[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release

Search This thread
By:
Advanced…
wizardknight

wizardknight

Senior Member
Nov 1, 2009
1,147
321
Seattle WA
nightcrawler218 said:
Finally Found the FRX07.1 ROM over the internet. ( http://www.ulozto.net/xQsYaUs/frx07-1-full-bundle-20110901-zip )
Installed it as directed. All is ok. Now I tried to upgrade to gingerbread. Since the FULL BUNDLE link is dead in the thread ( http://xdaforums.com/showthread.php?t=1167334 ), I downloaded the SYSTEM.EXT2 file fron the above link & put it to my FRX07.1 build & run the android mode via haret.exe. The result is satisfactory, I can see the android verion in the settings tab as 2.3.3 BUT the apps package (which was already in the froyo build) is not working. I have only replaced the froyo SYSTEM.EXT2 file by the gingerbread SYSTEM.EXT2 file & didn't even touch the android apps folder of the build.

No Google play,
No Explorer,
No Superuser,
No APK INSTALLER,
No USB drivers ( When I connected the phone to the PC, it says ERROR INSTALLING DRIVER )

Can you tell me how can manage to upgrade my phone with the following resources.... FRX07.1 FULL BUNDLE & Gingerbread SYSTEM.EXT2 file. How to inject the apps..? The apps are working in the froyo version.

Thanks for your constant support.
Click to expand...
Click to collapse

You can't really mix and match these two.
Google shows this as a download option.
http://www.4shared.com/zip/IOncyBDa/GBX0C_Full_Bundle_20120424.html
 
  • Like
Reactions: nightcrawler218
N

nightcrawler218

Senior Member
Jun 25, 2012
159
18
Kolkata
Redmi Note 9 Pro
Thanks again for your generous support. just downloaded the zip file. gonna add the .csv files as directed in the GBX0C thread's 1st post ( http://xdaforums.com/showpost.php?p=20866931&postcount=1 ). Lets see what happens.

One more thing, In your last link you provided the NAND version. There was some KERNEL links also. This post (http://xdaforums.com/showpost.php?p=38987743&postcount=1111) says the 304 KERNEL is the most stable one. Can you please tell me how to add the kernel in the GBX0C bundle you provided. I mean which file of the Build has to be replaced by the latest 3.4 version file..?
 
wizardknight

wizardknight

Senior Member
Nov 1, 2009
1,147
321
Seattle WA
nightcrawler218 said:
Thanks again for your generous support. just downloaded the zip file. gonna add the .csv files as directed in the GBX0C thread's 1st post ( http://xdaforums.com/showpost.php?p=20866931&postcount=1 ). Lets see what happens.

One more thing, In your last link you provided the NAND version. There was some KERNEL links also. This post (http://xdaforums.com/showpost.php?p=38987743&postcount=1111) says the 304 KERNEL is the most stable one. Can you please tell me how to add the kernel in the GBX0C bundle you provided. I mean which file of the Build has to be replaced by the latest 3.4 version file..?
Click to expand...
Click to collapse

You can't cut the kernel directly from a nand version and put it into a SD card version. It requires some modifications to it's packaging. However there is this file you can try. Just swap out the contents of the zip.
 
  • Like
Reactions: nightcrawler218
N

nightcrawler218

Senior Member
Jun 25, 2012
159
18
Kolkata
Redmi Note 9 Pro
Thanks for being so supportive. My interest is growing day by day... In that SD Card Kernel thread something is mentioned about "Kexec" ( http://xdaforums.com/showpost.php?p=40595218&postcount=8 ) which I can see when I press down the power button. What is the significance of that button..? What is it meant for actually..?

Well, I have put the GBX0C in my SD and it is working fine from yesterday but I have noticed few things. After installing some apps from the Google Play Store when I Shut down the phone, it suddenly RESTARTS automatically. I have to then boot into WM & then finally I can Shut Down the phone...Weird :eek:

Another issue, After granting the root access for apps, when I finally want to execute some root access or system files alteration, it says cannot access root directory/ folder, and also cannot update the SUPERUSER over the Google Play store. Any clue..?
 
N

nightcrawler218

Senior Member
Jun 25, 2012
159
18
Kolkata
Redmi Note 9 Pro
I have installed the New Kernel. One more thing. The restart issue still hapeens & I noticed that, it is not due to the Google Market or anything. The HARET.EXE says "unknown publisher" & I have to press YES to get it working. In the previous HARET.EXE there was no such issues. GENYDUAL BOOT is crashing for the GRANT ACCESS process may be (I have to press YES in the HARET if I manually start it.) Also the GBX0C Haret is 159 KB where the FRx07.1 Haret was 164 kb.
I guess something is missing in the GBX haret, may be some developer signature or something.
 
N

nightcrawler218

Senior Member
Jun 25, 2012
159
18
Kolkata
Redmi Note 9 Pro
Android Restarts & Haret.exe issue

The Haret.exe shows a warning message of UNKNOWN PUBLISHER & can boot the android if I run it via WM file explorer but after a reboot or from the WM program menu if I select to boot android via GenYDualBoot, it shows the following error message.

"An error occurred on sub__main_bootandroid. Win32Exception. Continue?"

And Android RESTARTS automatically If I shud down the android.
 
wizardknight

wizardknight

Senior Member
Nov 1, 2009
1,147
321
Seattle WA
nightcrawler218 said:
The Haret.exe shows a warning message of UNKNOWN PUBLISHER & can boot the android if I run it via WM file explorer but after a reboot or from the WM program menu if I select to boot android via GenYDualBoot, it shows the following error message.

"An error occurred on sub__main_bootandroid. Win32Exception. Continue?"

And Android RESTARTS automatically If I shud down the android.
Click to expand...
Click to collapse

1st. You will get better responses if you post GBX0C questions in that thread rather than the FRX07.1 thread.
I have not touched this specific software in a two years, so I can't help you any further.
The newer kernel I pointed you to is not tested, and was posted just because we had it. So if you need to do trouble shooting go back to the stock released package.
 
  • Like
Reactions: nightcrawler218
N

nightcrawler218

Senior Member
Jun 25, 2012
159
18
Kolkata
Redmi Note 9 Pro
wizardknight said:
1st. You will get better responses if you post GBX0C questions in that thread rather than the FRX07.1 thread.
I have not touched this specific software in a two years, so I can't help you any further.
The newer kernel I pointed you to is not tested, and was posted just because we had it. So if you need to do trouble shooting go back to the stock released package.
Click to expand...
Click to collapse

thanks for all your support. will do as directed. this forum has really helped me out. you rock brother... \m/
 
W

William Sm

New member
Nov 9, 2018
2
0
Haret.exe not working.

I've tried installing from two bundles for android install on a HTC Touch Pro 2 ROHD100 from above zip files using 3 SD cards.

With the first SD card the screen scrolls for ever. I've left it running not for 10 minuets but for one and a half hours. It just hept scrolling . On one pause i read from the script "Can't Access tty" and then "job controll turned off".

With the other two SD cards no script is run to scroll on the screen but a form opens titled "HaRET Versin pre-0.5..3-2009121...." A text box is shown with "default.text" written in it and a button along side with "Run" on it. Pressing the button just brings up Error cannot open scipt file \Storage Card\defalt.txt

What is happening?
I really want have the option to run Andoid on my touch pro.

Can anyone help me out.

Regards William
 
You must log in or register to reply here.

Similar threads

Reefermattness
  • Locked
[CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference!
Replies
13K
Views
3M
madnish30
madnish30
A
[BUILD] **Complete Froyo Bundle!!** FRX06 - "Stable" - Minor Fixes
Replies
2K
Views
378K
N
nightcrawler218
A
  • Locked
[BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!
Replies
567
Views
217K
C
CodaHighland
A
[TESTING] XDAndroid GBX0C 2.3.7 Build
Replies
1K
Views
199K
N
nightcrawler218
tiad8
  • Locked
FROYO x GINGER ETA: PROJECT SOON TO BE DISCONTINUED
Replies
2K
Views
250K
tiad8
tiad8

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 65
    A
    arrrghhh
    FRX07.1 is here!!

    This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).

    Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!

    <<<This is a link to the... FAQ Click it!!>>>​

    I have created a complete bundle of FroYo with a stable kernel from GIT (August 19 / 1348), and rootfs from GIT (Sept. 2).

    Please, feel free to DONATE to the XDAndroid project!

    Every little bit helps!

    Directions:

    1. Download the full bundle (zip). (Updated September 1 2011)

    If instead you just want the system.ext2 (zip) (Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!

    2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.

    3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)

    4. Screen calibration - you have three choices:
    • Re-use an old ts-calibration file if you have it and you know it's good.
    • Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
    • Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one :p), reboot & go back to the newest kernel!

    6. Run haret.exe.. Profit! :D

    Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot ;).

    Troubleshooting:
    Please read the... FAQ
    If you have any issues with the kernel, feel free to change it:
    There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.

    See Incremental Updates for more information on updating the kernel and other components.

    Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!), Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.

    Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.

    Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.
    View
    18
    A
    arrrghhh
    stinebd's Changelog:​


    stinebd said:
    Here’s a new release for you, folks. This is a major release with a ton of changes, new features, and fixes. Our friend hyc/highlandsun did most of the heavy lifting for this release. Highlights include a rewritten RIL with support for world phones and greatly improved CDMA support; fixes for the media codecs; fixes for MMS on Sprint; increased security with the Superuser app.

    A list of changes is included below. The FRX07 system image is available for download now, and will require the use of a new rootfs image, also available now. Additionally, we have a new bundle containing everything needed to enjoy a full FRX07 system.

    Note: Due to the incredibly long list of changes, this is a somewhat condensed, terse changelog describing only the overall scope of the changes.

    FRX07:
    • frameworks/base:
      • Major frameworks changes for CDMA/GSM dual-mode worldphone support. (hyc)
      • Fixes for data connection handling to improve startup time. (hyc)
      • Fixes for wifi handling to avoid issues on hanged drivers. (hyc)
      • Stagefreight (media codecs) fixes. (hyc/viruscrazy)
      • Fixes for Sprint’s wonky MMS markup structure. (hyc)
      • Fix MediaScanner not finding audio files (including ringtones) in system.ext2
    • hardware/libhardware_legacy:
      • Minor GPS driver fixes. (Alex[sp3dev])
      • Rename wifi interfaces to wlan0 on all devices (hyc)
    • hardware/xdandroid-ril: Major RIL refactoring for improved performance on all devices, and added CDMA/GSM dual-mode worldphone support. (hyc)
    • packages/apps/Gallery3D: Switched back to Gallery3D as the gallery app (closes bug #111)
    • packages/apps/Mms: Fixes for Sprint’s wonky MMS markup structure. (hyc)
    • packages/apps/Phone: Fixes for CDMA/GSM dual-mode worldphone support. (hyc)
    • packages/apps/Superuser: Added the Superuser package for authorizing su privileges. This, along with our signed builds, provides greatly increased security for the end user (mostly against malicious apps from the Market).
    • system/extras/su: Added as a dependency for the Superuser package
    • vendor/qcom/android-open: Include missing stagefright codec symbols. (hyc/viruscrazy)

    To coincide with the FRX07 system image, the following rootfs changes have been made:
    • init.froyo.rc modifications...
      • Adjust wpa_supplicant service for the new abstraction provided by libhardware_legacy, as well as interface rename
      • Abstract the hciattach service to provide bluetooth support on both chipsets
    • Rename wifi interface to wlan0 on all devices
    • apns-conf.xml updated
    • keymaps completely reorganized, and RHOD end-call key has been remapped to be the Home key in Android.
    • default.prop: set ro.secure=1 to lock down the adb shell - su can be used with the Superuser app to authorize root access in adb if needed.
    Click to expand...
    Click to collapse
    View
    14
    A
    arrrghhh
    Layman's Changelog​

    (As in, the changelog I wrote :p)​

    FRX07.1 Changelog:

    • RHOD - all buttons on the front no longer wake the device. Only the power button wakes the device now.
    • Updated to the newest RIL
    • hyc's modified libs for video now baked in - *most* HQ YouTube videos (and other HQ videos) should finally work!
    • RHOD & TOPA - Userland (Android) now controls the LED by default now. If you need to debug sleep, you will have to change the behavior manually. See Detule's post on this topic.
    • Facebook sync should now work, out-of-box.

    FRX07 Changelog:
    • Updated RIL (thanks hyc!) - this covers many different bugs that were in the old RIL - I'm only going to cover the major ones...
      • CDMA now works correctly (for the most part). force_cdma (and north_am_dialing) is now deprecated (not needed/ignored!)
      • You can boot with a SIM in on a CDMA device and choose your GSM or CDMA on the fly under Settings.
      • Location based on towers now works on CDMA.
      • 1xRTT now displays correctly, but I never seem to get EVDO Rev.a... I always get 0. This is represented by a 3g icon, as this is what the Android framework provides.
      • Full MMS support! Please see this page for configuration instructions. Will need help fleshing out the list of carriers folks!
      • Spotty service, switching towers, etc should no longer cause the dreaded SoD (Sleep of Death) condition!
    • (Basic audio) 3.5mm support for RHOD400/500
    • Droidwall works out of the box now
    • Keyboard backlight now fades in/out
    • Gallery3D back in! Picasa Web Sync comes with it ;)
    • A couple new apps added to AndroidApps folder:
      • rpierce99's app GetLogs
      • Titanium Backup
    View
    13
    stinebd
    stinebd
    highlandsun said:
    Yay! No more "when is FRX07 coming out?" posts!
    Click to expand...
    Click to collapse

    And to that effect, I would like to personally apologize to everyone for how long it took. Life has been crazy busy the past couple months. Hopefully we'll get GRX01 out in a more timely manner. :D
    View
    11
    A
    arrrghhh
    Caveats:​

    • BT - works now! But audio doesn't route. See this thread if you're feeling adventurous and want to play with/don't mind using some unstable/incomplete code...
      NOTE: BT must be disabled in WinMo before booting Android or else you'll run into all sorts of odd issues...
    • WEP on wifi doesn't work. I heard an app called 'wifi-ace' (on the Market) fixes WEP!
    • If auto-brightness is enabled, the keyboard/button lights will fail at random. See this post for more scant details :p.
    View

New posts