9 KB · Views: 158,849
  • cleaning.jpg
    cleaning.jpg
    20.3 KB · Views: 155,179
  • Console.jpg
    Console.jpg
    17.8 KB · Views: 159,887
  • FileManager.jpg
    FileManager.jpg
    24.6 KB · Views: 159,528
  • Kernel.jpg
    Kernel.jpg
    26.8 KB · Views: 157,756
  • LockScreen.jpg
    LockScreen.jpg
    18.3 KB · Views: 154,822
  • MainMenu.jpg
    MainMenu.jpg
    19.8 KB · Views: 159,721
  • Modem.jpg
    Modem.jpg
    21.7 KB · Views: 158,357
  • Root.jpg
    Root.jpg
    17.3 KB · Views: 159,188
  • odex.jpg
    odex.jpg
    15.6 KB · Views: 156,607
  • Recovery.jpg
    Recovery.jpg
    25.3 KB · Views: 158,239
  • Restore.jpg
    Restore.jpg
    15.3 KB · Views: 156,932
  • systemPush.jpg
    systemPush.jpg
    20.5 KB · Views: 155,054
Last edited:

chandoliasnikos

Senior Member
Dec 6, 2010
311
47
Katerini
Thanks a lot Doc for the tool and your entire contribution to the Note II comminity!! We sure will miss u! Just a request here: is it possible to work with another recovery, besides cwm? I'm using TWRP, hence the question. Thanks again!!


From the middle of nowhere to the center of everywhere!!
 

MBariya

Senior Member
Mar 1, 2012
909
422
Jamnagar
All in one toolbox by Dr.Ketan, waiting for few day for testing this tool.
Great Job Dr.Ketan. No need any extra zip files. only one file will do all things.
Will Miss your mods.
Can you please provide link for guide of Aroma installer. I have searched in xda forum but can't get proper result.
 

dr.ketan

Recognized Developer / Recognized Contributor
I think one more utility we can add to this tool.
Flash own choice recovery kernel and modem. As many user still unable to manage flashable zip or tar from .img
So here you can put img file on sdcard and aroma can flash it.
Also looking forward to flash stock rom with aroma so no more prerooted rom you needs.


Sent from my GT-N7100 using xda premium
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 108
    MutiTool - Swiss army knife - MUST have for Newbies. 17Menu >300 choices. believe it!

    MutiTool Advaced - Swiss army knife - All in One Tool is on post#3

    MutiTool Basic- Swiss army knife - MUST have tool for Newbies.

    This is for N7100 only, N7105 user look here.

    Glad to announce a utility tool - MultiTool.
    This is state of the art must have tool for all newcomers. You can manage following things with it.

    - Root
    - Busybox
    - EFS Backup/Restore
    - Recovery changer
    - Kernel changer
    - Modem changer
    - Backup/Restore System App & Framework folder
    - Bloatware Backup-Remove-Restore
    - LockScreen Security bypass
    - Clean device to prepare for Triangle Away
    - Flash Recovery/Kernel/Modem from SD card (.img .bin)
    Details of features under Installation & Features

    Installation and Features MUST READ BEFORE USING

    So You must have CWM/TWRP Recovery Installed to use this tool. Here is detail guide to get CWM on your device.

    Procedure to get CWM : Click to Show Contents if you want to know How to flash CWM. If you have CWM installed then move to next step - MultiTool Intallation and features.
    Step 1
    Download Philz_touch_*n7100.tar.md5 Also you need to have Kies OR Samsung USB driver installed on PC.

    1.Open Odin and select PDA tab (see image below) (Get Odin from here)
    2.Point to recovery file you have downloaded philz_touch_* -n7100.tar.md5
    3.Now switch off device and reboot in download mode
    press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
    4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
    attachment.php


    5.Hit ‘Start’ to flash
    6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC (see image below)
    attachment.php


    [Note : normally, phone should auto-reboot into recovery.
    If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
    when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm]

    On successful flashing your recovery change to CWM, Now Next step How to use Multitool


    Installation of Multitool and Detail features

    - Download DrKetan_MultiTool-AromaVxx.zip from end of this post and copy to SD card (Internal / Ext)
    - Reboot device to Recovery (Vol Up +Power + Home).
    - You will have recovery menu like this(see image below), Select Install zip
    - Then select Int/Ext SD card depending on you have copied file location.
    - Select file you have copies DrKetan_MultiTool-AromaVxx.zip and hit Entre. (See image)
    attachment.php
    Screenshot_2013_09_08_16.07.49.jpg
    attachment.php


    This will Open Aroma Installer and you will have following Option to perform. Read every option in detail before proceeding.

    1.Root
    attachment.php

    Here you will have two option.
    A.Root : You can root your device with this option, Also this option cleans leftover of previously installed Superuser/SU of different superuser app.
    In case your device is previously rooted and on reboot you can't see SuperSU app in drawer OR if you unable to update binary, simply update from Play store and it should work.
    B.BusyBox - Routinely this doesn't needs and most of app needs root works without this too. Still any of your app demand this then you can select this option also you can do it later too.

    2.EFS Backup If you are newbies and don't know why you need this then first read this thread. I recommend all user to make EFS backup if you still don't have.
    attachment.php


    A.EFS Backup : This will make EFS backup in format of raw imahe efs.img to int SD card MyEFS folder
    B.EFS Restore : This will restore previously made backup in case you lose IMEI and need it.

    3.Recovery - This is recovery changer tool.
    attachment.php


    You can switch to different recovery like
    A.Philz touch CWM based recovery
    B.TWRP
    C.Stock Recovery- remember if you flash stock recovery, you will have to use odin to flash CWM/TWRP.
    Here is Philz Recovery original thread
    Here is TWRP official project website

    4.Kernel - You can switch between kernel
    attachment.php

    Available kernels are
    A.NEAK kernel B.Perseus Kenel C.Stock Kernel
    Here is Neak kernel original thread if you have any queries for NEAK kernel Credit @simone201 for NEAK kernel.
    Here is Perseus Kernel original Thread, in case you have any kernel related queries for Perseus Kernel. Credit @AndreiLux for Perseus Kernel

    5.Modem
    attachment.php


    A.Old Modem LK6 : Don't Flash this on New ROM ME6 and later otherwise you will lose IMEI
    B.New Modem MG1 :If you downgrade ROM and lose your IMEI, flashing this new modem can restore your IMEI.

    6.backup Restore general - Helpful before trying different MODs, if that doesn't work you can restore previous file wuth this.
    attachment.php


    A.Backup Framework folder - Will make backup of System/framework folder to IntSDcard/DrKetanMod/framework folder -Needs 100MB free space
    B.Backup System Folder - will make backup of System/app folder to IntSdcard/DrKetanMod/app folder. it needs appr 700MB space.
    C.Backup to ExtSD - will backup System/app + System/framework folder to ExtSDCard/DrKetanMod. Needs 800MB space.
    For Restore select option according you have selected backup location.
    D.Restore Framework folder from IntSD
    E.Restore System/App folder from IntSD
    F.Restore System app and framework folder from ExtSD

    7.Bloatware
    attachment.php


    A.Backup Bloatware - Select this to backup bloatware before removing it so you can restore anytime you need it.
    B.Remove Bloatware - You can remove batch bloatware with this. To remove selected bloatware use this tool
    C.Restore Bloatware

    8.LockScreen security bypass
    attachment.php


    A.Remove Password - If you forget your lockscreen password/Pin/Pattern, you can bypass security with this option. This will remove PIN/Password and you can reset new. In case you bypass Pattern then you may have pattern on reboot but you can unlock with any pattern and you can reset your new pattern.

    9.Prepare device to use TriangleAway Newbies are not knowing about their recovery/kernel so this tool will help to reset stock.
    attachment.php


    A.Clean device - This will remove all left over of Super user app and SU, also remove Busybox and symlink of busybox. As well this will Replace CWM to Stock recovery. But still clean root access will remain present to use triangle away app. That can be unroot with SuperSU settings.
    Again if device doesn't have SuperSU app OR fail to update binary then update it from play store.
    Remember after selecting this option your recovery will be stock and if you need CWM, you have to use Odin again
    B.Select This If you have stock kernel - If your kernel is custom and you want to make device clean you also have to select this option along with A. to use triangle away.

    10.Own Flashing
    attachment.php


    No more Flashable zip OR Tar needed to flash extracted recovery/kernel.img OR modem.bin
    You can extract recovery.img or boot.img or modem.bin from stock ROM by simple unzip tool and put file on Int/Ext Sd card root directory then you can follow below mentioned task from aroma to flash that stuff.

    A.Flash Kernel from IntSD
    B.Flash Kernel from ExtSD
    C.Flash modem from IntSD
    D.Flash modem from ExtSD
    E.Flash recovery from IntSD
    F.Flash recovery from ExtSD


    Download :
    DrKetan_MutiTool_AromaV11 - Basic version

    Dr.Ketan_MultiTool_Advanced


    Old Version
    DrKetan_MutiTool_AromaV10

    -------------------------------------------------------------------------------------------------------------------------------------------------------


    Hope friends you will find this tool helpful to keep on your SD card so you can use it anytime. If Niewbies can't post here in dev section, use this thread instead.

    GoodLuck And Happy Flashing !
    67
    I MutiTool Advanced

    Ok friends glad to present advanced version of MultiTool. This is not much different from basic version but having some extra features and may not be comfortable to use by newbies. so releasing here as extra version and keeping basic vesion as it is.

    Index

    attachment.php


    - Root
    - Busybox
    - Recovery changer
    - Kernel changer
    - Modem changer
    - Backup/Restore System App & Framework folder/ EFS /Simplistic and mass bloatware remover
    - Restore
    - Odex remover
    - Customized bloatware remover
    - Customized CSC Features
    - Tweaks - build.prop
    - LockScreen Security bypass
    - Push System Apks
    - GPS Glonass Fixer
    - Clean device to prepare for Triangle Away

    This is advanced version and expecting no need to write guide about how to flash CWM and install multitool, still anyone have doubt please refer post #1.

    Detail features

    - Tool having some welcome screen, introduction, terms and condition, changelog, features list initially.

    - After this is MainMenu. You can select either of one menu
    attachment.php

    A. MultiTool Utilities
    B. Aroma File Manager with Terminal Console
    C. System Information.
    attachment.php
    attachment.php

    - Starting with Mutitool utilities, you will get following options
    1. Root option : Inject root to device.
    2. Busybox : Inject Busybox to device.
    3. Recovery Flasher
    • Phillz recovery
    • TWRP recovery
    • Stock recovery
    • Recovery from SD card - You need to put desired recovery.img file on root directory of int SD card
    • Recovery from ExtSD card - You need to put desired recovery.img file on root directory of Ext SD card
    • Do Not change - To Keep your existing recovery
    attachment.php
    attachment.php
    attachment.php

    4. Modem Flasher
    • New MG1 flash - you can restore IMEI lost by downgrading ROM. I have removed option to flash old modem as it is not useful. still can flash any modem from SD card
    • Flash Modem from Ext SD - Put modem.bin file on root directory of ExtSD to flash
    • Flash Modem from Int SD - Put modem.bin file on root directory of IntSD to flash
    • Do Not change - To keep your existing modem
    attachment.php

    5. Kernel Flasher
    • Perseus Kernel
    • NEAK Kernel
    • RedPill Kernel (TW)
    • Adam Kernel
    • Stock Kernel (MG1)
    • Flash Kernel from ExtSD - Put boot.img file on root directory of ExtSD to flash
    • Flash Kernel from IntSD - Put boot.img file on root directory of IntSD to flash
    • Do not change - To keep existing kernel
    attachment.php

    6.Backup and Removel utility - This will be Menu page
    There will be option to skip this OR to enter to customize backup/removal
    • EFS - A.Backup to IntSD B.Backup to ExtSD
    • Bloatware - A.Backup Bloatware (To bloatware folder in intSD)B.Bloatware Removal
    • System Backup A.Backup System/app folder to IntSD/DrKetanMod/app B.Backup System/framework folder to IntSD/Dr.KetanMod/framework
    • Simplistic Backup A.OdexB.Deodex If you want to try Simplictic framework. select according you are flashing version of simplistic. Incase simplistic doesn't work, you can restore your files.
    attachment.php
    attachment.php

    7.Restore Utility - This will be menu page
    There will be option to skip OR enter customiztion of restore.
    All above option of backup will available here when you needs to restore.
    • EFS - A.Restore from IntSD B.Restore from ExtSD
    • Bloatware - Restore bloatware, if you have previously made backup
    • System Folder - A.Restore from DrKetanMod/app to System/app B. Restore from Dr.KetanMod/framework to System/framework
    • Simplistic - A.Odex B.Deodexed
    attachment.php
    attachment.php

    8.Odex remover - This is Menu page
    select skip OR enter to remove selected odex. This helpful when you flashing mod on odex rom doesn't have odex removal script
    • There is 19 common odex you can select any of it to remove
    attachment.php
    attachment.php

    9.Customized bloatware remover
    Now there is option to remove selected Bloatwares.
    10.Customized CSC Features
    You can have following CSC features. Thanks to @wesamothman and @MBariya for providing feature list. Just to add
    -Backup is highly Recommended -Don't Use TRIGGER option first time -If you know your fetures file name is feature.cml and not others.xml then only select workaround option. - if first time regular flashing doesn't work, select only workaround option and flash. - still fail, select Trigger option + all requred feature and flash. - still fails select only workaround and flash - Still fails, Sorry hard luck, restore your backup.

    attachment.php
    attachment.php
    attachment.php


    11.Build Prop Tweaks
    Following tweaks you can apply. Credits goes to original founder of tweaks, searched XDA for build.prop tweaked and selected some of it.
    attachment.php


    12.Lock Screen security bypass
    • You can use this if you forget PIN/Password/Pattern to remove it.
    attachment.php

    13.SystemPush - Push application to System folder
    • place apk and / or odex to sdcard/app folder to push system/app folder
    • place jar,apk and / or odex to sdcard/framework folder to push
      system/framework folder
    attachment.php


    14.GPS/Glonass Fixer
    Read This for more info, no need to download separately as it's included in tool.
    15.Clean Device -
    • Use this to replace recovery with stock one, also remove old leftover of multiple superuser,su and busybox. still you will have root access to use triangle away
    • If your kernel is custom you have to use second option, as that will do above all plus replace custom kernel with stock one.
    attachment.php


    Will update screenshot later

    Download
    Dr.Ketan MultiTool Advance V2 [For 4.1.*]
    Dr.Ketan MultiTool Advance V6 [For 4.3]


    Older Vx
    Dr.Ketan MultiTool Advance V1
    Mirror
    MultiTool V5 (For 4.3 OS) ---------- Mirror for V5 advance
    25
    ChangeLog :
    [15.09.13] DrKetan's MultiTool V10 -Initial release

    [17.09.13] DrKetan's MultiTool V11 - two changes. A. Own Flashing - you can flash your recovery.img /boot.img /modem.bin. B.fixed issue on twrp using ExtSD option.

    [21.09.13] DrKetan's MultiTool Advance V1 added. A. Aroma File Manager with Terminal. B. Odex remover C. Simplistic backup restore. D. System push

    [29.09.13] DrKetan's MultiTool Advance V2 added. A.GPS Glonass fixer B. CSC Features C. build.propTweaks D. Bloat remover customized

    Credits : @Phil3759 for his amazing recovery and busybox cleaning tool @Chainfire for his Superuser.apk and SU
    11
    Last one In case
    7
    Guys just planned some changes. But what I am trying to implement is somewhat complicated and won't be noob friendly.
    1.include aroma file manager. This is very useful particularly you don't have ext sd card. You can manage system and int SD files from recovery.
    2. flash system application form sdcard
    Also one - two more plans but still testing possibilities for that.
    I have to rewrite complete tool so planning to make other version as advanced version and keep existing for newbies.

    Sent from my GT-N7100 using xda premium