Android 2.2 (FroYo) On HTC [03 Sep 2010] (V1.6)

Status
Not open for further replies.
Search This thread

zero0007

Member
Nov 23, 2008
34
0
calibration points

I noticed that during boot there is briefly the message "can't open '/calibration points' ..could this be a reason why I have to use stylus (as mentioned in other thread) instead?

Frustrated with the touchscreen..any tips much appreciated.
Cheers
 

jeanfrederic

Senior Member
Dec 29, 2007
506
11
Bruxelles
www.whazup.be
This build is even harder than 2.1 or... to install.
Though i NEVER managed to instal from the first try (i always have to try 5/6 times with cable or without, with startup.txt or without startup ...), this build just doesn't want to install.
If i'm right, it is exactly the same as for the former builds. So dwnld the Zip, unzip to FAT32 µSD root, run auto-setup, choose Blackstone and OK, run haret, and wait.
Either i have a Waiting for SD card or have several error messages like "can't access tty" "error 110" 'the superblock could not be read..."
Wtf?
 

TheBrilliantMistake

Senior Member
May 3, 2007
991
400
This build is even harder than 2.1 or... to install.
Though i NEVER managed to instal from the first try (i always have to try 5/6 times with cable or without, with startup.txt or without startup ...), this build just doesn't want to install.
If i'm right, it is exactly the same as for the former builds. So dwnld the Zip, unzip to FAT32 µSD root, run auto-setup, choose Blackstone and OK, run haret, and wait.
Either i have a Waiting for SD card or have several error messages like "can't access tty" "error 110" 'the superblock could not be read..."
Wtf?
It's definitely your system and not me!
You've got the install procedure perfectly right. There's nothing to it... it's so simple.
Are you using Blackstone?
Have you formatted your SD Card recently and removed any partitions?

I really don't know how much simpler I can make the install... it's just dropping a bunch of files to the SD Card. The only things that can go wrong are:

a) Not enough room on SD Card
b) User can't follow instructions and tries to be a smart ass keeping old android releases on their SD Card (very common)
c) User tries keeping their data.img file (very common)
d) User forgets to run autosetup (very common)
e) User chooses overclocking, and wonders why things break
f) User has problematic SD Card (fairly common)
g) User has their own startup.txt which doesn't work

If you can't even boot into FroYo, it's definitely your system IMO.
 

jeanfrederic

Senior Member
Dec 29, 2007
506
11
Bruxelles
www.whazup.be
It's definitely your system and not me!
You've got the install procedure perfectly right. There's nothing to it... it's so simple.
Are you using Blackstone?
Have you formatted your SD Card recently and removed any partitions?

I really don't know how much simpler I can make the install... it's just dropping a bunch of files to the SD Card. The only things that can go wrong are:

a) Not enough room on SD Card
b) User can't follow instructions and tries to be a smart ass keeping old android releases on their SD Card (very common)
c) User tries keeping their data.img file (very common)
d) User forgets to run autosetup (very common)
e) User chooses overclocking, and wonders why things break
f) User has problematic SD Card (fairly common)
g) User has their own startup.txt which doesn't work

If you can't even boot into FroYo, it's definitely your system IMO.

Hi TBM.
I don't know what happens. You know I always install on a fresh formatted FAT32 1Go µSD. I always follow the instructions... but it works sometimes, sometimes not. This build is higly problematic for my Blackstone, I don't understand.
I have to say that a log or trace.txt 'd help a lot but...
Thx for your reply anyway.
 

TheBrilliantMistake

Senior Member
May 3, 2007
991
400
Hi TBM.
I don't know what happens. You know I always install on a fresh formatted FAT32 1Go µSD. I always follow the instructions... but it works sometimes, sometimes not. This build is higly problematic for my Blackstone, I don't understand.
I have to say that a log or trace.txt 'd help a lot but...
Thx for your reply anyway.

From what I can gather...
the superblock error is down to a corrupted data.img file or a corrupted SD Card in general.
Delete your data.img and run haret again.. data.img should be automatically recreated.
Otherwise, try with a different SD card. Maybe there's something weird with the formatting.... I don't know.
 

calc1

Member
Sep 5, 2009
5
1
Hello,i have installed this on my HTC Blackstone.All will work great(exept Camera).I found small issues(for me?).The Phone won´t go to sleep.When i look to Telefoninfo/ Akku,there is only Android System.In your (BrillantMistake)Enclair 2.1 comes others like Standby too.And when i set the red Telephone Button (in Spare Parts End Button Behavior) go to sleep,nothings happens(exept screen off).Is there any App to make it really sleep?


Another issue is when i listen to the speaker(screen off or on,all Volume Settings down) there will be always a very low noise like swooshing.This will cost power too.

Thanks

Sorry for bad English
 

florent_lyon

Member
Jan 1, 2009
9
1
Hello,
for me it works great, I am still chasing for new versions and improvements... thank you all for the work already been done !

- Wifi working
- almost no touchscreen problem (might be that I don't tap strong enough sometimes)
- bluetooth connected in my car, but the music is cut (like is the connection flow is weak)
- positionning via wifi and GSM antenna working
- GPS working (added GPS software to check nr of satellites)

I have an issue with "Wikitude" software: it doesn't manage to start, it says the positionning doesn't initiate properly. (this software shows nearby services)
=> I think it should work, even without camera, did anybody try and have a hint about this bug ?
 

llolloll

New member
Jul 23, 2009
3
0
I just care about sth.

1.How about the battery problem? The last version I use only for half day.
2.Does the txt for chinese shows right?
3.How about the GPS working?Can i use it for googlemap?Or for my location?
4.How about the speed?Is it faster than the last version?
 

TheBrilliantMistake

Senior Member
May 3, 2007
991
400
mate, i already download the file. but, how to install it? sorry for my asking. i dont know hos to use it...thanks

that is OLD, don't install it.
The opening post always has the latest 'good' components. Sometimes there may be a slightly newer component, but newer is NOT always better. Wait a day or so, and if it's worth having I'll release it.
 

adamsmiley

Senior Member
Jul 23, 2010
113
2
I see that we are now on V1.1 as of today. Can someone explain to me what was updated? I just installed V1.0 last week and want to know if I will get anything form upgrading? Is there a way to upgrade with out having to reinstall everything?

I see this on the first page: (but don't understand what I get from it)

What's New?
Latest Update: 26 July 2010 (V1.0)
InitRD - 20100720-5816d27
Rootfs - 20100721-156bc51
System - XDANDROID.2.2.AOSP.25.07.10
Kernel - htc-msm-linux @ 20100720_171629
System now includes Chrome To Phone
Brought back the media folder for phone ringtones etc
No Boot Animation - So have patience (couple of minutes) during first install when the screen goes blank
I'd advise that once installed, you also launch SpareParts, and configure the window animations etc to 'fast'
There is a chance that after installation, some Startup.txt settings MAY be incorrect for your device. If you discover any mistake, PLEASE let me know, I will correct asap. I need your help on this guys.
 

TheBrilliantMistake

Senior Member
May 3, 2007
991
400
I see that we are now on V1.1 as of today. Can someone explain to me what was updated? I just installed V1.0 last week and want to know if I will get anything form upgrading? Is there a way to upgrade with out having to reinstall everything?

I see this on the first page: (but don't understand what I get from it)

What's New?
Latest Update: 26 July 2010 (V1.0)
InitRD - 20100720-5816d27
Rootfs - 20100721-156bc51
System - XDANDROID.2.2.AOSP.25.07.10
Kernel - htc-msm-linux @ 20100720_171629
System now includes Chrome To Phone
Brought back the media folder for phone ringtones etc
No Boot Animation - So have patience (couple of minutes) during first install when the screen goes blank
I'd advise that once installed, you also launch SpareParts, and configure the window animations etc to 'fast'
There is a chance that after installation, some Startup.txt settings MAY be incorrect for your device. If you discover any mistake, PLEASE let me know, I will correct asap. I need your help on this guys.

In this instance, just install over the top. Then delete system.sqsh file and all SHOULD be ok.
You may have a problem with the widgets not loading properly, if so, just delete them from your screen and re-add them :)
This release fixes the 'no ringtones' issue by adding some ringtones, and includes a Chrome To Phone app (Google Chrome sync thing)
 

adamsmiley

Senior Member
Jul 23, 2010
113
2
When you say install over the top do you mean I need to down load the zip file and just copy the files and replace or should I use the cab file? Thanks for your help.
 
Last edited:

leoayu

Member
May 3, 2009
5
0
VERY NICE!!!
but new verion also have a problem,
cant use photo view....???
why???on 2.1 this funtion is work.....
 

dogans

Senior Member
Nov 17, 2008
464
18
I'm trying to install the .cab, but as soon as I start the installation, I get a message that says that the install was "unsuccessful".

Any ideas anyone?
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    xdandroid.jpg



    Android on your Windows Mobile HTC Device...
    Supports Blackstone, Diamond, Diamond 500, Fuze, Raphael, Raphael 800, Rhodium, Tilt 2 & Topaz

    This thread is dedicated to FroYo, and NOT Eclair releases!

    First things first, this post is PURELY an instruction guide for noobies that aims to reflect the latest status and downloads (give or take a day).
    I am not an Android developer, I do not create any of this software... this is done by far more talented people than I. This thread is purely to collate the latest info for Android on Windows Mobile HTC devices and make deploying Android on your device as simple as possible.

    If you have new information that should be added to the guide (and is relevant for ALL folks) then feel free to add to the thread and I'll update the OP frequently.


    These opening few posts should have ALL the latest info you need to get started (no need to trawl through the threads).
    The only time you 'might' need to look in the thread is for 'breaking news' info that is no more than a day old...i.e. The Opening Post is the place!


    Credits: There are too many to mention, and many are unknown, but basically the guys poring Android to our devices should be thanked, along with all those making the effort to help others test, document, or use their work (along with those who provide answers to the same questions, time and time again). These are the guys who deserve the credit. From memory...
    osamaa,
    babijoee,
    phhusson,
    herpez
    scanny
    klinux
    Oliwe
    and many more



    What's New?
    Latest Update: 03 Sep 2010 (V1.6)
    • InitRD - 20100813-b11116a
    • Rootfs - 20100828-c29a486
    • System - XDAndroid 2.2.AOSP.3.9.10.RC.2.2
    • Kernel - 20100830_01302 (no debugging)
    • Headset support - Credits to Oliwe
    • 3D support for Blackstone/Diamond/Raphael (Rhodium/Topaz have no 3D)- Credits to Oliwe
    • Gallery working - Credits to Oliwe
    • Touchscreen Calibration is back! During first clean install, touch each of the five calibration points CAREFULLY to calibrate your screen before installation completes. Plus, general touchscreen fixes and power off support - Credits to Oliwe
    • Back to basics System... stock Android system.
    • Takes about 5 mins usage before the system starts to speed up, so expect it to be a little sluggish for the first 5 mins.
    • None 3D devices may not show boot screen, so please be patient during install (screen will show black)
    • I'd advise that once installed, you also launch SpareParts, and configure the window animations etc to 'fast'
    • There is a chance that after installation, some Startup.txt settings MAY be incorrect for your device. If you discover any mistake, PLEASE let me know, I will correct asap. I need your help on this guys.


    How To Install (CAB Version)
    • Step 1 - Prepare your SD Card
      Find a nice clean SD card to load Android on.
      You can either format your card to get it entirely clean, or you can leave all the files you may already have on there.
      *Warning* - If you have valuable data on your card, back it up. Android is usually safe, but if you can't afford to lose the data on your card, don't risk it!
      Some cards have difficulty working, there is a POSSIBILITY this is due to the formatting of the card. If in doubt, format to FAT32, not FAT16

    • Step 2 - Download and install the CAB
      Download and install the following 'full package' cab (a collection of ALL the files you'll need to run Android on your device) by clicking the XDAndroid Cab button below.



      You MUST install on the Storage Card. The cab file will take a couple of minutes to install Android. Please be patient.

      For those that are interested the cab files does the following:
      - Installs Android in the root of the SD Card
      - Deploys the correct Startup.txt for the device (the user can choose their device type)
      - Adds a high res icon for Android in the root of the SD Card
      - Installs a shortcut in Program Files named "Android" (launches Haret.exe)
      - Installs the high res icon in the registry for WM6.5 users


    • Step 3 - Run Android
      Android is now installed... So launch 'Android' from your Program Files menu in WinMo. Your phone should reboot into Android with 2 quick vibrations.
      Have patience... the first time you do this can take a LONG time (3 mins or more). During the first boot on SOME devices, you will be asked to calibrate the screen. This is very similar to Windows Mobile screen calibration (except it's in text mode).
      The reason the first boot takes longer is that Android is 'preparing' your device for the first time. :)

    How To Install (ZIP Version)
    • Step 1 - Prepare your SD Card
      Find a nice clean SD card to load Android on.
      You can either format your card to get it entirely clean, or you can leave all the files you may already have on there.
      *Warning* - If you have valuable data on your card, back it up. Android is usually safe, but if you can't afford to lose the data on your card, don't risk it!
      Some cards have difficulty working, there is a POSSIBILITY this is due to the formatting of the card. If in doubt, format to FAT32, not FAT16

    • Step 2 - Download and extract the ZIP
      Download and install the following 'full package' zip(a collection of ALL the files you'll need to run Android on your device) by clicking the XDAndroid zip button below.



      You MUST unzip to the ROOT of the Storage Card. The zip file will take a short while to extract. Please be patient.


      Once you've extracted the zip:
      - Click Auto-Setup.exe to configure XDAndroid for your particular device


    • Step 3 - Run Android
      Android is now installed... So launch 'Android' from your Program Files menu in WinMo. Your phone should reboot into Android with 2 quick vibrations.
      Have patience... the first time you do this can take a LONG time (3 mins or more). During the first boot on SOME devices, you will be asked to calibrate the screen. This is very similar to Windows Mobile screen calibration (except it's in text mode).
      The reason the first boot takes longer is that Android is 'preparing' your device for the first time. :)


    If you want to exit Android and go back to Windows Mobile, then you need to shut down / reboot. To do so with the latest Android releases, hold down the 'end call' button until you see a menu appear.
    If this fails to work, then the only option is remove the battery or press the reset button.



    Known Issues
    Many things are still not working properly, and the developers are fully aware of 99% of them.

    • SDCard - Most SDCards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
      Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
      Fix 2: Edit your startup.txt file and add these entries to your cmdline:
      set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
      msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
      "

      Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
    • SDCard - A few users have claimed to have had trouble using their SD Cards after installing XDAndroid. Some of those have reformatted the SD Card, and it worked, some couldn't recover it. This is a minority of users, but be warned.
    • Camera - Not working
    • GPS - working
    • Battery Status - Highly problematic for most users (don't trust the capacity Android tells you, it's simply up and down a lot, and highly inaccurate)
    • WiFi - Working for most people, suspected to cause slight heat, definitely drains the battery faster than WinMo.
    • Audio - Speaker working for most people, microphone can have issues
    • Deep Sleep - Working for most people, but can have issues waking up (sometimes, it will not wake up)
    • GPRS - Working
    • 3G - Working for most
    • PIN Code - Unknown
    • GSensor - Working (Screen only handles 0 and 270 degrees)
    • Bluetooth - Experimentally working (don't expect too much, but it's working for a number of users)
    • OpenGL ES - 'should' be working but only for Blackstone... more to follow soon
    • USB - Supported, but will NOT operate in mass storage mode. You can charge via USB and you can debug, but forget accessing your files by it.
    • Headphone Socket - Semi working (see FAQ for details on how to make it work)
    • Application Errors: It's very common to see 'Application (xxxxxx) is not responding: Force Close or Wait'. Click wait. I do not know the precise reason for this, but from what I can gather, it COULD be related to the slow speed of the SD Card causing the app response times to JUST be a little too slow for Android's liking, thus causing the message. This seems to happen more after bootup or wakeup when the device is busy doing stuff in the background.
    • Cannot choose ringtones: This is believed to be caused by the media scanner failing (due to discovering some filenames with none English characters). The best option of all is to use a CLEAN SD Card. But, if you insist on hosting other files on the same SD Card, you MUST make sure they have English character filenames.
    3
    for all those having problems with this build there are two newer builds out here they are
    this is the full package
    DoWnLoAD

    this is the newest build
    DoWnLoAd

    Remember if you do the full package reformat sd card. if you are using the newest build delete data.img and modules.tar.gz and replace with new modules.tar.gz and zimage android will build a new data.img on boot
    2
    Hi,
    Here is what I've done:
    After Formatting to fat32 and copying the content of both zips I still needed a startup.txt for my blackstone, so I took one from the startup configs of the 2.2V1.6, but I wonder, since android freezes after a few moments, is it the right thing to do? :confused:

    Here is its content, should it work with this last build?

    set ramsize 0x10000000
    set ramaddr 0x10000000
    set mtype 2030
    set KERNEL zImage
    set initrd initrd.gz
    set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=528 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3 msm_blackstone_pad.vibrate=1"
    boot

    If this is not right then what should be the best "startup.txt" for non-overclocked Blackstone ?

    I've tried with the startup.txt that came with the first zip, same results.

    Here is what my startup.txt looks like for those who need one the download is below just edit out the andboot out of downloaded one

    set ramsize 0x10000000
    set ramaddr 0x10000000
    set mtype 2030
    set KERNEL zImage
    set initrd initrd.gz
    set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=528 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3 msm_blackstone_pad.vibrate=1 lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3 msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
    boot

    Download


    maybe a strange question but will this be updated?
    last update is from september
    i want to put this on touch pro 2 but if a update is coming soon i will wait for it:p

    Here is the latest build 12-18-10

    Download
    1
    reserved

    reserved reserved reserved 2
    1
    See above your post. I do have a copy of both if you think you still need/want it.
    :cool: