[LIST] Android Games with Gamepad support
- Thread starter zulu99
- Start date
For those looking for a good first person shooter with gamepad support, I strongly urge you to try CS-Portable. Best Android game I've come across.
Sent from my Transformer TF101 using Tapatalk 2
Sent from my Transformer TF101 using Tapatalk 2
MC3 is pretty good too. Of course you'll have to create a touch profile but it has good MP, and good graphics IMO.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Beach Buggy Blitz
---------- Post added at 08:52 AM ---------- Previous post was at 08:28 AM ----------
Asphalt 7: Heat
---------- Post added at 08:52 AM ---------- Previous post was at 08:28 AM ----------
Asphalt 7: Heat
SyCoREAPER
Retired Forum Moderator
The Bard's Tale by inXile Entertainment
Normal on screen controls
Controller support done right!!!
No mapping
Removes on scree controls
Controller works with menus
The only con is the icon
Last edited:
Got Shine runner going with it..
https://play.google.com/store/apps/...1bGwsMSwxLDEsImNvbS52ZWN0b3J1bml0LmdyZWVuIl0.
plus both Trial extreme...working
https://play.google.com/store/apps/...ossoft.trialx2_gl2_demo&feature=search_result
https://play.google.com/store/apps/details?id=com.galapagossoft.trialdemo&feature=search_result
Last edited:
my ps2 controller using otg is not woeking whit anything like miencraft or even homescreen? i see the lights go on? i use ps2 to usb and usb to mciro usb cable
i see the lights go on? i use ps2 to usb and usb to mciro usb cableRight analogue stick X ad Y Axis are detected Swaped
Hello,
I have a USB PS2 clone controller that works very well with USB/BT Joystick center and i can play all the GTA games just fine.
My problem is that in my gamepad the right analogue stick the X ad Y Axis are detected Swaped. When i move the stick forward it registers as left and when i move right it registers as down. This problem can we overcomed in USB/BT Joystick center because i can map the buttons as i see fit.
In games that have native gamepad support such as : Shadowgun, Shadowgun; DeadZone, Dead Trigger - MadFinger Games, i can move my character ok but when i try to look aroung using the right analogue stick UP is left and Right is down, so this is rather confusing.
Is there a way to modify keymappings in the native support driver ?
Thanks
Hello,
I have a USB PS2 clone controller that works very well with USB/BT Joystick center and i can play all the GTA games just fine.
My problem is that in my gamepad the right analogue stick the X ad Y Axis are detected Swaped. When i move the stick forward it registers as left and when i move right it registers as down. This problem can we overcomed in USB/BT Joystick center because i can map the buttons as i see fit.
In games that have native gamepad support such as : Shadowgun, Shadowgun; DeadZone, Dead Trigger - MadFinger Games, i can move my character ok but when i try to look aroung using the right analogue stick UP is left and Right is down, so this is rather confusing.
Is there a way to modify keymappings in the native support driver ?
Thanks
My Gamepad:
I: Bus=0003 Vendor=07b5 Product=0312 Version=0110
N: Name="Mega World USB Game Controllers"
P: Phys=usb-ff540000.usb-1.2/input0
S: Sysfs=/devices/ff540000.usb/usb3/3-1/3-1.2/3-1.2:1.0/input/input100
U: Uniq=
H: Handlers=event3 ddr_freq
B: PROP=0
B: EV=1b
B: KEY=fff 0 0 0 0 0 0 0 0 0
B: ABS=30027
B: MSC=10
and my Keylayout file:
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Mega World USB Game Controllers
#
key 0x188 BUTTON_A
key 0x189 BUTTON_B
key 0x190 BUTTON_X
key 0x191 BUTTON_Y
key 0x192 BUTTON_L1
key 0x194 BUTTON_R1
key 0x193 BUTTON_L2
key 0x195 BUTTON_R2
key 0x196 BUTTON_SELECT
key 0x197 BUTTON_START
key 0x198 BUTTON_THUMBL
key 0x199 BUTTON_THUMBR
axis 0x00 X
axis 0x01 Y
axis 0x02 RZ
axis 0x05 Z
axis 0x10 HAT_X
axis 0x11 HAT_Y
But my changes are not applied
I: Bus=0003 Vendor=07b5 Product=0312 Version=0110
N: Name="Mega World USB Game Controllers"
P: Phys=usb-ff540000.usb-1.2/input0
S: Sysfs=/devices/ff540000.usb/usb3/3-1/3-1.2/3-1.2:1.0/input/input100
U: Uniq=
H: Handlers=event3 ddr_freq
B: PROP=0
B: EV=1b
B: KEY=fff 0 0 0 0 0 0 0 0 0
B: ABS=30027
B: MSC=10
and my Keylayout file:
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Mega World USB Game Controllers
#
key 0x188 BUTTON_A
key 0x189 BUTTON_B
key 0x190 BUTTON_X
key 0x191 BUTTON_Y
key 0x192 BUTTON_L1
key 0x194 BUTTON_R1
key 0x193 BUTTON_L2
key 0x195 BUTTON_R2
key 0x196 BUTTON_SELECT
key 0x197 BUTTON_START
key 0x198 BUTTON_THUMBL
key 0x199 BUTTON_THUMBR
axis 0x00 X
axis 0x01 Y
axis 0x02 RZ
axis 0x05 Z
axis 0x10 HAT_X
axis 0x11 HAT_Y
But my changes are not applied
I updated my config to :
key 0x188 BUTTON_A
key 0x189 BUTTON_B
key 0x190 BUTTON_X
key 0x191 BUTTON_Y
key 0x192 BUTTON_L1
key 0x194 BUTTON_R1
key 0x193 BUTTON_L2
key 0x195 BUTTON_R2
key 0x196 BUTTON_SELECT
key 0x197 BUTTON_START
key 0x198 BUTTON_THUMBL
key 0x199 BUTTON_THUMBR
axis 0x00 X
axis 0x01 Y
axis 0x03 RZ
axis 0x04 Z
#axis 0x10 HAT_X
#axis 0x11 HAT_Y
and applied correct file attributes and the config seems to work since ONLY the right analogue stick is working obviously there is a fault in my syntax.
Can anyone help ?
key 0x188 BUTTON_A
key 0x189 BUTTON_B
key 0x190 BUTTON_X
key 0x191 BUTTON_Y
key 0x192 BUTTON_L1
key 0x194 BUTTON_R1
key 0x193 BUTTON_L2
key 0x195 BUTTON_R2
key 0x196 BUTTON_SELECT
key 0x197 BUTTON_START
key 0x198 BUTTON_THUMBL
key 0x199 BUTTON_THUMBR
axis 0x00 X
axis 0x01 Y
axis 0x03 RZ
axis 0x04 Z
#axis 0x10 HAT_X
#axis 0x11 HAT_Y
and applied correct file attributes and the config seems to work since ONLY the right analogue stick is working obviously there is a fault in my syntax.
Can anyone help ?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
51Meant more for touch profiles etc
Sent from my Transformer TF101 using XDA Premium HD app
I do not like touch profiles, I find it uncomfortable to create a touch profile for each game, or different touch profile for different screen size or change touch profile for every game. if the game support the gamepad, from the comfort of my couch, with a single device i play with all games.
In essence we are only interested in games that support external input devices.1Beach Buggy Blitz
---------- Post added at 08:52 AM ---------- Previous post was at 08:28 AM ----------
Asphalt 7: Heat
