CyanogenMod 10.1.2 | Jellybean 4.2.2 - KANG
CyanogenMod is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, an enhanced reboot menu, support for Wi-Fi, Bluetooth, and USB tethering, CPU overclocking and other performance enhancements, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as wi-fi, Bluetooth and GPS), app permissions management, as well as other interface enhancements. CyanogenMod does not contain spyware or bloatware. In many cases, CyanogenMod may increase performance and reliability compared with official firmware releases.
Source: CyanogenMod Wiki
Screenshots
Installation Instructions
Requirements
* Rooted (obviously)
* Firmware 3.32/3.33. Read this post for more info and download link
CLICK HERE
Installation
1: If you are coming from another ROM do a full wipe
1a: if this is just an update to THIS ROM BASE you can simply wipe cache and dalvik cache
2: Flash gapps (download below)
3: Reboot
3b: If you want to make changes to the CPU/GPU clock speeds, I/O, or CPU governor settings, edit /system/etc/init.d/99kernel (outlined below)
4: Enjoy CyanogenMod 10.1
Please read the whole post for changelog, Download links, and other important info
Please also take the time to check out this great FAQ and General Support thread created/moderated by Skipjacks It contains a lot of useful information, It would also be great if users try to keep general Q&A questions and other ROM discussion in this thread, It will help weed out the non-development posts and make things go fater for me, which means faster development for you
Updates:: CM has reached 10.1 stable. I will still release bugfix updates if needed but this should be as stable as stable can be on the Sensation. Here's to AOSP 4.3
.
As always: remember it takes a FULL charge from AC, and a full discharge then re charge batteryt to be accurate. Also leave it plugged in for up to an hour at 100%, Another thing i find helps battery life is to make custom auto-adjustment values if you use auto-brightness. Check below for full changelog Feedback always welcome Please read the Kernel section for more info and full config options for the kernel.
Albinoman887
Working
SMS/MMS
Wi-FI
Data
GPS
Audio
Radio
Camera
Gnow
SD Card
Bluetooth
H/W Accelerated Video Playback
Native Wi-Fi Tethering
1080p Video Recording
Not Working
??????????
Changelog
Aug-6
* Fixed issue with microphone not working in apps
* Synced with upstream
Aug-4
* Synced with upstream, this is probably gonna be the last cm-10.1 build unless there is a bug fix or something as development has died down on that branch
* Got a dedicated server as a mirror with super fast internet connection. i'm still gonna use goo for the ota updates but the link here will be to the new server
July-20
* CM was tagged 10.1.2 - Security fixes
* Any upstream CM changes since last release (a lot of "under-the-hood" changes)
* Sweep2wake issue with waking on home might be fixed
July-10
* CM was tagged 10.1.1
* Fixed issue with flashlight turning off when screen is off (finally, yay)
* Upstream Changes
* UNTESTED: Fixed issue with sweep2wake and home button waking screen
July-2
* Fixed settings FC when removing an app
* Fixed rare issue of trashed framebuffer (garbled display)
* Kernel: Added FauxSound (requires app)
* Upstream Changes
June-26
* CM-10.1 is now tagged stable!
* ROM is now compiled with linaro and -o3 optimizations
* Misc cleanup
June-10
* Kernel updated to Linux 3.0.80
* Bugfix: Incorrect report of data-usage (upstream bug)
* More Upstream changes - CM-10.1 RC5 mainly
* Sorry for the delay of relase was enjoying the rare good weather around here
June-1-build2
* Superuser bug from last release is fixed now
* Kernel updated to Linux 3.0.80
* Some upstream changes
June-1
* CM is now RC3/4
* Really fixed issue with no audio in hangouts
* Tried to address reboots in last build by reverting the pmem change a week or so ago
* Many upstream changes
May-24
* Reverted back to Linaro GCC 4.7 (I think it might have been causing some hard-reboots, plus we get better benchmarks with 4.7)
* Upstream: Updates to audio-caf repo that should fix the issues with the new Hangouts
* Now CM-10.1 RC2+
* Various upstream changes (mainly translations and a few minor bug fixes)
May-17
* In very rare cases the framebuffer was being trashed which was causing screen flicker, this is now fixed
* Fixed bug with homescreen and big margins on clean install
* Kernel now compiled with Linaro GCC 4.8 toolchain (more optimizations)
* Upstream Changes: CM-10.1 RC2
May-10
* Kernel: Switched back to PM_MAX (low-power wifi) when screen is off, no real benefit
* Kernel: Added a couple build optimizations to GPU drivers
* Kernel: Updated to Linux 3.0.77
* Upstream Changes (CM is gearing up for RC1)
May-3
* Reverted T-Mobile data drop change to as it caused issues with data. Users who still want this patch can find it in the build.prop as a comment, Delete the # and the above line and save
* Fixed a few remaining issues with charging docks
* Enabled UID stat in kernel, Allows data usage stats.
* Re-enabled scrolling tweaks
* Upstream changes
May-2
* Fixed bootloops with charging docks that also have MHL support (no this doesn't fix MHL)
* Kernel updated to Linux 3.0.76
* Fixed data drop issue on T-Mobile
* Upstream changes
* Minor code cleanup
May-1
* All glitches during video playback fixed (all credits go to arco for finding this fix)
* Some updates to PMEM driver in kernel
* Various other updates to kernel from CAF jb kernel
* No longer using forks of frameworks/native or av due to our patches being merged
* Upstream Changes
April-26
* Enabled Fast-charge by default
* Removed debug.composition.type to fix ghosting
* Tried to address battery drain by reverting the updated battery drivers
* Re-merged ondemand governor from old kernel (trying to fix battery drain)
* Kernel updated to Linux 3.0.74
* Upstream Changes
April-23
* Kernel: Lots of updates to framebuffer from CAF jb-chocolote.
* Kernel: More updates to vidc from CAF kernel.
* Kernel: Spped optimizations and tweaks, minor but noticable
* Bugfix: Tearing
* Various Upstream Changes
April-19
* Switched debug.composition.type build.prop setting back to "dyn" (seems to save battery)
* Display: Display repo is now real cm-10.1 source just with pmem support added back in (old repo was cm10 code)
* Display: Tweaked auto-brightness ranges, and added an extra step, seems to save battery
* Media: Media repo is now real cm-10.1 sorce with pmem support
* Kernel: Updated KGSL/adreno drivers(caf) for repo with new display repo
* Kernel: Updated genlock(caf) for use with new display repo
* Kernel: Sweep2wake hack added (should fix freezing touch screens, (to a point, not completely)
* Kernel: Switched ondemand governor back to one included in msm8660 kernel (was using old one)
* Kernel: Updated to Linux 3.0.73
* Credits: All credits or the display/media updates goes to arco
* Upstream Changes
April-13
* Bugfix: Tried to address remaining lag issues by tweaking kernel (all changes listed here were in my kernel test build)
* Kernel: Reverted mpdecision to old version
* Kernel: Reverted patch to force GPU to scale one freq at a time
* Kernel: Removed duplicate dynamic fsync procoess
* Kernel: Set readahead buffer back to default (128kb)
* Kernel: silenced some useless logging in DMESG
* General Upstream Changes
April-11
* Bugfix: all lag should be gone now, somehow the build was curupt
* Bugfix: logcat spam of HWC_FRAMEBUFFER_TARGET
* Bugfix: 3D GPU OC wasn't being set correctly because there was a missing chmod line, added.
* Switched back to gpu.composition.type to gpu, its the defualt in 4.2 and has best performance
* Switched to audio-caf variant (repo) I fixed the VOIP bug with it before. hopefully this will fix the "robotic" calls some people have (audio also seems to be a higher volume)
* Tweaked the display repo to help with video glitches
* Kernel: KGSL updated to CAF (seems to give better gpu performance, and higher benchmark) (credis: midnight88)
* Kernel: adreno updated to CAF (more up to date) (midnight88)
* Kernel: msm updated to CAF (midnight88)
* Kernel: some upstream patches to vidc (jb-mr1-chocolote) CAF
* Kernel: properly added Sweep2Wake
* Optimized the kernel a bit more
* Lots of upstream changes. (pretty sure M3 was tagged)
* maybe some other litte things I forgot, check github
April-7
* Kernel: Complete rebase off of msm8660-common kernel, All the speed and features of my original kernel are still there, just streamlined for easy merging of new caf stuff
* Kernel: updated to Linux 3.0.72
* Kernel: Updated vidc drivers to jb-chocolote from caf (1/2)
* Kernel: Updated vidc drivers to jb-mmr1-chocolote from caf (mr1 = aosp 4.2) (2/2)
* Kernel: Updated adreno drivers (note: we are still using old libs)
* Kernel: Updated bluetooth to jb-chocolote from caf
* Kernel: Updated qdspv6v3 to jb-chocolote from caf
* Kernel: Added USB HID support to kernel
* Kernel: Added USB OTG to kernel
* Kernel: Added updated mpdecision by showp1984
* Display: hwcomposer updated to 1.0
* Display: kernel now correctly reports refresh rate to gralloc
* Display: Allow to build with MDP-4.1 (somewhat fixes video artifacts)
* Switched composition.type=dyn to mdp in build prop
* Updated vidc firmware to match new vidc in kernel
* Updated liblights
* Fixed build.prop so GooManager will notify of new versions
* Lots of upstream Changes (check gerrit for details)
* Bugfix: Upstream: cLock: switched to new API (old one was taken down???)
* Cleaned up kernel config script
* Bugfix: Fixed HWC in framebuffer target logcat spam
* Bugfix: blending in video playback bug has been somewhat squashed, not 100% yet, tested with BSPlayer
* General cleanup
Mar-31
* Added x264 1080p video recording and camerawrapper commit from gerrit
* Thumbnails for recorded videos are now fixed
* Increased wi-fi scan interval a bit
* Fixed disapearing OSD in video player etc (no need to disable h/w overlays)
* Cleaned up display-legacy repo
* Upstream Changes
Mar-28
* Added setting to allow lockscreen to rotate (disabled by default) you must uncomment the lockscreen_rot_override line in build.prop
* Upstream: Removed Pie settings for devices with hardware keys
* Other upstream changees. Check review.cyanogenmod.org for details
Mar-27
* Switch to PM_FAST when screen is off
* Frameworks/av is now 100% CyanogenMod (cyanogen added legacy camera prarms so evervolv cherry picks are not needed)
* Host of updates to media and display
* Upstream Changes
Mar-24
* Reverted change to PM_FAST as there was no benefit and comsumed more battery
* Added lazy and conservate CPU governors to kernel
* Raised Volume levels a bit (thanks erraggy)
* Tried to address video tearing (not completely gone)
*
Upstream Changes
Mar-22-build2
* Sorry completely borked the audio_policy.conf, fixed now
Mar-22
* Fixed GooManager not notifying about updates, After this build install it should notify you
* Re-enable FM Radio (got lost in merge)
* dalvik cache is back in cache now
* Kernel base updated to Linux 3.0.70
*
Upstream Changes
Mar-21
* Merged my device tree with Team-Hydra repo, All future roms will be based on this, Check OP for details
* Updated Kernel base to 3.0.69
* Added frandom support to kernel for people who want it
* Switched to PM_FAST in kernel (high power wi-fi when screen is off)
*
Host of upstream Changes
* Cleanup
Mar-15
*
Upstream Changes
Mar-14 (internal)
* Upstream Changes (mainly translations)
Mar-13 (internal)
* Re-added a couple build.prop settings (mainly data/network related)
* Disabled libv8 optimizations since we don't have the correct qcom props (thanks intervirgil)
* Forgot to change governor to ondemand when i added back the configs for it in the init script
* Cleaned up the sweep2wake configuration
* Changed kernel version string back to ChronicKernel, Kernel is so heavily modified now it deserves it's own name
* Upstream: frameworks/base: Added Volume Tile to Quicksettings
* Upstream: Phone: Settings: do not override network mode on read
* Upstream: cLock: Fix error when the weather data from Yahoo is incomplete
* Many upstream translations changes and other small things not worth listing here
Mar-11-build2
* Reverted the removal of CPU min/max freq, CPU gov, and I/O (ondemand still default)
* Upstream changes
Mar-11
* Updated kernel base to Linux 3.0.68
* Removed settings from kernel init script that can be configured in CM's Performance settings menu
Note: init script still sets min cpu freq to 384mhtz as its still strongly advised
* Set default governor to ondemand
* Added support in kernel init script to enable tun.ko
* Upstream changes. I think there were some updates to DeskClock (alarm clock) and a few other minor updates
Mar-9
* Fixed video recording with FFC. If you still get Force Closes clear data and cache for Gallery
* Imported bruce's media_codecs.xml and media_profiles.xml (this is what fixed FFC video recording)
* Minor upstream changes
Mar-8 (Internal)
* Fixed Volume Rocker Wake not showing in Settings>Display
* Reverted CRT Hack in kernel - Not needed for cm-10.1
* Now using Team-Hydra display-legacy and media legacy repos as they are maintained
* Switched to Team-Hydra frameworks/av repo as it has a more complete Camera patch
* Merged new KGSL from bruce's kernel
* Upstream Changes including new weather icons for cLock
* Minor cleanup and changes
* Wallpaper reseting to default should be fixed (I guess this was a side-effect of small PMEM MDP)
Mar-7
* Minor tweak to pmem to fix AOSP_BASE growing into framebuffer (very rare that this would happen anyway but fixed)
* Switched back to the other display-legacy and media-legacy repos i was using as they are being kept up to date by the maintainer
* Upstream changes
Mar-6
* Finally figured out the math behind mapping pemem so I could increase its size without trashing FrameBuffer
* Soft-reboots should be gone now due to the PMEM increase
* A Couple cherry-picks that might help with video playback (probably not though)
* Upstream: Switched to new superuser by koush
* Other upstream changes I don't remember. Check Gerrit for details.
Old Changelogs
Kernel
ChronicKernel
Kernel now
based on Bruce's kernel with a few changes by me, including:
* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2
* Increased PMEM_MDP as it is needed in Android 4.2.2 to fix soft-reboots
* PM_FAST enabled by default (high power wi-fi when screen is off)
These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.
Other Features of the kernel include:
* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
* Sweep2Wake
You can edit many of the settings in /system/etc/init.d/99kernel, here is a snippet of the script with all the config options
Kernel init script: Click Show Content to expand
Bugs
* MHL doesn't work
* Sweep2wake sometimes causes issues with the proximity sensor during calls
Notes
*
As of Feb-19 CyanognMod changed the way the reboot menu works. To enable the "Advanced Reboot" menu with recovery and bootloader go to Settings>Developer Options and
Check Advanced Reboot
* As of AOSP 4.2.2 ADB now has a whitelist feature. On first connect with adb it will say
device offline You need to
update your ADB then with the
phone connected. Disable and Re-Enable Android Debugging in the Developer Options menu. It will ask if you want to a
ccept and show the PC's RSA key. Select Yes and it will now work as expected
* If your homescreen does not look right (big margins) go to System Settings>Launcher>homescreen[/B] click
Stretch screens. Then
choose grid size and set rows to 5.[
*
As of AOSP 4.2.1 Developer Options and Performance setting menu options are hidden until you
go into about phone and tap build number repeatedly (aprox. 6 times) this only needs to be done once
-2
*
If you are having a lot of soft reboots when waking the device
set you min CPU freq. to 384htz in Performance settings. (What? no Performance settings? ummm look up hehe)
* If you are coming from
another ROM i highly recommend you perform and
Wipe Date/Factory Reset in recovery menu when applying this ROM.
* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip
* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again
* For the best battery life I suggest the stock settings with the exception of the ONDEMAND governor. Switching to BADASS will yield best battery results
DOWNLOAD
ROM :
cm-10.1-20130806-Albinoman887-pyramid.zip
Gapps :
gapps-jb-20130301-signed.zip
Goo.im Repo :
CLICK HERE
* This ROM can also be downloaded directly with GooManager *
Source Code
Team Hydra Github (main):
https://github.com/Team-Hydra
CyanogenMod Github:
https://github.com/CyanogenMod
Personal Github:
https://github.com/Albinoman887
Credits
* First off of course cyanogen, the CyanogenMod project and all who contribute.
* Bruce2728 for doing all the leg-work originally to get get CM-10 on our Sensation, most of which was used for CM-10.1
* Evervolv Team for their device tree. This was largely what was needed to get the build going.
* mikez for all his work on the Evervolv/pyramid tree.
* NLJ for making the diff patch of Evervolv's frameworks_av repo to get camera working
* jiggs82 for all his helpful hints.
* And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
* dastin1015 for answering all my n00bish questions, and providing helpful hints and solutions
* android1234567 for all the help with the kernel, without you we wouldn't have new kernel
* tarfu for fixing camera p2z
* blahb14hblah for his hint to the extra scrolling tweak in frameworks/base
* NLJ for fixing the Sweep2Wake proximity sensor issue
* Skipjacks for maintaining the Q&A thread
* A bunch of thanks to arco, for all his updates to our kernel, our display libs, our media libs, and for fixing the video playback glitching, and for being a good friend and dev mentor.
Donations
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
For more information like compiling, see 2nd post
Happy Flashing
Albinoman887