You already have this radio (1.31a. 32.45 16_2) as per your other post which I've also quoted.
Sent from my Evita
[STOCK ROM] Telstra Android 4.2.2 / Sense 5 - 5.06.841.1-5.08.841.6 & NEW 5.08.841.8
- Thread starter radavs
- Start date
You already have this radio (1.31a. 32.45 16_2) as per your other post which I've also quoted.
Sent from my Evita
If you're right, and I thank my advisors
that was only a mistake the my first quote
Ask first for the radio to TELSTRA HTC 3.17.841.9 (base android 4.1)
and now I ask the radio Telstra_5.06.841.1_Radio (base android 4.2)
I understand that they are different
I explain briefly, I'm from mexico and I understand here to handle the same bands that in australia,
believe me, even experiment little fail with my data
by that to know correct to install the radio Telstra_5.06.841.1_Radio
I would like to know how to do this installation
Last edited:
Before we go any further, post your current radio (baseband) for us. It's in Settings/About Phone.
Sent from my Evita
I found the original thread, and I had this information
http://xdaforums.com/showthread.php?t=2119610
5.06.841.1
File Timestamp: 18/07/13
Publically Seen: 02/09/13
Android: 4.2.2
Kernel: 3.4.10-g08ef01e
hboot: 2.15.0000
radio: 1.31a.32.45.16_2_10.141.32.34a
adsp: 33.1.0.45.1128
wcnss: 1031145
tp_syn3202: 3.2_PR1293981
tz: 001.138.019
sbl1: 001.138.003
sbl2: 001.138.007
sbl3: 001.138.005
OTA: OTA_EVITA_UL_JB_50_S_Telstra_WWE_5.06.841.1-3.17.841.9_release_328260om1ifk3r8um88i2c.zip
RUU: N/A
Source: evitaul-jb-crc-3.4.10-08ef01e.zip
now compare it with the information on my phone, and it's exactly the same, using the same radio and all the other
Thank you, your always help me
I've been using the rom for a couple weeks and was using the Beastmode kernel keeping the 3.17 radio and 2.14 HBoot.
It worked well without issue but I wanted to try the new radio. I flashed the new radio and seemed to have similar reception.
I'm SOFF so i figured I'd update the HBOOT to 2.15 when I did this however my signal strength weaken. I switched the HBOOT back and forth several days and it seems the 2.14 HBOOT works better with the 1.31a radio.
I didn't think the HBOOT effected the reception am I doing something wrong?
It worked well without issue but I wanted to try the new radio. I flashed the new radio and seemed to have similar reception.
I'm SOFF so i figured I'd update the HBOOT to 2.15 when I did this however my signal strength weaken. I switched the HBOOT back and forth several days and it seems the 2.14 HBOOT works better with the 1.31a radio.
I didn't think the HBOOT effected the reception am I doing something wrong?
I actually had the opposite experience. I flashed the 1.31 radio while on the 2.14 hboot and my signal was absolutely terrible. Back to the Telstra 2.40 radio and it's been fine again.
Sent from my Evita
Have finally had enough of CM10.2 and random reboots, loops and everything in-between so going vanilla for a bit. Don't think I've used a stock ROM in over a year. Couple things though,
- Since this is odexed, does the usual mail.apk replacement trick to get around exchange security work?
- What is the deal with HTC reporting? Says that its a test device and turned on regardless of settings?
Edit: Scratch that, as per usual I can never get a bloody sense build to do BT audio streaming properly. Works perfect first connect and never again after that (constantly skips) regardless of app, reboot etc. Has done it with every sense build I've tried in the past 12mths. CM10...perfect. Despite being a phone, google play music streaming in the car seems to be more important than calls lol.
But FWIW, the Sense 5 Toolbox module for XPosed worked well for status bar, advanced reboot and some other things. And good job on the ROM none the less
- Since this is odexed, does the usual mail.apk replacement trick to get around exchange security work?
- What is the deal with HTC reporting? Says that its a test device and turned on regardless of settings?
Edit: Scratch that, as per usual I can never get a bloody sense build to do BT audio streaming properly. Works perfect first connect and never again after that (constantly skips) regardless of app, reboot etc. Has done it with every sense build I've tried in the past 12mths. CM10...perfect. Despite being a phone, google play music streaming in the car seems to be more important than calls lol.
But FWIW, the Sense 5 Toolbox module for XPosed worked well for status bar, advanced reboot and some other things. And good job on the ROM none the less
Last edited:
Mate I did nothing to this rom other than give it root access. So you can thank HTC for your issues! :laugh:
On a serious note, If I knew how to set up Xposed running from installation I would have made a custom rom from this as I'm really not a developer! :silly:
UPDATED OP New stock rom with latest OTA
There really aint much at all. Mostly just recompiled apps, kernel, recovery, hboot and a bunch of libs etc.
http://diffchecker.com/nt88j4mc
I think there was a single bug that they squashed, I just dont know what it is.
Maybe Telstra moaned that they had a lower version number
---------- Post added at 09:14 AM ---------- Previous post was at 08:55 AM ----------
The bug resolved may be "When the phone is set to vibrate, the ability to control vibrate notifications on a per app basis is disabled." that was reported on Telstras Crowd Support by jazacoop.
Or maybe just the update of Telstra one app from 3.2.2 to 3.3.0
http://diffchecker.com/nt88j4mc
I think there was a single bug that they squashed, I just dont know what it is.
Maybe Telstra moaned that they had a lower version number
---------- Post added at 09:14 AM ---------- Previous post was at 08:55 AM ----------
The bug resolved may be "When the phone is set to vibrate, the ability to control vibrate notifications on a per app basis is disabled." that was reported on Telstras Crowd Support by jazacoop.
Or maybe just the update of Telstra one app from 3.2.2 to 3.3.0
Last edited:
Question: If we update with the OTA, will we lose root? I am S-OFF so I can just flash SuperSU over the top but just wondering before I click the button.
No, rebootRUU mode is for signed HTC images not custom ROMs.
Just install it from custom recovery like the install instructions explain.
OK so I dont know if this was asked before but I cant find it in the thread. I am having problems with the ROM once I de-odex it. I dont know if its my phone or what it is. works fine as odex but i have problems when i try to de-odex it using android kitchen. is there a way to fix this.
Similar threads
- Poll
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
28[STOCK ROM] Telstra Android 4.2.2 / Sense 5 - 5.06.841.1-5.08.841.6 & NEW 5.08.841.8
Hi All
For all the Aussie's (and anyone else) Developers out there,
I'm introducing the Telstra stock rooted JB 4.2.2 Sense 5 ROM based on Telstra full upgrade phone dump. Feel free to use as base for your own work or use this ROM to do as you choose.
ADDED 5.08.841.3 UPDATE
ADDED 5.08.841.6 UPDATE
ADDED NEW 5.08.841.8 UPDATE
This will install the stock up to date kernel so you must be S-OFF as you risk a brick !
DISCLAIMER
I can't and will not take any responsibility whatsoever for any anything that may happen to you or your phone as a result of flashing this ROM!
REQUIREMENTS
Must be Unlocked and Rooted and have S-OFF!
INSTALL INSTRUCTIONS
Make a Nandroid back up before installing
Download zip and place on sdcard;
Boot into recovery via fastboot
I say again make sure you have a Nandroid back up before installing!
Factory reset device
Make sure Zip file signature verification is unchecked/not on
Install zip from SD card
Reboot and enjoy!
Don't forget that you should update SU Binaries immediately after install if needed!
NOT WORKING
you tell me
LINK to 5.06.841.1
Stock Telstra JB 4.2.2 - 5.06.841.1 Rom with Root access
MD5:
8cf9d635123f2adafb6f59ec0bb2100f
LINK to 5.08.841.3
Stock Telstra JB 4.2.2 - 5.08.841.3 Rom with Root access
MD5:
99652864b059895cc3085e1341413723
LINK to De-odexed 5.08.841.3
Stock Telstra JB 4.2.2 - 5.08.841.3 Rom with Root access DE-ODEXED
MD5:
73447bb462b60d4ecc13932870ea3270
LINK to 5.08.841.6
Stock Telstra JB 4.2.2 - 5.08.841.6 Rom with Root access
MD5:
3211577675b1790d4482d4d56b522cfb
LINK to De-odexed 5.08.841.6
Stock Telstra JB 4.2.2 - 5.08.841.6 Rom with Root access DE-ODEXED
MD5:
475577ac43d10b84539febe8256ed6a6
LINK to 5.08.841.8
Stock Telstra JB 4.2.2 - 5.08.841.8 Rom with Root
MD5:
ebd51587b9e18aaa46410f42e7d3d5867Aright guys,
Let's everyone just chill out here a bit.
Yes one needs to search for answers, but if they do not know where to look and they are posting a question about a ROM in a ROM thread (not like they started a new thread) and the OP doesn't seem to mind, let's not get overly zealous about telling them to Search! Search! Search! because it needlessly creates arguments.
Let's work together to help each other out and cut out the ranting and raving and flaming. If you believe someone's posting habits are antipathetic to the purpose of these forums then report the post, but lets not clutter of this guy's thread with in-fighting.
Thanks5Notes:
-After installing you have the option of having blinkfeed installed or not(clear it via notification)
-If you experience data drops, flash zarboz's kernel
-And/Or download firmware update from Turge's Stock Rom
BUT MAKE SURE YOU READ THE INSTRUCTIONS
Things that work with this ROM
- Beastmode Reloaded 3.5 kernel
Things that DON'T work with this ROM
- You tell me
-I don't know if zoe mod works with this(it should) as I don't care for this mod5I can understand most peoples frustration but from my testing I can confirm that if you are on the 1.09 Hboot and you use any of the JB 4.2.2 roms you are going to have these issues. As soon I upgraded through all Hboots(RUU+OTA's) to 2.15 I have had trouble free service on a stock & beastmode kernals.
NOTE: updated second post
